dB Technologies Opera REEVO 212 Manual

OPERA REEVO 420120426Q REV1.0
QUICK START USER MANUAL SECTION 1
1[email protected]
OPERA REEVO is the new active speaker series
designed for small live contests. The acoustic design
combines coaxial mid-high driver with neodymium
woofers and delivers very high SPL in a compact size
thanks to the powerful Digipro amplifier. The series
consists in two models, OPERA REEVO 210 (10”
neodymium woofer) and OPERA REEVO 212 (12”
neodymium woofer), that can be easily adapted to
multiple situations thanks to the different possible
mounting configurations. The DSP on board allows
quick equalization between different presets.
•Unique design
•Impressive sound pressure
•Compact size
•Quick installation
•Multiple configuration options
The box contains:
•n.1 OPERA REEVO speaker
•n.1 mains cable
•n.1 fuse
•n.1 transport cover
•This quick start and warranty documentation
DESCRIPTION
PACKAGE CONTENTS
MAIN FEATURES
H
D
W
DIMENSIONS
Speaker Type Quasi 3-Ways Active
Loudspeaker
Quasi 3-Ways Active
Loudspeaker
Frequency Respon-
se [-6dB] 52 Hz - 19.2 kHz 60 Hz - 19.2 kHz
Usable Bandwith
[-10dB] 48 Hz - 20 kHz 54 Hz - 20 kHz
Max SPL (1 m) 133 dB 132.5 dB
Directivity (HxV) 100° x 80° 100° x 90°
HF 1 - 1.75” v.c. 1 - 1.75” v.c.
LF 2x 12” neodymium,
2.5” v.c.
2x 10” neodymium,
2.5” v.c
Crossover Fre-
quency 1260 Hz - 24 dB/oct 1260 Hz - 24 dB/oct
Amplifier Digipro G2 1050 W RMS Class-D
Power Supply VDE
Cooling Passive (convenction)
Operating Range 220-240V~ (50-60Hz)/110-120V~ (50-60 Hz)
Limiter Peak, RMS, Thermal
Processing FIR Linear Phase Filters
Controller 28/56 bit DSP
AD/DA Converter 24 bit/48 kHz
Controls
1x Level knob
1x Preset button
2x System LED
2x Preset LED
Signal Input 1 x combo XLR/jack balanced
Signal Output 1x XLR balanced
Housing Polypropylene with external supports
Pole mount 36mm
Rigging Points 3 (M10)
Dimensions
(WxHxD)
345x690x376 mm
(13.6x27.2x14.8 in)
300x604x324 mm
(11.8x23.8x12.8 in)
Weight 20.4 Kg (45 lbs.) 17.2 Kg (38 lbs.)
OPERA REEVO
212
OPERA REEVO
210
W 345mm 300mm
H 690mm 604mm
D 376mm 324mm

OPERA REEVO 420120426Q REV1.0
QUICK START USER MANUAL SECTION 1
2[email protected]
220-240V~ 50-60Hz 1.3A
(T3.15 L 250V~)
FUSE
ON
OFF
POWER
MAINS INPUT
 CAUTION
RISK OF ELECTRICAL SHOCK
DO NOT OPEN
 ATTENTION
RISQUE DE CHOCH ELECTRIQUE
NE PAS OUVRIR
AEB INDUSTRIALE S.R.L.
Via Brodolini, 8
Località Crespellano
40053 VALSAMOGGIA (BO)
ITALY
This device complies with part 15 of the FCC
Rules. Operation is subject to the following two
conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any
interference received, including interference that
may cause undesired operation.
(REPLACE FUSE WITH SAME RATINGS)
(REMPLACER LE FUSIBLE AVEC LE MÊME TYPE)
Internal voltage setup
110-120V~ 50-60Hz 2.6A
(T6.3A L 250V~)
Serial N.
1
6
5
2
4
7
8
3
I/O and Control panel
The amplifier of OPERA REEVO is controlled by a state-
of-the-art DSP. All the connections and controls are in
the amplifier control panel.
1- Balanced audio input
2- Status LEDs (Limiter, Signal)
3- Level knob
4- Link output
5- Presets button
6- Presets LED
7- Mains input
8- Mains fuse
9- On/Off switch
Setup, turn on and I/O settings
Connect first the audio source to the Balanced Input
(1) using an XLR or jack TRS balanced cable. Use Link
Output (4) to connect other speakers in daisy chain.
Connect the included VDE mains cable to the mains in-
put (7) and push the On/Off switch (9) to power up the
speaker. Adjust the audio level and choose the equali-
zation preset (5) depending on the application.
9
POWER SUPPLY SPECIFICATIONS (POWER ABSORPTION)
Draw at 1/8 of full power in average use conditions (*): 1.6 A (220-240V~) - 2.6 A (100-120V~)
Draw at 1/3 of full power in average use conditions (**): 3.1 A (220-240V~) - 5.2 A (100-120V~)
Power absorption with speaker turned on without signal (idle): 31 W (220-240V~) - 31 W (100-120V~)
*INSTALLER NOTES: The values refer to 1/8 of full power, in average operating conditions (music program with infrequent or no clipping). It is recommended to consi-
der them the minimum sizing values, for any type of conguration.
**INSTALLER NOTES: The values refer to 1/3 of full power, in heavy operating conditions (music program with frequent clipping or activation of the limiter. We recom-
mend sizing according to these values in case of professional installations and tours.
HANDLES
OPERA REEVO are equipped with two handles for
easy transport (A).
MECHANICAL FIXING POINT
OPERA REEVO can be installed in different configurations. On the
top and on the back (B) the user can find mechanical fixing points
for flyable use; the loudspeakers are equipped with a pole mount
on the bottom (C).
A
A
B
C
B
B

