DeDietrich 7897 User manual

INDUCTION HOB
& BUILT-IN HOOD
EN USER GUIDE

•0
CUT AREA
00288

1.2.2
1.2.3
800
490
515
60
745
55
800
803
745
490
515
518
R3
60
R3
5
10
10
40
1.1
K7HHDDAD0
20-45-00249
220-240V ~ 50/60Hz
.
.
DPI7888X-1
service :type :LL8ZZX1F Nr.
.
.
ISM GROUPE 2 CLASSE B
.
Made in France
7400 W
..
DPI7888X
.
K7HHDDAD0
20-45-00249
220-240V~50/60Hz
.
.
DPI7888X-1
service: type: LL8ZZX1F
Nr.
.
.
ISMGROUPE2 CLASSE B
.
MadeinFrance
7400W
..
DPI7888X
.
1.2.1
1.2
•1
1.3
16A / 20A 16A
1.3.1 1.3.2

•1
A B
C
D
E
F
G
HI
J
K
LM

•1
1.4

•1
1.4.1 1.4.2
1.4.3
1.4.4
1.4.5

•1
1.4.6 1.4.7
1.4.9
1.4.8

•2
k
a
bc
e
gh
f
i
m
d
a
b
c
e
d

•2
2.6.2
2.3
2.3.1
2.3.2
2.4 2.4.1
2.4.2
2.5
2.5.1
2.6
2.6.1
2.6.3
2.6.4

2.7
2.8
2.7.1
2.8.1
2.9
2.10
2.10.1
2.10.2 2.10.3
•2
2.11
2.11.1 2.11.3
2.11.2

1
DEAR CUSTOMER,
EN
Discovering a De Dietrich product means experiencing a range of unique
emotions.
The attraction is immediate, from the moment you set eyes on the product.
The sheer quality of the design shines through, thanks to the timeless style
and outstanding nishes which make each component an elegant and
rened masterpiece in its own right, each one in perfect harmony with the
others. Next, comes the irresistible urge to touch it.
De Dietrich design makes extensive use of robust and prestigious
materials; authenticity is our watchword. By combining state-of-the-art
technology with top quality materials, De Dietrich produces beautifully
crafted products to help you get the most from the culinary arts, a passion
shared by all lovers of cooking and ne food. We hope that you enjoy using
this new appliance.
Thank you for choosing a De Dietrich product.

2
CONTENTS
Important safety advice and precautions.........................................3
Installing the induction hob...............................................................7
Unpacking ............................................................................................7
Fitting....................................................................................................7
Connection ...........................................................................................7
Installing the hood..............................................................................8
Fitting operations..................................................................................8
Recycling operation .............................................................................8
Extraction operation..............................................................................8
Final operations....................................................................................9
Wiring ...................................................................................................9
Using the hob....................................................................................10
Control panel glossary........................................................................10
Choice of cookware............................................................................ 11
Cooking ring selection ........................................................................ 11
Powering On/O󰀨................................................................................. 11
Power setting...................................................................................... 11
Horizone .............................................................................................12
Setting the timer .................................................................................12
Elapsed time key ................................................................................13
Locking the controls............................................................................13
Clean lock function .............................................................................13
Recall function....................................................................................14
Boil function........................................................................................14
Safety and recommendations.............................................................15
Using the hood .................................................................................16
Care....................................................................................................17
Problems ...........................................................................................18
Environment......................................................................................19
Customer service ............................................................................20
EN

3
IMPORTANT SAFETY ADVICE AND PRECAUTIONS
This user guide is also available on the brand's web site.
Please read these instructions before installing and using your appliance. These
instructions are intended to protect your safety and the safety of others. Keep this
user guide with your appliance. If the appliance is ever sold or given to another
person, ensure that the new owner receives the accompanying guide.
• With a view to constantly improving our products, we reserve the right to make
changes to their technical, functional or aesthetic characteristics in line with
technological progress.
• To easily locate the make, model number, etc. of your appliance, we recommend
that you note this information on the “After-Sales Service Department and Customer
Support” page.
Your appliance complies
with applicable European
Directives and regulations.
This appliance may be
used by children aged
8 years and older, and
by persons with impaired
physical, sensory or mental
capacities, or without
experience or knowledge, if
they are supervised or have
received prior instructions
on how to use the appliance
safely and have understood
the risks involved. Children
must not be allowed to play
with the appliance. The
appliance should not be
cleaned or maintained by
unsupervised children.
It must be possible to
disconnect the appliance
from the power supply;
t a switch on the xed
wiring system in accordance
with installation rules. The
green-yellow earth wire
must be connected to the
installation's earth terminal.
Ifthepowercableisdamaged,
it should be replaced by the
manufacturer, its after-sales
service department or by a
similarly qualied person in
order to avoid danger.
WARNING: If the surface
is cracked, unplug the
appliance from the power
supply to avoid any risk of
electrical shock.
WARNING: The cooking
process must be supervised.
A short cooking process must
be continuously supervised.
Do not use a steam cleaner.

