Daxten VoyagerTouch 60 User manual

VoyagerTouch 60TM
VoyagerTouch 125HTM
VoyagerTouch 300TM
Video and touch system
Installation and Operation Manual vers. 1.0

2
LIMITED WARRANTY
Daxten warrants the VoyagerTouch™ to be in good working order for one year from the date of purchase
from Daxten or an authorised dealer. Should this product fail to be in good working order at any time
during this one year warranty period, Daxten will, at its option, repair or replace the Unit as set forth
below. Repair parts and replacement units will be either reconditioned or new. All replaced parts become
the property of Daxten. This limited warranty does not include service to repair damage to the Unit
resulting from accident, disaster, abuse, or unauthorised modification of the Unit, including static
discharge and power surges.
Limited Warranty service may be obtained by delivering this unit during the one year warranty period to
Daxten or an authorised repair centre providing a proof of purchase date. If this Unit is delivered by mail,
you agree to insure the Unit or assume the risk of loss or damage in transit, to prepay shipping charges to
the warranty service location, and to use the original shipping container or its equivalent. You must call
for a return authorisation number first. Under no circumstances will a unit be accepted without a return
authorisation number. Contact an authorised repair centre or Daxten for further information
ALL EXPRESS AND IMPLIED WARRANTIES FOR THIS PRODUCT INCLUDING THE WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, ARE LIMITED IN DURATION TO
A PERIOD OF ONE YEAR FROM THE DATE OF PURCHASE, AND NO WARRANTIES, WHETHER
EXPRESS OR IMPLIED, WILL APPLY AFTER THIS PERIOD. SOME COUNTRIES DO NOT ALLOW
LIMITATIONS ON HOW LONG AN IMPLIED WARRANTY LASTS, SO THE ABOVE LIMITATION MAY
NOT APPLY TO YOU.
IF THIS PRODUCT IS NOT IN GOOD WORKING ORDER AS WARRANTED ABOVE, YOUR SOLE
REMEDY SHALL BE REPLACEMENT OR REPAIR AS PROVIDED ABOVE. IN NO EVENT WILL DAXTEN
BE LIABLE TO YOU FOR ANY DAMAGES INCLUDING ANY LOST PROFITS, LOST SAVINGS OR
OTHER INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OF OR THE
INABILITY TO USE SUCH PRODUCT, EVEN IF DAXTEN OR AN AUTHORISED DEALER HAS BEEN
ADVISED OF THE POSSIBILITY OF SUCH DAMAGES, OR FOR ANY CLAIM BY ANY OTHER PARTY.
© Copyright 2003. All rights reserved.
No part of this manual may be reproduced, stored in a retrieval system, or transcribed in any form or any
means, electronic or mechanical, including photocopying and recording, without the prior written
permission of Daxten.
Printed in Denmark Revision 1.0 Manual Part No: 1034-21Tman
NOTE: This equipment complies with the requirements of European EMC directive 89/336 EEC in respect
of EN55022 Class B, EN 50082-1 and EN 60555-2.
This equipment has been found to comply with the limits for a Class A digital device, pursuant to Part 15
of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference
when the equipment is operated in a commercial environment. This equipment generates, uses, and can
radiate radio frequency energy and, if not installed and used in accordance with the instruction manual,
may cause harmful interference to radio communications. Operation of this equipment in a residential area
is likely to cause harmful interference in which casethe user will be required to correct the interference at
his own expense.

3
Thank you for choosing the Voyager Touch ™ system, designed for remote operation of
computers over long distances via CAT 5 cables.
By choosing the VoyagerTouch, you have assured that your installation is equipped for the
ever-increasing demands made in a modern computer-based information environment.
The Voyager touch system allows one computer to transmit a monitor image and
receive serial touch signals from a touchscreen.
Features
The Voyager Touch local unit connects directly to the computer
Different remote end units can be used:
•VoyagerTouch 60 Remote for up to 60 m distance
•VoyagerTouch 60PCB Remote for up to 60 m distance for building in monitors
•VoyagerTouch 125H Remote for up to 125m distance
•VoyagerTouch 300 Remote for up to 300 m distance
•Up to 300 meters in one line without repeater
•For distances up to 1200 m a video repeater and a video-delayline compensator
might be necessary.
Operation
The Voyager touch is simple to operate, no need for driver or software installation.
Compatibility
This product has been tested with a wide variety of Touch panels and LCD monitors.
However, it is impossible to guarantee correct operation with every monitor currently on the
market.
The VoyagerTouch is compatible with the following equipment:
•Monitor: VGA, SVGA, XGA, SXGA, UXGA
•Computers: all computers using a HD-15 VGA output and standard VGA signals
•RGB and two sync signals H/V
•Serial touch equipment with one way communication
INTRODUCTION

