
03
02
USING YOUR COFFEE GRINDER
Carefully unpack your coffee grinder and remove all packing
material. To remove any dust that may have accumulated
during packaging, wipe the grinding chamber, blades with a
damp lint-free cloth or sponge. Use extreme care as the blades
are sharp. The transparent cover can be immersed in water for
cleaning. Dry thoroughly.
Caution: Never immerse the motor base in water for cleaning,
or fill the grinding chamber with water for cleaning.
KNOW YOUR COFFEE GRINDER
This appliance has a polarized plug (one blade is wider than
the other). To reduce the risk of electric shock, this plug will fit
in a polarized outlet only one way. If the plug does not fit fully
into the outlet, reverse the plug. If it still does not fit, contact a
qualified electrician. Do not modify the plug in any way.
NOTES ON THE CORD PLUG
Place the coffee grinder on a flat surface.
Pour coffee beans into the grinding chamber, it must be noted
the quantity of coffee beans shall not exceed 60g.
Press the on/off button and hold the lid on tight while the
coffee is ground.
Aer grinding ,unplug the appliance and empty the coffee grinder.
NOTE: Do not operate this appliance continuously for more
than 45 seconds, Allow appliance to cool down for 3 minute
between two continuous cycles.
View the consistency of coffee grounds from the transparent
cover.
IMPORTANT: If you want to remove the cover to check the
consistency of the coffee grounds. It must be noted never
remove the cover until blades come to a complete stop.
Once the desired grind has obtained, unplug the power cord
from the outlet.
Remove the transparent cover, pour out the coffee ground
directly.