DCN WL8200-X10 User manual

DCN WL8200-X10 Wireless AP
Operation Manual
·

- 1 -
1Preface ................................................................................................................................- 4 -
1.1 Manual Description .........................................................................................- 4 -
2AP Basic Operations ........................................................................................................- 5 -
2.1 WEB Login..........................................................................................................- 5 -
2.2 AP Mode.............................................................................................................- 6 -
2.3 Running Status..................................................................................................- 6 -
2.4 Statistics..............................................................................................................- 7 -
2.4.1 Flow Statistics............................................................................................- 7 -
2.4.2 Radio Statistics..........................................................................................- 7 -
2.4.3 Client Statistics..........................................................................................- 7 -
2.5 System Maintenance.......................................................................................- 8 -
2.5.1 Modify Password......................................................................................- 8 -
2.5.2 Configuration Management..................................................................- 8 -
2.5.3 System Log.................................................................................................- 9 -
2.5.4 Radius Template .................................................................................... - 10 -
2.5.5 Authentication Management............................................................. - 11 -
2.5.6 SNMP Configuration ............................................................................ - 12 -
2.5.7 SSL Certificate Management.............................................................. - 13 -
3FIT AP Mode................................................................................................................... - 14 -
3.1 System Settings ............................................................................................. - 16 -
3.1.1 Ethernet Settings................................................................................... - 16 -
3.1.2 Manage AC Settings............................................................................. - 18 -

- 2 -
3.1.3 WDS Settings.......................................................................................... - 20 -
4FAT Bridge Mode........................................................................................................... - 22 -
4.1 Setup Wizard.................................................................................................. - 23 -
4.2 Basic Settings ................................................................................................. - 25 -
4.2.1 Ethernet Settings................................................................................... - 25 -
4.2.2 Wireless Settings ................................................................................... - 26 -
4.3 Advanced Settings........................................................................................ - 29 -
4.3.1 Radio Settings........................................................................................ - 29 -
4.3.2 WDS Settings.......................................................................................... - 29 -
4.4 System Maintenance.................................................................................... - 31 -
4.4.1 IP Session Control................................................................................. - 31 -
4.4.2 Network Timing..................................................................................... - 32 -
5FAT Routing Mode ........................................................................................................ - 33 -
5.1 WEB Login....................................................................................................... - 34 -
5.2 Setup Wizard.................................................................................................. - 34 -
5.3 Network Parameter Settings...................................................................... - 37 -
5.3.1 LAN Port Setting.................................................................................... - 37 -
5.3.2 WAN Port Settings................................................................................ - 38 -
5.4 Wireless Settings........................................................................................... - 42 -
5.5 Radio Settings................................................................................................ - 44 -
5.6 DHCP Server................................................................................................... - 44 -
5.6.1 DHCP Server........................................................................................... - 44 -

- 3 -
5.6.2 Client List................................................................................................. - 45 -
5.6.3 Static IP Distribution............................................................................. - 46 -
5.7 System Maintenance.................................................................................... - 48 -
5.7.1 IP Session Control................................................................................. - 48 -
5.7.2 Network Timing..................................................................................... - 49 -
Appendix A FAQS........................................................................................................................ - 51 -

- 4 -
1Preface
1.1 Manual Description
This manual mainly helps users use AP products correctly with the three
working modes of AP.
FIT AP Mode
FAT AP Bridge Mode
FAT AP Routing Mode
This manual takes the WL8200-X10 as an example for configuration. Because there are certain
differences in hardware and software specifications for each model, all issues involving product specifications
need to be confirmed with Yunke China Information Technology Limited.
1.2 Conventions
In this manual,
For nouns such as buttons on the page, use "" to indicate them, such as "Edit"；
Use >> to indicate the sequence of entering the configuration interface, such
as "first-level menu" >> "second-level menu";
This manual also uses various eye-catching signs to indicate places that should be paid special
attention to during operation. As following:
Caution & Attention: Remind the matters needing attention in the operation, and improper operation
may cause the setting to be invalid, data loss or equipment damage.
Instructions & Tips: Make necessary additions and explanations to the description of the operation
content.

- 5 -
2AP Basic Operations
2.1 WEB Login
Use POE (or local power) to charge the AP, connect the network port of the
management computer to the AP's LAN port (or the management host connects to
the AP's WLAN wirelessly), open the browser (recommended: Google, Firefox or
IE11) and enter the management IP address on the LAN side (the default is
https://192.168.1.10) to access the web configuration interface of the wireless AP.
The default login user name is admin, and the password is admin.
If the AP has no LAN port or no wired client, you can use the wireless client
to connect to the AP's SSID (the default is DCN_WLAN) to access the AP.
If the network accessed by the AP has a DHCP server, the address of the AP
may be obtained dynamically. In this situation, the user should access the current IP
address of the AP.