4
All versions of the models are listed here
Package Content
The VoyagerTouch 60 kit includes: ( 1034-01MTkit)
1 VoyagerTouch Local (1034-21TL)
1 VoyagerTouch 60 Remote (1034-01MTR)
2 Power Transformer and mains cord* (9014-00F-AW)
1 VGA Cable ( 2051-02T )
1 Serial Cable Crossed for Local ((KT02-013880))
1This user manual
OR
The VoyagerTouch 125H kit includes: ( 1034-01HTkit)
1 VoyagerTouch Local (1034-21TL)
1 VoyagerTouch 125H Remote (1034-01HTR)
2 Power Transformer and mains cord* (9014-00F-AW)
1 VGA Cable ( 2051-02T )
1 Serial Cable Crossed for Local (KT02-013880)
1 This user manual
OR
The VoyagerTouch 300 kit includes: ( 1034-01Tkit)
1 VoyagerTouch Local (1034-21TL)
1 VoyagerTouch 300 Remote (1034-21MTR)
2 Power Transformer and mains cord* (9014-00F-AW)
1 VGA Cable ( 2051-02T )
1 Serial Cable Crossed for Local ((KT02-013880))
1This user manual
* power supply type depends of the country.
On request you can get the VoyagerTouch 60 PCB buildt in, into your Touchscreen.
GETTING STARTED

5
VoyagerTouch 60
VoyagerTouch 125H /300
CONNECTORS ON VOYAGER TOUCH
UTP OUT
VGA INVoyagerTouch
Local
VoyagerTouch 60
Serial in
BG
R
VGA out9-20V DC UTP in
Remote
LCD/Touch
PC
PSU
230V AC
PSU
230V AC
PSU
230V AC UTP
UTP OUT
VGA IN
VoyagerTouch
Local
LCD/Touch
PC
PSU
230V AC
PSU
230V AC
PSU
230V AC
UTP
UTP OUT
VGA IN
Remote
UTP IN
9-24 V DC
EQ GAIN
Please notice:
•The »UTP OUT« connector on the
front of some versions of the
Remote box has no function in this
configuration
•The »UTP IN« connector on the
back of some versions of the Local
box has no function in this
configuration
Please notice:
•The »UTP IN« connector on the
back of some versions of the Local
box has no function in this
configuration.

6
VoyagerTouch 60 Remote
Sharing supply with a monit
VoyagerTouch Remote 60
BGR
VGA out
9-20V DC UTP in
The color and gain can be adjusted by turning the Blue Green and Red screws
If the light and brightness is still to weak use the adjustments on the monitor.
CONNECTORS ON VOYAGER TOUCH
B
G
R
VGA out9-20V DC UTP in
LCD/Touch
PSU
230V AC
LCD PSU 9-20 V DC
Serial
VGA
Power Cable
for LCD
UTP

7
VoyagerTouch Remote 125H
UTP IN
9-24 V DC
EQ GAIN
With EQ and Gain the picture can be adjusted for best quality.
VoyagerTouch Remote 300
UTP IN
9-24 V DC
EQ GAIN
With EQ and Gain the picture can be adjusted for best quality.
Please Notice ! inside the VoyagerTouch Remote 300 the distance of the cat5 cable is to be
set by microswitches.
As default the distance is set to maximum 300 M. Access to the switches changes is possible
by opening the top cover of the unit.
Before connecting the Voyager Touch extension please make sure that the Touch screen is
functioning correctly by connecting it directly to the PC’s serial port.
As mentioned previously, the system will work as a “plug & play” unit when connected. See
diagrams for connections.
ADJUSTMENTS
R G B
200-300 M
100-200 M
0-100 M
R
G
B
2
0
0
-
3
0
0
M
1
0
0
-
2
0
0
M
0
-
1
0
0
M

