DeDietrich DPI7572 Series User manual

FR GUIDE D’UTILISATION
EN USER GUIDE
ES GUÍA DE UTILIZACIÓN
PT GUIA DE UTILIZAÇÃO
PL INSTRUKCJA OBSŁUGI
DA BRUGSANVISNING
RU РУКОВОДСТВО ПО ЭКСПЛУАТАЦИИ
FI KÄYTTÖOHJE
NO BRUKSANVISNING
SV BRUKSANVISNING
TABLE INDUCTION
INDUCTION HOB
PLACA DE INDUCCIÓN
PLACA DE INDUÇÃO
PŁYTA INDUKCYJNA
INDUKTIONSPLADE
ИНДУКЦИОННАЯ ПЛИТА
INDUKTIOTASO
INDUKSJONSTOPP
INDUKTIONSHÄLL

DEAR CUSTOMER
EN
Discovering De Dietrich products means experiencing unique emotions.
The attraction is immediate from the moment you set eyes on the product.
The sheer quality
of the design shines through, thanks to the timeless style and outstanding
finishes which make each component an elegant and refined masterpiece
in its own right, each one in perfect harmony with the others.
Next, comes the irresistible urge to touch it.
De Dietrich’s design makes extensive use of robust
and prestigious materials. By combining state-of-the-art technology with top
quality materials,
De Dietrich
produces beautifully crafted products to help you get the most from the
culinary arts, a passion shared by all lovers of cooking and fine food.
We hope that you enjoy using this new appliance.
Thank you for choosing a De Dietrich product.

CONTENTS
Safety and important precautions ....................................................3
Installation ..........................................................................................6
Unpacking ............................................................................................6
Building in ............................................................................................6
Connection............................................................................................6
Use ......................................................................................................7
Control panel glossary..........................................................................7
Power management..............................................................................8
Choice of cookware ..............................................................................8
Cooking zone selection ........................................................................8
Switching on and off ............................................................................9
Power setting........................................................................................9
Horizone / Duozone............................................................................10
Setting the timer..................................................................................10
Elapsed time key ................................................................................10
Locking the controls............................................................................11
Clean lock function ............................................................................11
ICS function ........................................................................................11
Recall function ..................................................................................11
Switch function ..................................................................................12
Boil function ......................................................................................12
Horizone Play ....................................................................................12
Grill / Griddle function ........................................................................12
Safety devices and recommendations................................................13
Care....................................................................................................15
Problems ..........................................................................................16
Environment......................................................................................17
Customer service..............................................................................18
EN

3
These instructions are also available on the brand’s web site.
Please read this advice carefully before installing and using your appliance. These
instructions are intended to protect your safety and the safety of others. Keep this
manual with the appliance. If you sell or give the appliance to someone else, make
sure that you also give them this manual.
• With a view to constantly improving our products, we reserve the right to make
changes to their technical, functional or aesthetic characteristics in line with
technological progress.
In order to easily locate the make, model number, etc. of your appliance, we
recommend that you note this information on the “After-Sales Service Department
and Customer Support” page.
IMPORTANT SAFETY ADVICE AND PRECAUTIONS
This appliance can be used by
children over 8 years old and
persons with reduced
physical, sensory or mental
capabilities or without
experience and knowledge if
they have been correctly
informed or trained in the use
of the appliance in a safe way
and understand the hazards
involved.
Children must not be allowed
to play with the appliance.
Cleaning and maintenance
must not be carried out by
children without supervision.
Children under 8 years old
must be kept away from the
hob unless they are
supervised at all times.
The appliance and its
accessible parts become hot
during use.
Precautions must be taken to
avoid touching the heating
elements.
Metal objects such as knives,
forks, spoons and lids must
not be placed on the cooking
surface as they may become
hot.
Your hob is equipped with a
child safety device that locks
its operation after use or
during cooking (See « Child
Safety use» section).
Your appliance complies with
applicable European
Directives and regulations.
In order to avoid interference
between your cooking hob
and a heart pacemaker, the
pacemaker must be designed
and programmed in
compliance with the
regulations that apply to it. Ask