- 6 -
2.2 AP Mode
After logging into the AP's WEB page, if you want to switch to a certain mode,
you can switch to the specified mode by clicking "AP Mode" on the left menu. As
following:
2.3 Running Status
After logging into the system, the homepage displays the system running status,
including device information, network information, wireless information and system
resource status. Ticking "Turn on Auto Refresh" in the system resource status panel,
the interface will display the CPU utilization and memory utilization in real time, and
refresh every 5 seconds.

- 7 -
2.4 Statistics
The statistics contains three parts: flow statistics, radio statistics and client
statistics.
2.4.1 Flow Statistics
Flow Statistics interface shows the message sent and received by different SSIDs.
As following:
2.4.2 Radio Statistics
Radio statistics interface displays different radio statistics sending and receiving
message information from radio statistics perspective. As following:
2.4.3 Client Statistics
Client statistics list displays all client information related with the device,
including client IP address, client MAC address, SSID, radio, channel, RSSI, portal
authenticated status, up-time, etc. As following:

- 8 -
2.5 System Maintenance
2.5.1 Modify Password
Click "System Maintenance">>"Modify Password" on the left menu, you can
modify the username and password on the AP management interface. When
modifying password, enter the original password first, then enter the new password
twice, and click "Save ". As following:
2.5.2 Configuration Management
In this interface, the user can perform related operations such as configuration
import and export, restore factory setting, system upgrade, reboot, etc. As following:

- 9 -
After the device is reset to factory default, all configurations will be deleted and
restored to FIT mode.
2.5.3 System Log
The diagnostic log interface displays the latest log information of the device. It
is divided into two sections: remote host and local log.
The remote host includes the log host IP address and the log host port
configuration, which can store device logs to a remote syslog server.
The local log supports the log level setting and log packaging export function.
Click the "Export Log" to package and download all log information to the local. As

- 10 -
following:
2.5.4 Radius Template
Click" System Maintenance ">>" Radius Template " to maintain the Radius
server template. As shown in Figure 23:：
(1) Radius template name, authentication server IP address, and authentication
service shared key are required;
(2) The accounting server IP and the accounting shared key are optional. Both
of them must be filled in or not filled in at the same time, otherwise the system
prompts that they cannot be saved normally.
(3) The key requires 1-64 non-Chinese characters.

- 11 -
2.5.5 Authentication Management
Click “System Maintenance”>>“Authentication Management”, the user can
see authentication management configuration and Telnet status. As shown in Figure
24:
(1) Select local authentication and save it directly.
(2) To select Radius server authentication, you need to select a Radius server.
This Radius server has been maintained in the "Radius server template".
Click “System Maintenance”>>“Authentication Management”, the user
can see authentication management configuration and Telnet status. Choose to
open or close telnet and save it.

- 12 -
2.5.6 SNMP Configuration
Click “System Maintenance”>>“SNMP Configuration” to configure
SNMP related information. As shown in Figure 25:

- 13 -
2.5.7 SSL Certificate Management
Click " System Maintenance ">>"SSL Certificate Management " to upload
the SSL certificate. As shown in Figure 26:

- 14 -
3FIT AP Mode
When there are a large number of APs on the network, the configuration or
management one by one will become more complicated. At this time, it is suitable
to use the FIT AP mode + AC (AP controller) for unified management and
configuration, thereby reducing the configuration and management costs.
The typical topology is as following:

- 15 -
The AP is shipped in FIT AP mode by default. You can also switch to FIT AP
mode by restoring the factory setting or following the instructions in the AP mode
chapter. The wireless configuration of the FIT mode is operated uniformly through
the AC. For details about this part, please refer to the DCN related AC operation
manual. Here, the AP's wired configuration, AC address setting, WDS configuration,
and system management are mainly introduced.
AP
POE Switch
Internet
Gateway AC
AP AP

- 16 -
3.1 System Settings
3.1.1 Ethernet Settings
Click "System Settings">>"Ethernet Settings" on the left menu to enter the AP
Ethernet setting interface. In default, the current status of the uplink port (usually
the POE interface) and the downlink port of the AP are displayed. As following:

- 17 -
If you need to modify the related setting of the uplink port, you can click the
"Edit" at the bottom of the interface to edit setting, where you can set the AP
wired VLAN and the IP address configuration mode of the AP. As following:

- 18 -
3.1.2 Manage AC Settings
Click "System Settings">>"Manage AC Settings" on the left menu to enter the
AC management setting interface. From this page, you can view the static AC
management address of the current AP setting. If you need to configure the
address of the static management AC, you can click the "Edit" at the bottom of the
page to enter the setting page, where you can configure multiple IP (v6) addresses
of the management AC or domain names of the management AC. As shown
below:

- 19 -
Tip: In addition to static AC IP or AC domain name to find AC, you can also
actively find AC through DHCP option. For details, refer to DCN AC related
manuals or consult DCN staffs.