DeDietrich G30 Quick start guide

FR GUIDE D’INSTALLATION ET D’UTILISATION
EN GUIDE FOR INSTALLATION AND USE
Table de cuisson
Cooking Hob
99641823_A_ML.qxp 12/09/2007 10:14 Page 1

31
Dear Customer,
You have just acquired a DE DIETRICH cooking hob and we would
like to thank you.
Our research teams have created this new generation of appliances
for you. Their quality, appearance, functions and technological
advances make them exceptional products, showcases of our
unique know-how.
Your new DDEEDDIIEETTRRIICCHHhob will blend harmoniously into your
kitchen and perfectly combine cooking performance and ease of use.
We wanted to offer you a product of excellence.
In the line of DDEEDDIIEETTRRIICCHHproducts, you will also find a wide range
of ovens, microwaves, ventilation hoods, hoods, dishwashers, and
refrigerators, all of which can be integrated and all of which can be
coordinated with your new DDEEDDIIEETTRRIICCHHcooking hob.
Of course, in an ongoing effort to better satisfy your demands with
regard to our products, our after-sales service department is at your
disposal and ready to listen in order to respond to all of your
questions and suggestions (contact information at the end of this
booklet).
Log onto our website wwwwww..ddeeddiieettrriicchh--eelleeccttrroommeennaaggeerr..ccoommwhere
you will find our latest innovations as well as useful and
complementary information.
DE DIETRICH
Setting New Values
FR 02
EN 31
As part of our commitment to constantly improving our products, we reserve the right to
make changes to them based on advances to their technical, functional and/or
aesthetic properties.
IImmppoorrttaanntt::BBeeffoorreeiinnssttaalllliinnggaanndduussiinnggyyoouurraapppplliiaannccee,,pplleeaasseerreeaaddtthhiissIInnssttaallllaattiioonn
aannddUUssaaggeeGGuuiiddeeccaarreeffuullllyy,,aassiittwwiillllaalllloowwyyoouuttooqquuiicckkllyyffaammiilliiaarriisseeyyoouurrsseellffwwiitthhiittss
ooppeerraattiioonn..
99641823_A_ML.qxp 12/09/2007 10:16 Page 31

32
TABLE OF CONTENTS
••Safety Instructions _________________________________________ 33
••Caring for the environment __________________________________ 34
••Description of your appliance ________________________________ 35
••Description of your control panel _____________________________ 36
1 /INSTALLING YOUR APPLIANCE
••Choice of location__________________________________________ 37
••Fitting ____________________________________________________ 37
••Fitting tips ________________________________________________ 38
••Electric connection_________________________________________ 39
••Gas connection____________________________________________ 40
••Changing the gas supply ____________________________________ 42
2 / USING YOUR APPLIANCE
••Description of your hob top__________________________________ 48
••Cookware suitable for gas burners____________________________ 49
••Switching on the gas burners ________________________________ 50
••Description of the controls (2 burner model)____________________ 51
• Setting the timer (2 burner model) ____________________________ 52
••Description of the controls (1 high-power burner model)__________ 53
• Setting the timer (1 burner model) ________________________________________________________54
3 / MAINTAINING YOUR APPLIANCE
••Maintaining your appliance __________________________________ 55
4 / SPECIAL MESSAGES, INCIDENTS
••During use ________________________________________________ 56
5 / SMALL FAULTS AND PROBLEMS _______________________________ 57
6 / GUIDE TO GAS COOKING (2 burner model) _______________________ 58
6 / GUIDE TO GAS COOKING (1 high-power burner model) _____________ 58
7 / PERSONAL NOTES ___________________________________________ 59
8 / AFTER-SALES SERVICE DEPARTMENT AND CUSTOMER RELATIONS
••Repairs___________________________________________________ 60
99641823_A_ML.qxp 12/09/2007 10:16 Page 32