4
IMPORTANT SAFETY ADVICE AND PRECAUTIONS
the pacemaker manufacturer
or your GP.
Leaving oil or fat to cook
unattended on a hob can be
dangerous and lead to fire.
NEVER attempt to extinguish
a fire with water. Instead,
switch off the appliance, then
cover the flame with a lid or
fire blanket.
CAUTION: cooking must be
monitored. Short cooking
requires constant surveillance.
Danger of fire: do not store
objects in the cooking zones.
If the surface is cracked, turn
off the appliance to avoid the
risk of electric shock.
Do not use your hob until you
have replaced the glass top.
Avoid hard shocks from
cookware: although the
vitroceramic glass worktop is
very sturdy, it is not
unbreakable.
Do not place hot lids flat on
your cooking hob. A suction
effect may damage the
vitroceramic surface. Avoid
dragging cookware across the
surface, which could damage
the decorative finish on the
vitroceramic top in the long
term.
Never use aluminium foil for
cooking. Never place items
wrapped in aluminium foil or
packaged in aluminium dishes
on your cooking hob. The
aluminium will melt and
permanently damage your
appliance.
Do not store cleaning products
or inflammable products in the
cabinet underneath the hob.
If the power cable is damaged,
it should be replaced by the
manufacturer, its after-sales
service department or a
similarly qualified person, so
as to avoid danger.
Ensure that the power cables
of any electrical appliances
plugged in close to the hob are
not in contact with the cooking
zones.
Never use a steam cleaner to
clean your cooking hob.
The appliance is not designed
to be switched on using an

5
IMPORTANT SAFETY ADVICE AND PRECAUTIONS
external timer or separate
remote control system.
After use, turn off the hob
using its control device and do
not rely on the pan detector.
WARNING: Only use hob
protectors designed by the
manufacturer of the cooking
appliance or listed as suitable
in the user guide, or included
with the appliance. The use of
unsuitable protectors could
cause accidents.

6
•1INSTALLATION
1.1 UNPACKING
Remove all the protective packing
pieces. Check and respect the
appliance’s characteristics that appear
on the nameplate (1.1.1).
Note the service and standard
references shown on this plate in the
boxes below for future reference.
1. 2 BUILDING INTO A BASE UNIT
Check that the air intakes and outlets are
free of obstruction (1.2.1). Comply with
the information concerning the fitting
dimensions (in millimetres) of the base
unit destined to receive the hob.
- Fitting into the worktop
See diagram (1.2.2 / 1.2.4)
- Fitting flush with the worktop
See diagram (1.2.3 / 1.2.5)
Except for models
Check that air circulates correctly
between the front and the back of your
hob.
If you are installing the hob above a
drawer (1.2.6) or above a built-in oven
(1.2.7), comply with the dimensions
provided on the illustrations to ensure a
sufficient air outlet at the front. Apply the
seal all around the edge of the hob
(1.2.8), before fitting.
Fit the hob into the base unit (1.2.9).
If your hob is located above your
oven, the hob’s thermal safety
devices can impede the simultaneous
use of the hob and the oven’s pyrolysis
programme. Your hob is equipped with
Horizone
Play
gik
an overheating prevention safety
system. This safety device can trigger,
for example, when the hob is installed
over an oven that is not sufficiently
insulated. The code «F7» then appears
in the control zone. In such
circumstances we recommend that you
increase the hob’s ventilation by creating
an opening in the side of the cabinet (8 x
5 cm).
1. 3 ELECTRICAL CONNECTIONS
These hobs must be connected
to the mains via an all-pole cut-
off device that complies with
current installation regulations. A
disconnection device must be
incorporated into the fixed wiring.
Identify the type of cable of your hob
according to the number of wires and
colours:
- 5-wire cable (1.3.1 et 1.3.2) :
a) green/yellow, b) blue, c) brown, d)
black, e) grey.
When power is first supplied to your hob,
or after an extended power outage, an
indicator light will appear on the control
panel. Wait approximately 30 seconds or
press any key on the control panel to
make the information disappear and use
your hob (this display is normal and is
reserved for use by After-Sales Service,
where applicable). In all cases, it should
be disregarded.
Service: Type:

k
a
bc
d
e
g
h
f
i
jlmo
n
d
•2USE
Control panel glossary
= Switch on and off
= Locking / Clean Lock
= Choice of cooking zone
= DuoZone or Horizone
= Display
= Pre-selection
= Power / time setting
= Timer
= Elapsed time function
= ICS function
= Recall function
= Switch function
= Boil function
= Grill function
= Choice of numeric panel
power / time
a
b
c
d
e
f
g
h
i
j
k
l
m
n
o
7

