decakila KUCF011B User manual

KUCF011B
COFFEE GRINDER

IMPORTANT SAFEGUARDS
KNOW YOUR COFFEE GRINDER
COFFEE GUIDER OVERVIEW
ELECTRIC PARAMETER
USING THE COFFEE GRINDER
SETTING AND RUNNING THE GRINDER
COFFEE GRINDER USE TIPS
CARE AND CLEAN
TROUBLESHOOTING
01
02
03
04
04
05
07
07
09
CONTENTS

01
IMPORTANT SAFEGUARDS
Before using the electrical appliance, the following basic precautions should always be followed including the following:
Read all instructions.
Before use please check that the voltage of wall outlet corresponds to the one shown on the rating plate.
Do not operate any appliance with a damaged cord or plug or aer the appliance malfunctions, or is dropped or damaged in any
manner. Return appliance to the nearest authorized service facility for examination, repair, electrical or mechanical adjustment.
Switch o the appliance and disconnect from supply before changing accessories or approaching parts that move in use.
Do not let cord hang over edge of table or hot surface.
Do not immerse the motorized base in liquid, or place in dishwasher.
Close supervision is necessary when your appliance is being used near children or inrm persons.
Ensure ngers are kept well away from the moving parts.
Do not remove the lid until the blade has completely stopped.
Do not attempt operation without the lid being in place.
The use of attachments not recommended or sold by the manufacturer may cause re, electric shock or injury.
Check the bean box for the presence of any foreign objects before using.
To protect against risk of electrical shock, do not put the Coee Grinder in water or other liquid.
Appliance can be used by persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they
have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved.
Children shall not play with the appliance.
This appliance shall not be used by children.Keep the appliance and its cord out of reach of children.
Misuse may cause potential injury.
Care shall be taken when handling the sharp cutting blades and during cleaning.
Turn the appliance OFF, then unplug from the outlet when not in use, before assembling or disassembling parts and before
cleaning. To unplug, grasp the plug and pull from the outlet. Never pull from the power cord.

02
Make sure appliance is OFF when not in use, before putting
on or taking o parts, and before cleaning.
Avoid contacting moving parts.
Do not operate the appliance for other than its intended
use.
Do not use outdoors.
1. Bean box lid
2. Bean box
3. Start/Stop Button
4. Dose Selection Knob
5 .Container lid
6. Ground Coee Container
7. Cleaning brush
8. Coee spoon
SAVE THE INSTRUCTIONS
HOUSEHOLD USE ONLY
This appliance incorporated a polarized plug (one blade is
wider than the other). To reduce the risk of electric shock,
this plug will t in a polarized outlet only one way. If the plug
can not fit fully into the socket, reverse the plug. If it still
does not t, contact a qualied electrician. Do not attempt
to modify the plug in any way as this is a safety feature.
KNOW YOUR COFFEE GRINDER
NOTE: The Bean box holds a maximum of 250g of coffee
beans, the Ground Coffee Container holds a maximum of
130g of ground coee.
NOTE: The cleaning brush can be only used for cleaning the
appliance aer use.

03
COFFEE GUIDER OVERVIEW
Your Coee Grinder has 35 unique grind size settings that are suitable for a range of brewing methods, from the nest setting for
espresso to the coarsest setting for french press. By adjusting the Dose Selection Knob, you can choose from 2 to 12 cups of coee as
desired.
Coee Grind Setting Chart
Coee Type French Press Drip coee Espresso
Grind size Coarse Medium Fine
Grind size range
Dose Selection 2-12 cups 2-12 cups 2 cups
Default maximum grind time 55S (12 cups) 55S (12 cups) 18S (2 cups)
Use setting with Ground coee container Ground coee container Ground coee container

04
ELECTRIC PARAMETER
Rated voltage: AC120V；
Rated frequency: 60Hz；
Rated power: 200W；
USING THE COFFEE GRINDER
1. Before rst use, clean all parts and accessories. (See “Cleaning
the Coee Grinder” section).
2. Place the Coee Grinder on a dry, at, level surface such as a
countertop or table.
2Rotate the bean box clockwise to
lock it, and then the grind size can
be adjusted.
1
Install the bean box into the correct
position of the appliance.
Make the positioning ribs at the
bean box align with the grooves at
the main body. The bean box can
be removed when the icon “ ”at
the bean box aligns with the icon
“ ”.
3
To adjust the grind size, rotate
the bean box clockwise, the grind
size will become fine gradually;
Rotate the bean box anticlockwise,
the grind size will become coarse
gradually.