33
SAFETY GUIDELINES
SAFETY GUIDELINES
——We have designed this cooking hob for use
by private individuals in their homes.
——This appliance must be installed in
compliance with currently applicable
regulations and used only in a well-ventilated
location. Consult this guide before installing
and using your appliance.
——All cooking should take place under your
surveillance.
——These cooking hobs are intended
exclusively for cooking beverages and
foodstuffs and do not contain any asbestos-
based materials.
——This appliance is not connected to a
combustion by-product disposal system. It
must be installed and connected in
compliance with all applicable laws. Special
attention should be given to applicable
regulations concerning ventilation.
——Do not store cleaning PPRROODDUUCCTTSSor
FFLLAAMMMMAABBLLEEPPRROODDUUCCTTSS(aerosol cans or
pressurised containers, as well as papers,
cookbooks, etc.) in the cabinet underneath
your cooking hob.
— If you use a drawer located under the hob,
we recommend that you avoid using it to
store items that are heat sensitive (plastic,
papers, aerosol cans, etc.).
——Your hob should be disconnected from
power and fuel supplies (electricity and gas)
before any repairs.
——When you connect the power cables of any
electrical appliances plugged in close to the
hob, ensure that they are not in contact with
the cooking zones.
——As a safety measure, do not forget to close
the general supply tap for gas distributed by
pipe or the tap of the tank for butane or
propane gas after use.
—The CE mark is affixed to these hobs.
— Installation should only be performed by
installers and qualified technicians.
——Before installation, ensure that the local
distribution conditions (gas type and
pressure) and the appliance’s settings are
compatible.
——This hob is compliant with standard
EN 60335-2-6 relating to the heating of
cabinets and the Class 3 standard with regard
to installation (as per standard EN 30-1-1).
••
Warning
The required settings for the hob are
written on a sticker located in the plastic
bag, as well as on the packaging.
In order to easily locate the reference
information for your appliance, we
recommend that you note it on the “After-
Sales Service Department and Customer
Relations” page (this page also explains
where to find this information on your
appliance).
This appliance is not intended for use by
persons (including children) with impaired
physical, sensory or mental capacities, or by
inexperienced or untrained persons, except
if they have been instructed in its operation
by a person responsible for their safety.
Children should be watched to ensure that
they do not play with the appliance.
99641823_A_ML.qxp 12/09/2007 10:16 Page 33

34
CARING FOR THE ENVIRONMENT
••
— This appliance’s packing materials are
recyclable. Recycle them and play a role in
protecting the environment by depositing
them in local authority containers provided
for this purpose.
Your appliance also contains
various recyclable materials. It is
therefore marked with this logo to
indicate that, in European Union
countries, used appliances must
not be mixed with other waste.
Appliance recycling organised by
your manufacturer will thus be carried out in
optimum conditions, in accordance with
European directive 2002/96/CE relating to
electrical and electronic equipment waste.
Contact your local council or your retailer to
find out the drop-off points for used
appliances that are nearest to your home.
We thank you for your help in protecting the
environment.
CARING FOR THE ENVIRONMENT
99641823_A_ML.qxp 12/09/2007 10:16 Page 34

35
DESCRIPTION OF YOUR APPLIANCE
••
DESCRIPTION OF THE HOB
Tip
This Guide to Installation and Use is valid for several models. There may be minor
differences in details or fittings between your appliance and the descriptions provided.
Hob model: 2 gas burners
with touch-sensitive controls
Fig. 01
D
C
B
A
EF
Grill
to support
pan
Hob model: 1 high-power burner
with touch-sensitive controls
F
Grill
to support
pan
D
C
B
A
E
A
B
Burner cover
Burner head
Injector
C
DSpark igniter
Thermocouple
Control panel
E
F
99641823_A_ML.qxp 12/09/2007 10:16 Page 35

36
A
B
Burner on/off touch control
Burner reference
Timer adjustment
Lock display
Lock/unlock touch control of
control panel
Overall off button
Timer clock display
Burner temperature display
Burner power adjuster
Direct access touch control
C
D
E
F
G
H
I
J
DESCRIPTION OF YOUR APPLIANCE
••
DESCRIPTION OF YOUR CONTROL PANEL
Model: 2 burner DTG738*/*
Model: 1 burner DTG708*/*
A
BCBD
AE
II
F
A
B
C
BD
AE
II
GHH
H
HGF
J
J
99641823_A_ML.qxp 12/09/2007 10:16 Page 36