8
•2USE
2.1 POWER MANAGEMENT
Model only
The total power consumed by your hob
must be consistent with the power of
your electrical installation.
By default, the hob’s power is set to its
highest level.
To increase or reduce the power level:
- When applying power for the first time
(within 30 seconds) press any key and
the maximum power level will be
displayed (2.1.1).
To reduce the power, press the – key
(2.1.2) until the desired power setting is
reached.
To confirm, give a short press on the
and buttons together (2.1.3).
- At any other time, if your hob is in
standby (with or without residual heat),
press and hold the and
buttons together to change the power.
Available power levels:
Ensure that the power selected is
compatible with the hob's fuses.
Depending on the power level selected,
the division of power between the
cooking zones will be affected.
hob power in
kW
Fuses / Circuit
breaker (A)
7,4 32
4,6 20
3,6 13
3 13
Power Management
Power Management
2.2 CHOICE OF COOKWARE
Most cookware is compatible with
induction. Only glass, terracotta,
aluminium without a special base,
copper and some non-magnetic
stainless steels do not work with
induction cooking.
We suggest that you choose
cookware with a thick, flat
bottom. The heat will be distributed
better and cooking will be more uniform.
Never leave an empty pan to heat
unattended.
Avoid putting cookware on the
control panel.
2.3 COOKING ZONE SELECTION
There are several cooking zones
available. Select one which is suitable,
based on the size of the pan. If the base
of the cookware is too small, the power
indicator will start to flash and the
cooking zone will not work, even if the
cookware’s material is recommended for
induction. Take care not to use pans
which are smaller in diameter than the
cooking zone (see table)
Diameter of
bottom of
cookware
10 to 18 cm
11 to 22 cm
12 to 24 cm
15 to 32 cm
18 cm, oval
fish kettles
11 to 22 cm
Max. power of
cooking zone
(Watts)
2400
2800
3700
3700
3700
3700
2800
Diameter of
cooking zone
16 cm
18 cm
23 cm
28 cm
Horizone
Duozone
1/2 zone

•2USE
9
2.5 SETTING THE POWER
Press the +or – key (2.5.1) or use
numeric keypad to adjust your
power level between 1 and 19 or 1 and
14 (model ). In this case you can
enter the number corresponding the
desired power setting directly (2.5.2).
Pressing the «0» key switches the hob
off.
When switching on, you can go directly
to maximum power (apart from boost)
by pressing the "–" key for the zone.e .
Power presets
There are four keys available that
provide direct access to pre-set power
levels:
= power 2 - Keep warm
= power 10 - Simmer
= power 19 - Sear
BOOST = maximum power (2.5.3)
These power values can be modified,
except for BOOST.
Proceed as follows:
The hob must be switched off.
- Press and hold or or
to select it.
- Set the new power setting by pressing
on the +or -button.
- A beep will confirm your action after a
few moments.
Note: Power levels must be between
1 and 3 for
4 and 11 for
12 and 19 for
For model the pre-set power level
are as follows:
= power 2 - Keep warm
= power 8 - Simmer
= power 14 - Sear
o
Power Management
f
g
Model only
Available power levels:
When several cooking zones are
used at the same time, the hob manages
the power distribution, so as not to
exceed its total power.
When you use maximum power (Boost)
on several cooking zones at the same
time, position pans to achieve the best
positioning and avoid arrangements
(2.3.1 - 2.3.2 - 2.3.3 - 2.3.4 - 2.3.5.)
2.4 SWITCHING ON/OFF
Press the On/Off key . "0" flashes
in each zone for 8 seconds (2.4.1). If
no pan is detected, select a zoner
(2.4.2). If a pan is detected, the «0»
flashes with a dot. You can then set the
power level. The cooking area heats up
automatically.
Switching off a zone on the hob
Press and hold the key for zone , a
long beep sounds and the display goes
off or an "H" appears (residual heat).
Press the On/Off key to switch the hob
off completely.
Power Management
Hob power
in kW
Cooking
zone
16 cm
Cooking
zone
18 cm
Cooking
zone
23 cm
7,4 2000 W 2800 W 3100 W
4,6 2000 W 2550 W 2800 W
3,6 2000 W 2400 W 2600 W
3 2000 W 2100 W 2200 W
a
c