4
It is not recommended to
place metal objects such as
knives, forks, spoons and
lids on the cooking surface
as they may heat up.
After use, turn the control
knob to switch o the hob
and do not rely on the pan
sensor.
The appliance is not
designed to be switched
on using an external timer
or separate remote control
system.
This applicants is designed to
be tted only on a worktop.
WARNING: Cooking with oil
or fat left unattended on a
hotplate can be dangerous
and can cause a re. Never
attempt to extinguish a re
with water, but switch o the
appliance and then smother
the ame with a cover or
re-retardant blanket.
WARNING: Fire risk: Do not
store items on the cooking
surface areas.
We do not recommend
using any hob protection
mechanisms. The use of
unsuitable protectors could
cause accidents.
The appliance and its
accessible parts become hot
during use.
Children under 8 should
not be allowed near the
appliance unless they are
constantly supervised.
•
Electrical risks:
• If the power cable is damaged,
it should be replaced by the
manufacturer, its after-sales
service department or by a
similarly qualied person in
order to avoid danger.
• The appliance can be
disconnected by using an
accessible power outlet or
by incorporating a switch in
the xed lines, in accordance
with the installation rules.
IMPORTANT SAFETY ADVICE AND PRECAUTIONS

5
• Do not change or attempt
to change the characteristics
of this appliance. Doing so
could be dangerous.
• The appliance must only
be repaired by an approved
specialist.
• Always disconnect the hood
before carrying out cleaning
or maintenance.
• Never use steam or high-
pressure equipment to
clean your appliance
(due to electrical safety
considerations).
•
Risk of asphyxiation:
•Regulations on the evacuation
of air must be complied with.
Air must not be sent into a
duct used to evacuate fumes
from appliances that use gas
or other fuels (this does not
apply to appliances that only
emit air into the room).
• The room must be suitably
ventilated when the cooker
hood is used at the same
time as appliances that use
gas or other fuels (this does
not apply to appliances that
only emit air into the room).
•
Risk of re:
• There is a risk of re if the
appliance is not cleaned and
the lters are not replaced
as often as stated in the
instructions. Accumulated
deposits of grease could
cause a re.
IMPORTANT SAFETY ADVICE AND PRECAUTIONS

IMPORTANT SAFETY ADVICE AND PRECAUTIONS
Keep these instructions near the
appliance. If you sell this appliance or
pass it on to anyone else, be sure to
include this guide. Please heed these
recommendations before installing and
using the appliance; they are intended
to protect your safety and that of others.
When taking delivery of the product,
check the packaging and its general
appearance. Write any objection on the
delivery document, and keep a copy of
it. Your appliance is intended for normal
household use. It must not be used
for commercial or industrial purposes
and must only be used for its intended
purpose.
No guarantee will be granted for any
damage or other problems resulting from
incorrect tting or use of the appliance.
With a view to constantly improving our
products, we reserve the right to make
changes to their technical, functional and
aesthetic characteristics. The appliance
is already designed to operate either in
recycling or in extraction mode. Before
tting the appliance, all its parts must
be veried. If any parts are damaged or
missing, contact the dealer and do not
attempt to t it.
6