37
1 / INSTALLING YOUR APPLIANCE
••
CHOICE OF LOCATION
Your appliance shoud be flush mounted in the
surface of a support cabinet that is a minimum of 3
cm thick, made of a material that resists heat or that
is covered with such a material.
So as not to inhibit the movement of cooking
utensils, there should not be to any obstacle within
30 cm of the hob to the right or left or back.
If a horizontal divider wall is positioned under the
hob, it should be placed between 10 cm and 15 cm
away from the top of the work surface. Never store
aerosol cans or pressurised containers in any
compartment that may exist under the hob (see
chapter
“ Safety instructions ” ).
BEFORE INSTALLATION
Before installation of your appliance and to ensure
leaktightness between the drawer unit and the work
surface, make sure that you glue the seal provided
in the plastic bag (Fig. 02) .
——Remove the pan supports, the burner covers and
burner heads; noting their positions.
——Turn the hob over and carefully place it on top of
the opening in the cabinet so as not to damage the
knobs and spark plugs.
——Glue the foam seal, supplied with the appliance,
ttootthheeoouuttssiiddeeeeddggeeoofftthheeffrraammee. This seal ensures
leaktightness between the glass and the work
surface.
( Fig. 02: model with touch-sensitive controls).
——Place your hob in the opening of the support unit,
carefully centering it in the cut-out.
——Reposition the pan supports, burner covers and
burner heads.
——Connect the hob’s power cable to your kitchen’s
electricity supply (see section “EElleeccttrriicciittyy
ccoonnnneeccttiioonn”).
——Connect your appliance to the gas supply (see
section “GGaassccoonnnneeccttiioonn”).
••
49 cm
3 cm mini
30 cm mini 30 cm mini
34 cm
5,3 cm mini
70 cm mini
Fig. 01
Fig. 02
Seal
APPLIANCE
Standard
cabinet
cut-out
Standard
cabinet
cut-out
Tot al
dimensions
above
the work
surface
Tot al
dimensions
below
the work
surface
Width
34 cm
34 cm
38 cm
34 cm
Depth
49 cm
49 cm
52 cm
48 cm
Thickness
depending
on cabinet
depending
on cabinet
5 cm
5.1 cm
Model
38 cm
38 cm
38 cm
38 cm
Housing
99641823_A_ML.qxp 12/09/2007 10:16 Page 37

38
Min 4mm
Min 40 cm2
A
A
A
— If you wish, you can immobilise the hob
using the four mounting brackets delivered
with their screws, fixed to the four corners of
the casing. YYoouummuussttuusseetthheehhoolleesspprroovviiddeedd
ffoorrtthhiissppuurrppoossee,,aaccccoorrddiinnggttootthheeddiiaaggrraamm
aabboovvee
(Fig. 01)
..
—SSttooppssccrreewwiinnggwwhheenntthheemmoouunnttiinnggbbrraacckkeett
ssttaarrttssttoobbeeccoommeeddeeffoorrmmeedd..
DDoonnoottuusseeaassccrreewwddrriivveerr.
CASE OF FLUSH FITTING ABOVE
A DRAWER, OF A CABINET WITH
A DOOR OR DRAWER
•
AAbboovveeaanneemmppttyyccaabbiinneettoorraaddrraawweerr
(Fig. 02) .
Fitting your hob above an oven requires the
oven to be fitted low. It is recommended that
the hob not be installed above an oven if the
oven’s ventilation is not frontwards.
Create an air vent in the partition to the right
or left of the oven, of 40 cm2.
Fig. 01
Fig. 02
Underside view
of the housing
••
FITTING TIPS
Mounting holes
A
1 / INSTALLING YOUR APPLIANCE
••
Gas hob
Front of
cabinet
Services
space
Min
80 mm
Min 100
mm
Worktop
Fig. 03
Warning
The hob’s heat-safety features prevent it
being used while it is in pyrolysis mode.
99641823_A_ML.qxp 12/09/2007 10:16 Page 38

39
••
1 / INSTALLING YOUR APPLIANCE
••
ELECTRIC CONNECTION
Your hob is supplied with a power cable (type
H05VVF cross-section 1 mm2) with 3 conductors
(including 1 ground: green/yellow). These
conductors must be connected to the grid via a
standardised CEI 60083 live + ground + neutral
electrical outlet or or an all-pole cut-off device
with a minimum distance between contact
openings of 3.5 mm.
The plug of the electrical outlet must be
accessible after installation
.
Warning
If the power cable is damaged, it must
be replaced by a cable or a special kit
available from the manufacturer or its After-
Sales Service Department.
CCRROOSSSS--SSEECCTTIIOONNOOFFCCAABBLLEETTOOBBEEUUSSEEDD
H05V2V2F cable -
T90
Cross-section of
conductors in mm2
Fuse
222200--224400VV~~--5500HHzz
3 conductors
including
1 ground
1
10 A
99641823_A_ML.qxp 12/09/2007 10:16 Page 39

