DeDietrich DHB7952A User manual

•1
274
mm
900 mm
60 mm
500 mm
271,5 mm
Min 650 - Max 1002 mm
Min 750 - Max 1102 mm
542 mm
I

•1
1 x C
1 x F
1 x J
1 x L
5 x D/E
1 x H
1x K
+
2 x M
1 x P
4 x O
1.1
1 x G 1 x N
1.2
II

•2
125
150
125
150
B
A
C
D
E
2.1 2.2
2.3
III

•2
K
2.3.1
IV
2.3.2
X2
X2
X2
2.3.3

•2
2.4
F
H
I
G
H
I
K
J
L
V
M
M
P

•4
•3
4
3
4.1 4.2
VI

DEAR CUSTOMER,
EN
Discovering a De Dietrich product means experiencing
the range of unique emotions.
The attraction is immediate, from the moment you set eyes
on the product. The sheer quality of the design shines through,
thanks to the timeless style and outstanding finishes which make
each component an elegant and refined masterpiece in its own
right, each one in perfect harmony with the others.
Next, comes the irresistible urge to touch it.
De Dietrich design makes extensive use of robust and prestigious
materials, where the accent is place firmly upon authenticity.
By combining state-of-the-art technology with top quality materials,
De Dietrich produces
beautifully crafted products to help you get the most from the
culinary arts, a passion shared by all lovers of cooking and fine
food. We hope that you enjoy using this new appliance.
Thank you for choosing a De Dietrich product.

14
CONTENTS
EN
Important safety advice and precautions ......................................15
Identification ....................................................................................17
Installation ........................................................................................18
Electrical connection ..........................................................................18
Use in evacuation mode ....................................................................18
Use in recycling mode ........................................................................18
Fitting the hood ..................................................................................18
Fitting the duct ....................................................................................19
Use ....................................................................................................20
Lighting ..............................................................................................20
Lighting auto-stop ..............................................................................20
Switching on/off ..................................................................................20
Changing speed..................................................................................20
Automatic speed return ......................................................................20
Fan auto-stop......................................................................................20
Care....................................................................................................21
Problems ..........................................................................................22
Environment......................................................................................23
Customer service..............................................................................24

15
IMPORTANT SAFETY ADVICE AND PRECAUTIONS
These instructions are also available on the brand’s web site.
Please read this advice carefully before installing and using your appliance. These
instructions are intended to protect your safety and the safety of others. Keep this
manual with the appliance. If you sell or give the appliance to someone else, make
sure that you also give them this manual.
• With a view to constantly improving our products, we reserve the right to make
changes to their technical, functional or aesthetic characteristics in line with
technological progress.
• To easily locate the make, model number, etc. of your appliance, we recommend
that you note this information on the “After-Sales Service Department and Customer
Support” page.
Important precautions
• This appliance was designed for use by private persons in their
homes. Do not use it for commercial or industrial purposes or for
any other purpose than that for which it was designed.
• When you receive the appliance, unpack it or have it unpacked
immediately. Check its general appearance. Make a note of any
reservations on the delivery slip and keep a copy.
• This appliance can be used by children aged under 8 and by
persons with diminished physical, sensory or mental capacities, or
persons without any experience or knowledge, provided that they
are properly attended to or are given the instructions on how to use
the appliance in complete safety and that any potential risks are
anticipated. Children must not play with the appliance. The
appliance must not be cleaned or maintained by unsupervised
children.
• Caution: The accessible parts of this appliance may become hot
when used with cooking appliances.
• The appliance can be disconnected by using an accessible
power outlet or by incorporating a switch in the fixed lines,
in accordance with installation rules.
• Do not modify or attempt to modify any of this appliance’s
characteristics. Doing so could be dangerous.
• The appliance should only be repaired by an approved specialist.

16
IMPORTANT SAFETY ADVICE AND PRECAUTIONS
• Always disconnect the hood before carrying out cleaning or mainte-
nance.
• Never use steam or high-pressure tools to clean your appliance (due
to electrical safety considerations).
Risk of asphyxiation
• Regulations on the evacuation of air must be complied with. Air must
not be sent into a duct used to evacuate fumes from appliances that
use gas or other fuels (this does not apply to appliances that only
emit air into the room).
• The room must be suitably ventilated when the cooker hood is used
at the same time as appliances that use gas or other fuels (this does
not apply to appliances that only emit air into the room).
Risk of fire
• Flambé-ing food or turning on gas rings below the hood, unless they
are covered by a pan is prohibited, since the flames could be sucked
in and damage the appliance.
• Keep a constant watch on fryers used below the hood. When heated
to very high temperatures, oil and fat can catch fire.
• Clean the appliance and replace filters at the recommended fre-
quency. Accumulated deposits of grease could cause a fire.
• Using the hood above a solid fuel range (wood, coal, etc.) is prohi-
bited.
• If the hood is installed above a gas-fired appliance, leave at least
65 cm between the top of the hob and the underside of the hood. If
the instructions for a hob installed below the hood specify a distance
greater than 65 cm, then that distance must be applied.