05
4Open the bean box lid and add coee beans
(freshly roasted). Replace the lid.
5
Use with ground coee container:
Put the ground coffee container
(with the sealing ring opened)
under the ground coffee outlet to
collect ground coee in the ground
coee container.
Sealing ring
SETTING AND RUNNING THE
GRINDER
TIP: Refer to the “Coee Grind Setting chart” for preset settings.
Experiment with the dierent grind size, dose and time settings
to achieve your desired taste.
WARNING: The appliance can not work for 3 minutes
continuously within 10 minutes, and it must rest for 30 minutes
if the working time exceeds 3 minutes.
1
Plug into a power outlet.
Rotate the bean box to select the
grind size ranging from 1 (Fine) to
35 (Coarse) . Refer to the “Coffee
Grind Chart”.

06
2
Rotate the Dose Selection Knob to
select the number of cups or shots
(rotate clockwise to increase; rotate
counterclockwise to decrease).
French press, Drip coee: You can
select between2 - 12 cups.
Espresso: You can select between 2
shots.
NOTE: The maximum grinding time
is the time for grinding 12 cups of
ground coee.
3
Press Start/Stop button to begin
grinding operation as per selected
grind size and dose.
Grinder will stop automatically
when the selected dose is nished
grinding.
4
You can pause the Coffee Grinder
by pressing the Start/Stop button,
if desired. This helps to settle coee
grounds in the Ground Coffee
Container.
5
The coee grinder will not work
when the Dose Selection Knob
turns to “OFF” .

07
COFFEE GRINDER USE TIPS
1. Freshly ground coffee is the key to making coffee with
more avor and body.
2. Use freshly roasted coee beans with a ‘roasted on’ date to
maximize avor, not a use-by or best before date.
3. Use coee beans between 5 and 20 days aer the ‘roasted
on’ date for optimal freshness.
4. Coffee flavor and strength is a personal preference. Vary
the type of coffee beans, amount of coffee and fineness of
grind to achieve the avor you prefer.
5. Store coee beans in a dark, cool and dry place. Vacuum
seal if possible.
6. Buy whole beans in small batches to reduce the storage
time of coee beans.
7. Once coffee is ground, it quickly loses its flavor and
aroma. For the best results, grind beans immediately before
brewing.
8. When storing the appliance, run grinder empty to clear
ground beans le in chamber.
9. Run grinder for 10-15 seconds to purge some coee before
each use, for maximum freshness.
10. Clean the bean box and conical burrs regularly.
It is best to change the grind size while the Coee Grinder is
running.
CARE AND CLEAN
NOTE: Unplug the Coee Grinder before cleaning.
IMPORTANT: To avoid damage, never wash or immerse the main
body of Coee Grinder, burrs, or power cord in water, or place in
the dishwasher.
CLEANING THE BURRS
If the Coffee Grinder is used frequently, the burrs should be
cleaned regularly for the best performance and especially
important when grinding for espresso coee. Cleaning enables
the burrs to achieve the nest, most consistent grinds possible
every time.
1
The bean box, bean box lid, ground
coee container and container lid
can be cleaned with warm, soapy
water, then rinse with clean water
and dry thoroughly.
2Wipe clean the main body of Coee
Grinder with a so, damp cloth. Dry
thoroughly with a so dry cloth.

08
1
Empty the bean box. Remove the
lid and the bean box.
2Remove the upper burr.
3
Clean the upper burr with the
cleaning brush.
4
Clean the lower burr with the
cleaning brush or use a vacuum
cleaner to remove coee residue.
5
Install the upper burr well in
position.
6
Install the bean box and bean box
lid well in position.
Upper burr
Lower burr