40
GAS CONNECTION
• Preliminary comments
If your hob is installed above an oven or if proximity to other heating elements poses a threat of
overheating the connection, you must insulate the cable in a rigid pipe.
If a hose or soft pipe (in the case of butane gas) is used, it should not come into contact with a
moving part of the cabinet, nor should it pass through a location that may become blocked.
••
;
;
@
@




;
;
Q
Q


Fig. A Fig. B
1 / INSTALLING YOUR APPLIANCE
The gas connection must be installed in
compliance with applicable regulations in the
country of installation.
• Gas distributed by pipe, natural
gas
For your safety, you must choose from the
three following connection options:
— Connection with a rigid pipe made from
copper and with screw-on mechanical
connectors (G1/2 gas standard mark). Make
the connection directly to the end of the
elbow fitted on the appliance.
— Connection with a wavy metal hose
(stainless steel) with screw-on mechanical
connectors (compliant with the NF D 36-121
standard) whose service life is unlimited
( Fig.
A).
— Connection with a reinforced rubber
hose
with screw-on
mechanical connectors
(compliant with the NF D 36-103 standard)
whose service life is 10 years
(Fig. B).
Warning
When connecting your hob’s gas
supply, if you have to change the direction
of the elbow fitted on the appliance:
¬¬Change the washer seal.
--Screw on the elbow’s nut, being careful not
to exceed a torque of 17 N.m.
Warning
All soft pipes and hoses whose service life is limited must have a maximum length of
two meters and must be accessible along their entire length. They must be replaced before
the end of their service life (marked on the pipe). Regardless of the means of connection
chosen, ensure that the connection is leaktight, after installation, with soapy water.
In France, you must use a hose or a pipe bearing the stamp NF Gaz
99641823_A_ML.qxp 12/09/2007 10:16 Page 40

41
1 / INSTALLING YOUR APPLIANCE
•Gas supplied by tank or
cylinder (butane/propane)
For your safety, you must choose from the
three following connection options:
— Connection with a rigid pipe made from
copper and with screw-on mechanical
connectors (G1/2 gas standard mark). Make
the connection directly to the end of the
elbow fitted on the appliance.
— Connection with a wavy metal hose
(stainless steel) with screw-on mechanical
connectors (compliant with the NF D 36-125
standard) whose service life is unlimited
(Fig.
01).
— Connection with a reinforced rubber
hose
with screw-on mechanical connectors
(compliant with the NF D 36-112 standard)
whose service life is 10 years
(Fig. 02).
A
B
Seal (not provided)
Adaptor (not provided)
Clamp (not provided)
C
In an existing system, a soft pipe fitted with
clamps (compliant with the XP D 36-110
standard) whose service life is five years may
be used. It is necessary in this case to use an
adaptor without forgetting to fit a sealing
washer between the adaptor and the hob’s
elbow
(Fig. 03).
Tip
You can obtain the adaptor and the sealing
washer from your After-Sales Service
Department.
Warning
Screw on the adaptor with a torque not
exceeding 25 N.m.
;
;
@
@