7
•1INSTALLING THE HOB
1.1 UNPACKING
Remove all the protective packing pieces.
Check the appliance's characteristics on
the nameplate and be sure to comply
with them (1.1).
Note the service and standard references
shown on this plate in the boxes below
for future reference.
1. 2 FITTING THE HOB INTO THE
BASE UNIT
Check that the air intakes and outlets
are free of obstruction. Comply with the
information concerning the dimensions
(in millimetres) of the base unit in which
the hob will be tted.
Bear in mind that your hob requires
special tting arrangements, because it
is not a traditional hob; room must be
made for the extraction system's motor.
Therefore it requires a made-to-measure
unit underneath it. Generally we t a unit
with two ordinary and one pan drawer
under the hob. In this instance, be aware
that the upper drawer will be blocked up.
Furthermore, the depth of the unit must
be reduced. By the same token, there is
never enough room for an oven under
this type of appliance. But your kitchen
specialist will explain this to you in detail,
depending on the model you choose and
the units o󰀨ered in his catalogue.
- Fitting into the worktop
See diagram (1.2.1)
- Fitting ush with the worktop See
diagram (1.2.2)
Apply the seal all around the glass edge
of the hob (1.2.3)
1. 3 ELECTRICAL CONNECTIONS
(1.3.1)
These hobs must be connected
to the mains via an all-pole cut-
o󰀨 device that complies with
current installation regulations.
A disconnection device must be
incorporated into the xed wiring.
Identify the type of your hob's cable
according to the number of wires and
colours (1.3.1).
When power is rst supplied to your hob,
or after a prolonged power cut, a light
code will appear on the control panel.
Wait approximately 30 seconds or press
any touchkey on the control panel to
make the information disappear and use
your hob (this display is normal and is
reserved for use by After-Sales Service,
where applicable). In all cases, it should
be disregarded.
Service : .........................................................................
Type : ..............................................................................

8
•1FITTING THE HOOD
Before starting the installation, make
sure the appliance is disconnected from
the power supply.
1.4 FITTING OPERATIONS
Place the hob upside down on an
appropriate surface to avoid scratching
the glass. Take the hood out of its
packaging and t it as shown (1.4.1).
The metal hooks of the exhaust hood
must be inserted into specic slot, as
shown (1.4.2).
After attaching the hood (A) to the hob,
x it with the supplied metric screw (M),
use as shown (1.4.3).
Now t the adapter (D) and elbow tting
(E) (1.4.5 - 1.4.6).
The controls under the hob's glass top
have a cable that must be connected to
the control box (1.4.9).
Fit the hob in with the built-in hood.
FOR RECYCLING MODE (1.4.4)
The product's air outlet must be
connected to the unit's opening so that
the outgoing air can be recycled in the
kitchen. Charcoal lters (I) are needed
in this conguration. They must be tted
as shown (1.4.7).
The charcoal lters (I) are located
just under the grease lters (J), so t
them before tting the grease lters. A
pipework kit (B) with grille (G) (at the end
to be tted into the unit) is supplied with
the product.
IDENTIFICATION
A - Motor
B - Pipework
C - Metal grille
D - Adapter
E - Elbow ttings
F - User guide
G - Air vent
H - Adhesive
I - Charcoal lters
J - Grease lter
K - Adhesive clips
L - Check valve
M - Motor xing screw

•1FITTING THE HOOD
9
Tip
Use a hacksaw to cut the pipes.
FOR EXTRACTION MODE (1.4.5)
The product's air outlet must be
connected to the outside of the house.
The duct to be tted between the
product's air outlet and the outside of the
house is not supplied with the appliance.
It is imperative to t the supplied check
valve (L).
Tip
If a duct is tted, limit the number of
elbow sections, as each bend reduces
the e󰀩ciency of the ductwork by one
running metre. Avoid any sudden change
in direction in the ductwork.
The duct connected to the fan's air outlet
must have a constant section of 220x90
mm; it must be made in a material
approved by current regulations. Non-
observance of the aforementioned
instructions may result in performance or
noise problems, for which no guarantee
will be provided.
We advise you to glue the ducts and
elbow sections together (except for the
adapter (D) at the hood's outlet), or use
the supplied adhesive (H) to facilitate
any after-sales work.
The product is tted with 220 x 90 mm
ducts.
FINAL OPERATIONS
Fit the grease lters (J) in their housing,
passing them through the hob's central
opening (1.4.7).
To close the hob's central opening,
place the metal grille (C) on it as shown
(1.4.8).
WIRING (1.3.2)
The product's connection to the power
supply must be compliant with current
international and local regulations.
The various parts of this appliance
can be interconnected by a qualied
technician in accordance with wiring
rules.
It must be connected to the power
supply with a plug and this can also be
done by the end user.
Adhesive clips (K) are supplied with the
products for arranging and organizing
the cables along the sides of the unit.
We cannot accept any liability in
the event of an accident caused by
incorrect layout of the earthing cable or
connection.

k
a
bc
e
gh
f
i
m
d
•2USING THE HOB
Control panel glossary
a
= Switch on and o󰀨
b
= Locking/Clean Lock
c
= Choice of cooking ring
d
= Horizone
e
= Display
f
= Pre-selection
g
= Power/time setting
h
= Timer
i= Elapsed time function
k= Recall function
m
= Boil function
10