10
•2USE
2.6 HORIZONE / DUOZONE
/
The free zone is selected with touchkey
(2.6.1). The power and timer are
adjusted as for a normal cooking zone.
To switch the zone off, press and hold
key , a long beep sounds and the
displays go off or the "H" symbol
appears.
Pressing the touchkey in front of or
behind the zone deactivates the
function and transfers the settings to
the selected zone.
2.7 SETTING THE TIMER
Each cooking zone has a dedicated
timer. It can be used as soon as the
cooking zone is turned on.
To switch it on or change it, press the
timer touchkey (2.7.1), and then
the +or -(2.7.2) or use the
numeric keypad (2.7.3).
In this case you can enter the figures
for the desired time directly, one after
the other.
Pressing the «0» key switches off the
timer.
To make setting a very long time easier,
you can go straight to 99 minutes by
pressing the – touchkey.
At the end of cooking, the display
indicates 0 and a warning beep
sounds. To cancel this information,
press any button for the particular
cooking zone being used. Otherwise,
they will switch off after a few seconds.
To stop the timer during cooking, press
the +and - keys at the same time or
return to 0 using the -key or enter "0"
on the numeric keypad.
h
g
o
Horizone
tech
Duozone
d
d
Independent timer
This function allows you to time an event,
without cooking.
- Select a cooking zone you are not using
(2.7.4).
- Press the .
- Set the time with touchpad . A “t”
flashes in the display (2.7.5).
- At the end of your adjustment “t” be-
comes becomes fixed and the count be-
gins.
Note:
You can stop a count in progress by
keeping your finger on the touchpad of
the selection on the display.
2.8 ELAPSED TIME key
This function displays the time since
the power setting was last changed for
a selected cooking zone.To use this
function, press the . The elapsed
time flashes in the selected zone's
timer display (2.8.1).
If you want cooking to end within a
specific time, press the key and
then, within 5 seconds, press +on the
timer to increase the desired cooking
time. The elapsed time is displayed
fixed for 3 seconds and then the
remaining time is displayed. A beep
sounds to confirm your choice.
This function is available with or
without the timer function.
Note: if the timer is showing a time, it is
not possible to change it within 5
seconds of pressing . After 5
seconds, the cooking time can be
changed.
i
i
i
h
g

•2USE
11
2.9 LOCKING THE CONTROLS
Child safety lock
Your hob has a child safety device
which locks the controls when the hob
is not in use or during cooking (to
maintain the current settings). For
safety reasons, only the stop key and
the zone selection keys are still active
and allow the hob or a cooking zone to
be switched off.
Locking
Press key (cadenas), until the "bloc"
locking symbol appears in one of the
displays and a beep confirms the
operation (2.9.1).
Table locked in operation
The display of cooking zones in
operation alternately indicates power
and the locking symbol .
When you press the power or timer keys
for the zones which are «on»:
«bloc» appears for 2 seconds and then
switches off.
Unlocking
Press key until the "bloc" locking
symbol disappears from the display and
a beep confirms the operation.
CLEAN LOCK function
This function locks the hob off while it is
being cleaned.
To activate Clean lock:
Give a short press on key (padlock).
A beep sounds and the «bloc» symbol
flashes in the display.
After a predefined time, the lock will
automatically disengage. Two beeps
sound and «bloc» switches off. You can
stop the Clean Lock at any moment by
b
b
b
pressing and holding touchkey .
2.10 ICS FUNCTION
Intelligent Cooking System
This function optimises the choice of
cooking zone for the diameter of
cookware used.
Proceed as follows:
Place the pan on the cooking zone, e.g.
28 cm dia.).
Select Boost power and possibly a
cooking time.
Press key . «ICS» symbol appears in
the display (2.10.1)
- either the zone chosen is the best one
for the pan and «ICS» disappears
leaving the initial cooking parameters in
the display.
- or the zone chosen is not the best one
for the pan and the display then
indicates which zone should be used
and the settings are transferred to it
automatically (2.10.2).
N.B.: The hob must be cold to use this
function.
2.11 RECALL FUNCTION
This function lets you display the last
«power and timer» settings for all the
burners which were switched off less
than 3 minutes previously.
To use this function, the hob must be
unlocked. Press the On/Off key and then
give a short press on key (2.11) .
When the hob is operating, the function
lets you see the power and timer settings
for the burner(s) which have been
switched off for less than 30 seconds.
k
j
b