;
;
Q
Q


Fig. 01 Fig. 02 Fig. 03
A
B
C
99641823_A_ML.qxp 12/09/2007 10:16 Page 41

42
1/ INSTALLING YOUR APPLIANCE
CHANGING FROM NATURAL GAS
TO BUTANE/PROPANE
Warning:
Your appliance is sold pre-set for natural
gas. The injectors required for adaptation to
butane/propane can be found in the same plastic
pocket as this guide.
Each time you change the gas, BEFORE ANY
CONNECTION IS MADE, you must complete the
following steps in order:
— Flip the gas changing switch TO THE LEFT (Fig. 01).
— Adapt the gas connection
— Change the injectors
— Adjust the hob connections.
•
FFlliipptthheeggaasscchhaannggiinnggsswwiittcchh::your appliance is
supplied by butane/propane You must flip the gas
changing switch on the right front of your hob to the
butane position (Fig. 01), or to the left.
•
AAddaapptttthheeggaassccoonnnneeccttiioonn::refer to the ""GGaass
CCoonnnneeccttiioonn""section..
•
CChhaannggeetthheeiinnjjeeccttoorrss,,proceeding as follows:
— Remove the pan supports, heads and covers from
all burners.
— Using the wrench provided, unscrew the injectors
located under each crucible and remove them (Fig
02).
— Replace with the corresponding gas injectors, in
compliance with the positioning of the injectors and
the table of gas properties at the end of this section:
— First screw them in manually until the injector
locks into place.
— Apply the wrench to the injector as far as it will go.
— Draw a line on the burner plate using a pencil at
the place indicated (Fig 03).
— Turn the wrench clockwise until the line appears
on the other side (Fig. 04).
Warning
Exceeding this limit may damage the
product.
- Replace the burner heads, burner covers and pan
supports on the hob.
YYOOUURRHHOOBBIISSNNOOWWRREEAADDYYTTOOBBEEUUSSEEDDWWIITTHH
BBUUTTAANNEE//PPRROOPPAANNEE..
••
Tip:
Each time you change the gas supply,
tick the box corresponding to the new gas
level on the label found in the plastic
pocket. Refer to the corresponding "Gas
Connection" section.
Fig. 03
Fig. 04
Line
Line
Wrench
Wrench
Fig. 02
Wrench
Injector
Crucible
Fig. 01
Switch
Natural
gas
Butane/Propane
99641823_A_ML.qxp 12/09/2007 10:16 Page 42

43
CHANGING FROM BUTANE/PROPANE
TO NATURAL GAS
During this operation, BEFORE ANY CONNECTION IS
MADE, you must complete the following steps:
— Turn the gas changing switch TO THE RIGHT
(Fig. 01).
— Adapt the gas connection
— Change the injectors
—Adjust the hob connections
•
TTuurrnntthheeggaasscchhaannggiinnggsswwiittcchh::your appliance is
supplied by butane/propane You must flip the gas
changing switch on the right front of your hob to the
network gas (natural gas) position (Fig. 01), or to the
right.
•
AAddaapptttthheeggaassccoonnnneeccttiioonn::refer to the ""GGaass
CCoonnnneeccttiioonn""section..
•
CChhaannggeetthheeiinnjjeeccttoorrss,,proceeding as follows:
— Remove the pan supports, heads and covers from
all burners.
— Using the wrench provided, unscrew the injectors
located under each crucible and remove them (Fig
02).
— Replace with the corresponding gas injectors, in
compliance with the positioning of the injectors and
the table of gas properties at the end of this section:
— First screw them in manually until the injector
locks into place.
— Apply the wrench to the injector as far as it will go.
— Draw a line on the burner plate using a pencil at
the place indicated (Fig 03).
— Turn the wrench clockwise until the line appears
on the other side (Fig. 04).
Warning
Exceeding this limit may damage the
product.
-
Replace the burner heads, burner covers and pan
supports on the hob.
YYOOUURRHHOOBBIISSNNOOWWRREEAADDYYTTOOBBEEUUSSEEDDWWIITTHH
NNEETTWWOORRKK((NNAATTUURRAALL))GGAASS..
••
Tip
Each time you change the gas supply,
tick the box corresponding to the new gas
level on the label found in the plastic bag.
Refer to the corresponding "Gas
Connection" section.
Fig. 03
Fig. 04
Line
Line
Wrench
Wrench
Fig. 02
Wrench
Injector
Crucible
Fig. 01
Switch
1/ INSTALLING YOUR APPLIANCE
Natural
gas
Butane/Propane
99641823_A_ML.qxp 12/09/2007 10:16 Page 43