OPERA REEVO 420120426Q REV1.0
QUICK START USER MANUAL SECTION 1
3[email protected]
CONFIGURATIONS
STACKED FLOWN
STAND/POLE
(Ø36mm) WEDGE EYEBOLTS
(M10)
EMI CLASSIFICATION
According to the standards EN 55032 and 55035 this is a Class A equipment, designed and suitable to operate for profes-
sional use.
Warning: This equipment is compliant with Class A of CISPR 32. In a residential environment this equipment may cause
radio interference
FCC CLASS A STATEMENT
Any changes or modications not expressly approved by the party responsible for compliance could void the user’s autho-
rity to operate the equipment.
This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the
FCC Rules.
These limits are designed to provide reasonable protection against harmful interference when the equipment is operated
in a commercial environment.
This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with
the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a resi-
dential area is likely to cause harmful interference in which case the user will be required to correct the interference at his
own expense.
WARNING: Make sure that the loudspeaker is securely installed in a stable position to avoid any injuries or damages
to persons or properties. For safety reasons do not place one loudspeaker on top of another without proper fastening
systems. Before hanging the loudspeaker check all the components for damages, deformations, missing or damaged parts
that may compromise safety during installation. If you use the loudspeakers outdoor avoid spots exposed to bad wea-
ther conditions. Contact dBTechnologies for accessories to be used with the speakers. dBTechnologies will not accept any
responsibility for damages caused by inappropiate accessories or additional devices.
Features, specication and appearance of products are subject to change without notice.
dBTechnologies reserves the right to make changes or improvements in design or manufacturing without assuming any
obligation to change or improve products previously manufactured.
IMPORTANT NOTES AND WARNINGS

OPERA REEVO 420120426Q REV1.0
QUICK START USER MANUAL SECTION 1
4[email protected]
IMPORTANT SAFETY INSTRUCIONS
1.Read these instructions
2.Keep these instructions.
3.Heed all warnings.
4.Follow all instructions.
5.Do not use this apparatus near water.
6.Clean only with dry cloth.
7.Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.
8.Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including ampliers)
that produce heat.
9.Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wi-
der than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong
are provided for your safety. If the provided plug does not t into your outlet, consult an electrician for replacement of the
obsolete outlet.
10.Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point
where they exit from the apparatus.
11.Only use attachments/accessories specied by the manufacturer.
12.Use only with the cart, stand tripod, bracket, or table specied by the manufacturer, or sold with the apparatus. When a
cart is used, use caution, when moving the cart/apparatus combination to avoid injury from tip-over.
13.Unplug this apparatus during lightning storms or when unused for long periods of time.
14.Refer all servicing to qualied service personnel. Servicing is required when the apparatus has been damaged in any
way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus the
apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.
ADDITIONAL SAFETY INSTRUCTIONS
• No naked ame sources, such as lighted candles, should be placed on the apparatus
• Do not use the apparatus in tropical climates
WARNINGS!
Only expert personnel may use the product and its accessories! To prevent hazards to people, animals and/or objects,
make sure that the installation is stable and secure. Comply with the safety regulations and laws in force in the country in
which you use the product. For safe use, periodically check that all parts are in good working condition before use. Only
authorised personnel may carry out design, calculations, installation, testing and maintenance of professional own or
stacked audio systems. AEB Industriale shall not be liable for improper installation carried out without adequate safety
measures.
Never suspend the speakers from the handles! Only use the accessories and congurations described in this manual, and
proceed in accordance with the instructions given in the manuals for the accessories.
Do not obstruct the amplier cooling ns at the back. In the event of overheating, the audio volume is gradually reduced
until the module is thermally stable. The level is automatically restored on reaching the correct operating temperature.
Do not attempt to open the amplier.
In the event of malfunction, immediately turn off the power, disconnect the unit from the mains and contact an authori-
sed service centre.
Only use the power cable provided.
Do not use the monitor for a prolonged period with the limiter LED steadily lit or ashing as this indicates operation un-
der stress with excessive distortion.
Check periodically the integrity and the functionality of the accessories and the technical equipments for a safe installa-
tion. User should never apply a load that exceeds the working load limits of any rigging components or equipment here
presented. Design, calculation, installation, testing and maintanance of suspension and stack systems for audio equipment
must be performed only by qualied and authorized personnel. AEB Industriale s.r.l. denies any and all responsibility for
improper installations, in the absence of safety requirements.
Scan with your
QR Reader App
to download the
complete User
Manual.
QQRRCCooddeetteexxtthttps://www.dbtechnologies.com/qrcode/001105/
DDaatteeccrreeaatteedd22-11-2022 16:17 04
DDeessccrriippttiioonnproduct name: Opera Reevo 210
IDnode: 8810
IDlanguage: 267
language: English
field: manual
A.E.B. Industriale Srl
Via Brodolini, 8
Località Crespellano
40053 VALSAMOGGIA
BOLOGNA (ITALIA)
Tel. [phone]
Fax [phone]
www.dbtechnologies.com
[email protected]