12
•2USE
Do not use a cast iron pan with this
function.
You can also use this function to cook
any food that needs to be cooked in
boiling water.
Advice on how to save energy
Cooking with the correctly sized lid
saves energy. If you use a glass lid, you
can control your cooking perfectly.
2.14 HORIZONE PLAY
models
Your appliance is equipped with a guide
at the rear of the cooking surface which
allows De Dietrich accessories in the
Horizone Play range, such as the
chopping block, griddle or grill to be
positioned.
Positioning accessories:
Position the groove (A) on your
accessory on the guide (B) on your
appliance (2.14.1).
Do not slip Horizone Play
accessories on to the cooking surface or
you could scratch it.
2.15 GRILL / GRIDDLE FUNCTION
This function allows you to use grill or
griddle type accessories in the
"Horizone" free zone, so that food can
be grilled.
The "Horizone" must be selected;
then give a short press on the Grill key
and "GRILL" appears in the upper
display area (2.15.1). When the
temperature required for the grill is
reached, a beep sounds for 10 seconds
and "GRILL" scrolls through the display
(2.15.2).
d
n
Horizone
Play
gik
2.12SWITCH FUNCTION
This function allows a pan to be moved
from one zone to another while retaining
the original settings (power and time).
Give a short press on the key; ====
symbols scroll through the display. Select
the zone to which you wish to move the
pan. The settings will be transferred to
the selected zone and you can now move
the pan.
2.13 FONCTION BOIL
With this function you can boil and
simmer water to cook pasta, for
example.
Select a zone and give a short press on
the "Boil" key (2.13.1) .
The default quantity of water displayed is
2 litres, but you can change it using the
+or -(2.13.2).
Set the quantity of water required (from
0.5 to 6 litres).
Confirm by pressing the «Boil» symbol or
wait a few seconds for automatic confir-
mation.
Cooking starts.
A beep sounds when the water is boiling
and the "Boil" symbol scrolls through the
display (2.13.3).
You can then add the pasta and confirm
by pressing the «Boil» key.
By default, the display shows the power
and a cooking time of 8 minutes.
You can still adjust the power and the
cooking time suggested.
A beep sounds out when cooking is
finished.
NOTE: It is important that water is at
ambient temperature at the start of
cooking or the final result will be
distorted.
m
g
l

•2USE
13
The timer cannot be used with the Grill
and Griddle functions.
The Elapsed time function can only be
used in consultation mode.
Pressing keys , , exits the
function.
In there is no pan in place, "Grill" flashes
(like a power setting but you remain
within the function).
2.16SAFETY PRECAUTIONS AND
RECOMMENDATIONS
Residual heat
After intensive use, the cooking area you
have just used will remain hot for several
minutes.
An "H" is displayed during this time
(2.16.1). So, avoid touching the zones
concerned.
Temperature limiter
Each cooking area is fitted with a safety
sensor that continuously monitors the
temperature of the bottom of the pan. In
the event that an empty pan is left on a
zone that is switched on, the sensor
automatically adapts the power
delivered by the hob and limits the risk of
damaging the cookware or the hob.
Spillage protection
The hob may be switched off in the
following three cases:
- A spillage in the touchkey area (2.16.2).
- Damp cloth placed over the touchkeys.
- A metal object placed on the touchkeys
(2.16.3) .
Remove the object or clean and dry the
touchkeys and then continue cooking.
In these cases, the symbol is
displayed accompanied by an audible
fg
o
signal.
«Auto-Stop» system
If you forget to switch off a pan, your
hotplate has an “Auto-Stop” safety
function that automatically switches off
the forgotten cooking zone after a preset
time (between 1 and 10 hours based on
the power level setting).
If the safety system is triggered, the
cooking zone is shown as cut off with
"AS" displayed on the control panel and
a beep sounds for about 2 minutes. To
stop it, simply press any of the control
buttons.
Sounds similar to the ticking of a
clock may be heard.
These sounds occur when the hob is in
operation and disappear or decrease
according to the heating configuration.
Low whistling or humming may also
occur depending on the model and on
the quality of your pan. These noises are
a normal part of induction technology
and do not indicate a fault.
We do not recommend using any
hob protection mechanisms.