8
Video
No picture on the Remote.
If the Green LED on the unit is off -Power is missing
If the transmitter unit is working, check local out
Check the cables
Problems with colors.
Check the UTP cabling if you have problems with the colors
If the picture is unstable and contains noise, check the ground.
Touch is not responding
Make sure that the touch system is working when connected directly to the computer
If Touch system is not working when connected to the remote unit-check cables and
power supply.
Touchdriver on Pc is set to load automatically
Maintenance and repair
The unit does not contain any user-serviceable parts inside. Any malfunction of the unit should
be reported to a factory-authorised repair center for service. Any discrepancies in the
operation of the unit according to this manual should be reported to the Technical Support
Department of Daxten.
Technical support
If you cannot determine the nature of a problem, please call Daxten and ask for Technical
Support. If possible call from a phone located near the unit we may be able to solve your
problem directly over the phone. If we cannot solve your problem, and determine that the
fault is in the unit, we will issue a Return Material Authorisation (RMA) number that must
appear on the outside of all returned products. The unit should be double-packed in the
original container, insured, and shipped to the address given to you by our Technical Support
representative.
TROUBLE SHOOTING
SERVICE INFORMATION

9
VoyagerTouch Local
Size 215 x 105 x 44 mm (8.46 x 4.13 x 1.73 in.)
Weight 0.80Kg (1.77lbs)
Power Consumption Max. 400mA (start peak 1,3A)
Recommended Input Power Regulated DC 12V/1,3A or 9V/2A
VoyagerTouch 125H Remote
Size 215 x 105 x 44 mm (8.46 x 4.13 x 1.73 in.)
Weight 0.80Kg (1.77lbs)
Power Consumption Max. 750 mA with UTPin module
Recommended Input Power Regulated DC 12V/1,3A or 9V/2A
VoyagerTouch 300 Remote
Size 215 x 105 x 44 mm (8.46 x 4.13 x 1.73 in.)
Weight 0.80Kg (1.77lbs)
Power Consumption Max. 750 mA with UTPin module
Recommended Input Power Regulated DC 12V/1,3A or 9V/2A
VoyagerTouch 60 Remote
Size 160 x 65 x 28 mm (6.30 x 2.56 x 1.10 in.)
Weight 0.35 Kg (0.77lbs)
Power Consumption Max. 120 mA
Recommended Input Power Regulated DC 12V/1,3A or 9V/2A
VoyagerTouch Remote 60 PCB
Size 160 x 65 x 28 mm (6.30 x 2.56 x 1.10 in.)
Weight 65 g (0.1 lbs)
Power Consumption Max. 150 mA
Recommended Input Power 5V or 7-24V from moitor
Please note that these specifications are subject to change without prior notice.
APPENDIX A. GENERAL SPECIFICATIONS

Unit 5 Distribution Centre
Shannon Free Zone
Shannon, Co. Clare
Ireland
[email protected]
www.daxten.ie
Tel: [phone]
Fax: [phone]
•
1579 Lexington Road
Green Oaks, IL 60048
USA
[email protected]
www.daxten.us
Tel: [phone]
Fax: [phone]
•
4 Harp Business Centre
Apsley Way
London NW2 7LW
United Kingdom
[email protected]
www.daxten.co.uk
Tel: [phone]
Fax: [phone]
•
C/Florian Rey, 8
Entreplanta
50002 Zaragoza
España
[email protected]
www.daxten.com
Tel: [phone]
Fax: [phone]
•
B.P 04 -77
Route de Cheptainville
91630 Marolles-en-
Hurepoix
France
[email protected]
www.daxten.com
Tel: [phone]
Fax: [phone]
•
Udviklingsparken
Sønderhøj 46
8260 Viby J
Denmark
[email protected]
www.daxten.dk
Tel: [phone]
Fax: [phone]
•
Künstlergasse 11/4
1150 Wien
Österreich
[email protected]
www.daxten.at
Tel: [phone]
Fax:[phone]
•
Salzufer 16, Geb. B
10587 Berlin
Deutschland
[email protected]
www.daxten.de
Tel: [phone]
Fax:[phone]
•
Seebahnstr. 231
8004 Zürich
Schweiz
[email protected]
www.daxten.com
Tel: [phone]
Fax: [phone]
•
www.daxten.com