44
1 / INSTALLING YOUR APPLIANCE
••
Tip
- Each time you change the gas supply,
tick the box corresponding to the new gas
level on the label found in the plastic bag.
Refer to the corresponding “Gas
Connection” section.
— Replace the corresponding gas injectors, in
accordance with the positioning of the
injectors and the gas characteristics table
shown at the end of this section . To do this:
— First screw them in manually until the
injector locks into place.
— Apply the corresponding spanner to the
injector.
— Turn the spanner clockwise .
Warning
Screw on the adaptor with a torque not
exceeding 4 N.m.
Exceeding this limit may damage the
product.
—
Replace the head of the burner, the cap and
the grill.
CHANGING THE GAS SUPPLY
(High-power burner)
Warning
Your appliance is sold pre-set for
natural gas. The injectors required for
adapting it to butane/propane can be found
in the plastic bag containing this guide.
Each time you change the gas supply, you
must complete the following:
— Flip the gas changing switch TO THE RIGHT or
TO THE LEFT depending on the gas selected (Fig.
01).
— Adapt the gas connection
— Change the injectors
— Adjust the hob connections.
•
AAddaapptttthheeggaassccoonnnneeccttiioonn: Refer to the
“Gas Connection”
section.
•
CChhaannggeetthheeiinnjjeeccttoorrss,,proceeding as
follows:
— Replace the grill, the cap, and the head of
the burner.
— Using a No.10 spanner, unscrew the central
injector located at the base of the burner unit
(see ) and using a No. 7 spanner, unscrew
the 3 injectors located around the central
injector (see ) around (
Fig. 02).
B
A
Fig. 02
B
A
Fig. 01
Interrupteur
Gaz naturel
Gaz
Butane/Propane
99641823_A_ML.qxp 12/09/2007 10:16 Page 44

45
CHANGEMENT DE GAZ SUR LE BRULEUR TRIPLE COURONNE
REGLAGE AU GAZ NATUREL REGLAGE AU GAZ BUTANE/PROPANE
G
N
Petit Chapeau de brûleur
B U T
!!
Chapeau de brûleur
principal
Brûleur principal
!!
!! !!
Petit brûleur centralPetit brûleur central
NB
Petit brûleur central
Spécifique Butane/Propane
(Livré dans la pochette)
Petit brûleur central
Spécifique Gaz Naturel
N
B
Small burner cover
Small central burner
Main burner cover
Main burner
NNAATTUURRAALLGGAASSSSEETTTTIINNGGBBUUTTAANNEE//PPRROOPPAANNEEGGAASSSSEETTTTIINNGG
Small central burner
Specific for Natural Gas
Small central burner
Specific for Butane/
Propane Gas
Provided in the small bag
CCHHAANNGGIINNGGTTHHEEGGAASSSSUUPPPPLLYYOONNTTHHEETTRRIIPPLLEECCRROOWWNNBBUURRNNEERR
99641823_A_ML.qxp 12/09/2007 10:17 Page 45

46
AApppplliiaanncceeiinntteennddeeddttoobbeeiinnssttaalllleeddffoorruusseewwiitthh::BBuuttaanneeggaassNNaattuurraallNNaattuurraall
ggaassggaass
FFRR..............................................................ccaatt::IIII22EE++33++G30 G31 G20 G25
GGBB..............................................................ccaatt::IIII22HH33++
Hourly rate below: 28-30 mbar 37 mbar 20 mbar 25 mbar
at 15° C under 1013 mbars
TTRRIIPPLLEERRIINNGGBBUURRNNEERR
Marking engraved on injector 9900AA9900AA4455AA4455AA
Nominal heat release rate (kW) 3,30 3,30 3,65 3,65
Reduced heat release rate (kW) 1,650 1,450 1,450
Hourly rate (g/hr) 240 236
Hourly rate (l/hr) 348 404
AAUUXXIILLIIAARRYYBBUURRNNEERR
Marking engraved on injector 4455445566AA66AA
Nominal heat release rate (kW) 0,70 0,70 0,90 0,90
Reduced heat release rate (with safety) (kW) 0,300 0,350 0,350
Hourly rate (g/hr) 51 50
Hourly rate (l/hr) 86 100
CCEENNTTRRAALLBBUURRNNEERR
Marking engraved on injector 4499BB499BB7744BB7744BB
Nominal heat release rate (kW) 1,00 1,00 1,05 1,05
Reduced heat release rate (with safety) (kW) 0,620 0,615 0,615
Hourly rate (g/hr) 73 71
Hourly rate (l/hr) 100 116
EEXXTTEERRNNAALLRRIINNGG
Marking engraved on injector 6633BB6633BB9977BB9977BB
Nominal heat release rate (kW) 4,60 4,60 5,05 5,05
Reduced heat release rate (with safety) (kW) 2,050 2,050 2,050
Hourly rate (g/hr) 334 329
Hourly rate (l/hr) 481 559
EENNTTIIRREEHHOOBB22GGAASSBBUURRNNEERRSS3388CCMM
WWIITTHHTTRRIIPPLLEERRIINNGGBBUURRNNEERRSSAANNDDAAUUXXIILLIIAARRYY
Total heat release rate (kW) 4,00 4,00 4,55 4,55
Maximum flow rate (g/hr) 291 286
(l/hr) 434 504
EENNTTIIRREEHHOOBB11GGAASSBBUURRNNEERR3388CCMM
WWIITTHHHHIIGGHH--PPOOWWEERRBBUURRNNEERR
Total heat release rate (kW) 5,60 5,60 6,10 6,10
Maximum flow rate (g/hr) 407 400
(l/hr) 581 675
1 / INSTALLING YOUR APPLIANCE
•Gas Properties
FFRR--GGBBFFRR--GGBBFFRR--GGBBFFRR
99641823_A_ML.qxp 12/09/2007 10:17 Page 46