•3CARE
For light soiling, use a kitchen sponge.
Use hot water to wet the area to be
cleaned and then wipe dry.
For burnt on food deposits, sugary
spills, melted plastic, use a scouring
sponge and/or a special glass cleaning
scraper. Use hot water to wet the area to
be cleaned, use a special glass cleaning
scraper to remove the dirt, finish off with
a scouring sponge and then wipe dry.
For rings and limescale marks, apply
warm white vinegar to the dirt, leave to
work and then wipe dry using a soft
clean cloth.
To keep metal shining brightly and for
weekly cleaning, use a special glass
and ceramic hob cleaning product.
Apply the special product (which
contains silicone and has a naturally
protective effect) to the vitroceramic
hob.
Important note: Do not use power or
abrasive sponges. Use cleaning creams
and special gentle washing up sponges.
Care of the chopping block
Some precautions must be taken to
maintain your product’s quality and
effectiveness. Before you use your
chopping block for the first time, it should
be oiled with cooking oil (one or two
soup spoons rubbed over all surfaces
with a clean cloth). This will maintain its
appearance and ensure that it gives long
service.
Care: Oil the block once a month. If the
chopping board is only used for
decoration, you are strongly advise to
varnish it to prevent it from expanding or
contracting.
NEVER wet the chopping board when
cleaning it; scrape it with a knife blade or
scraper to remove any excess
dampness from cutting meat and keep
the wood in perfect condition.
What you must never do to your
chopping board:
- place it in contact with pans or very hot
dishes.
- keep it too close to pulsed air heating or
air conditioning, since these systems dry
the air.
- over-exposure to sunlight in front of a
window.
- excessive temperature differences.
- clamp it between two materials without
allowing for expansion, if building it in.
- fitting it on a surface which is not yet
dry during construction (plaster or
cement which is still damp....).
14

15
•4PROBLEMS
When using for the first time
You notice that something appears in
the display. This is normal. It will
disappear after 30 seconds.
The circuit breaker trips/blows a fuse
or only one side of the hob works. The
hob has been wired incorrectly. Check
the wiring (see connections section).
The hob gives off a smell during the
first few uses. The appliance is new. Heat
each zone for half an hour with a pan full
of water.
When switching on
The hob does not operate and the
lights on the panel remain off.
There is no power to the hob. The power
supply or connection is faulty. Inspect
the fuses and the circuit-breaker.
The hob does not operate and another
message is displayed. The electronic
circuit does not operate properly. Call the
After-Sales Service Department.
The hob does not work, the "bloc"
information is displayed. Unlock the
child safety lock.
Fault code F9: voltage is below 170 V.
Fault code F0: temperature is below
5°C.
During use:
The hob does not operate. The panel
displays and a beep can be heard.
There was a spillage or an object
obstructing the control panel. Clean or
remove the object and continue
cooking.
Code F7 is displayed.
The electronic circuits have overheated
(see ‘building in’ section).
During the operation of a cooking
area, the illuminated symbols of the
control panel are still flashing.
The pan being used is not suitable.
The cookware makes a noise and your
hob clicks during cooking (see section
on "Safety devices and
recommendations").
This is normal. With certain types of pan,
heat passing from the hob to the pan
causes this clicking.
The ventilation continues to operate
after the hob is switched off.
This is normal. It helps cool the electronics.
In the event of a persistent malfunction.
Switch off the hob for one minute. If the
problem persists, contact the After-Sales
Department.

16
•5ENVIRONMENT
CARE FOR THE ENVIRONMENT
This appliance’s packaging can be
recycled. Recycle is and so contribute to
protecting the environment, by placing it
in containers provided for the purpose by
local authorities.
Your appliance also contains lots of
recyclable material. This logo
indicates that used appliances
should not be mixed with other
waste.
The recycling of appliances
organised by your manufacturer is
carried out under the best conditions, in
accordance with European Directive
2002/96/EC on the disposal of waste
electronic and electrical equipment.
Contact your local authority or retailer for
information on used appliance collection
points close to your home.
Thank you for helping to protect the
environment.

17
•6CUSTOMER SERVICE
Any repairs made to your appliance must
be carried out by a qualified professional
authorised to work on the brand. When
making contact, mention the complete re-
ference of your appliance (model, type,
serial number). This information appears
on the manufacturer’s nameplate atta-
ched to your equipment (1.1.1).

CZ5703497_00 01/18