47
1 / INSTALLING YOUR APPLIANCE
• Markings on the injectors
The table below shows where the injectors
are positioned on your appliance according to
the type of gas used.
Each number is marked on the injector.
MMAARRKKIINNGGSSOONNTTHHEEIINNJJEECCTTOORRSS
3388ccmmhhoobbwwiitthh
aauuxxiilliiaarryybbuurrnneerr++ttrriipplleerriinnggbbuurrnneerr
63B
Natural Gas
45A
6A
90A
45
Butane/propane
gas
Example:
injector marking 95
3388ccmmhhoobbwwiitthh
hhiigghh--ppoowweerrffllaammee
Natural Gas
97B
74B
97B
97B
Butane/Propane Gas
63B
49B
63B
63B
99641823_A_ML.qxp 12/09/2007 10:17 Page 47

48
2 / USING YOUR APPLIANCE
DESCRIPTION OF YOUR HOB TOP
••
Model 2 burners with electronic controls
DTG738*/*
A
B
Auxiliary burner 0.85 kW ((**))
Triple-ring burner 3.6 kW ((**))
High-power burner 6,1 kW ((**))
((**))Power obtained with G20 natural gas
Model 1 burner with electronic controls
DTG708 */*
B
A
C
C
99641823_A_ML.qxp 12/09/2007 10:17 Page 48

49
2 / USING YOUR APPLIANCE
••
CCOORRRREECCTTIINNCCOORRRREECCTT
CCOONNCCAAVVEECCOONNVVEEXX
Fig. 01
Fig. 02
Fig. 03
COOKWARE TO BE USED WITH GAS BURNERS
• Which burner should you use depending on your cookware?
— Adjust the ring of flames so that they do
not extend beyond the edges of the
cookware (Fig. 01).
— Do not use cookware with a concave or
convex bottom (Fig. 02).
— Do not leave a gas burner operating with
empty cookware.
— Do not use cookware that partially covers
the control panel.
— Do not use cookware that goes over the
edges of the cooking hob.
— Do not use heat distributors, toasters
(Fig. 03), steel meat broilers or stewpots that
have feet resting on or touching the
glass top
— Only cooking hobs with the “high power”
burner are equipped with a special “wok”-
type grid.
This wok type grid allows you to use
concave cookware. Supplied only for “high
power” burners, it provides better flame
distribution under large receptacles such as
woks (Fig. 04).
— Keep natural ventilation orifices in
your home open or install a mechanical
ventilation device (mechanical ventilation
hood).
— Intensive, prolonged use of the appliance
may require additional ventilation; you can,
for example, open a window or provide
more effective ventilation or increase power
to the mechanical ventilation, if such a
system is installed (a minimum air flow of 2
m3/hr per kW of gas power is required).
Example: 38 cm hob - 2 gas burners
total power: 3,6 + 0,85 = 4,45 kW
4.45 kW x 2 = 8.90 m3/hr minimum flow
Super fast
triple ring
20 to 30 cm
Frying,
Boiling
Semi-fast
auxiliary
8 to 14 cm
Gentle simmer
Burner
power flame
Max 30 cm
Wok
Ring
external
20 to 30 cm
Frying,
Boiling
Burner
central
8 to 14 cm
Simmering
Fig. 04
99641823_A_ML.qxp 12/09/2007 10:17 Page 49