17
•1IDENTIFICATION
1.1 - PARTS LIST
C - Drilling template
D/E - Plug and + screws (duct support)
F - Duct support
J - Adapter
H - Duct
K - Fixing bracket
L - Hood body
M - Screws (for fixing duct)
O - Screws (for fixing motor)
P - Motor bracket
1.2 - OPTIONAL RECYCLING KIT
G - Fume deflector
N - Carbon filters
These parts are available from AFTER-
SALES SERVICE

18
•2INSTALLATION
ELECTRICAL CONNECTION
During installation and maintenance ope-
rations, the appliance must be disconnec-
ted from the mains; fuses must be
isolated or removed.
The electrical connections should be
made before the appliance is installed in
its housing.
Check that:
- the electrical installation is sufficiently
rated,
- the supply wires are in good condition,
- the diameter of the wires complies with
the installation requirements.
This appliance is supplied fitted with a
3-core (phase, neutral and earth)
0.75mm2H 05 VVF cable. It must be
connected to a 220-240V single phase
mains network via an IEC 60083 socket
which must remain accessible after ins-
tallation, in accordance with the installa-
tion rules.
The fuse in your installation must be 10
or 16A. If the mains cable is damaged,
call after-sales service and so avoid any
danger.
If the electrical installation in your home
requires any changes in order to connect
your appliance, contact a professional
electrician.
If the hood malfunctions in any way, un-
plug it or remove the fuse for the circuit
concerned.
The installation must comply with current
regulations for the ventilation of rooms. In
particular, air must not be evacuated into
a duct used to evacuate fumes from ap-
pliances using gas or other fuels. Disused
ducts may only be brought into service, if
approved by a competent specialist. The
evacuation line, whatever its type, must
not emerge in a loft space.
2.1 - USE IN EVACUATION MODE
You have a duct that leads outside.
Your hood may be connected to it via an
evacuation duct (minimum 125mm dia.,
made of enamelled, aluminium hose or
other non-flammable material). If your
duct is less than 125mm in diameter, you
must change to recycling mode.
2.2 - USE IN RECYCLING MODE
You do not have a duct leading to the out-
side.
All our appliances can operate in recy-
cling mode.
In such a case, purchase a recycling kit
comprising a set of active carbon filters
and a deflector.
Energy saving advice
To obtain the best performance from your
appliance, limit the number of bends and
length of the duct as much as possible.
To simplify the installation of your hood,
we have designed a two-step fitting sys-
tem, comprising:
1) Fitting the motor bracket.
2) Assembling the hood body and the
chimney.
2.3 - FITTING THE HOOD
The minimum distance between the coo-
king surface (2.3) and the lowest part of
the hood is 65cm. If the instructions for a
hob installed below the hood specify a
distance greater than 65 cm, then that
distance must be applied.
- Draw a horizontal line (A) at least 65cm
above the cooking surface.

•2INSTALLATION
19
- Draw a vertical line (B) on the wall, cen-
tred on the cooking surface running
from the ceiling to the previous horizon-
tal line (A).
- Place the drilling guide (C) against the
wall.
- Drill the two holes. Install the plugs.
For hollow walls, use suitable plugs and
screws (2.3).
2.3.1 - FITTING THE MOTOR BRACKET
(P)
- Screw the fixing bar to the wall (K) with
the two screws (D) (2.3.1).
- Attach the motor bracket via the sus-
pension fittings (2.3.1).
- Screw the fixing bracket (K) to the wall
with the two screws (D) (2.3.1).
- Attach the suction hood using the sus-
pension fittings.
- Adjust the height and level, using the
support adjustment screws (the top
screw for horizontal adjustment and the
lower screw for contact with the wall).
Caution: manually tighten without forcing
- Fit the locking screw that prevents the
appliance being lifted off the suspension
fittings (E).
2.3.2 - FITTING THE BODY OF THE
HOOD (L)
- Hold the body of the hood and slide it
into the motor support (2.3.2).
- Attach the hood coprs to the motor
mount using the 4 screws (O) and
connect the cables (2.3.3).
2.4 - FITTING THE DUCT
•Evacuation outside
- Fix the metal duct support at ceiling
height, using the two screws (D/E).
- For a 125mm diameter duct, use the
adapter supplied (J).
If your duct to the outside is less than
125mm in diameter, you must connect
your hood in recycling mode.
- Push the end of the duct on to the motor
outlet.
- Prepare your telescopic duct, taking
care to hide the ears.
- Push the duct, assembled thus, on to
the hood and lift the upper part to adjust
the height and then screw it on to the
metal duct support using the two
screws (M).
• Recycling (optional kit - available
from after-sales service)
- Fix the plastic fume deflector (G)
against the wall at ceiling height with
the two screws. Take care to centre the
deflector with reference to the vertical
line (B) drawn on the wall.
Add the two spacers (P), supplied in the
product pouch, to the deflector.
- Push one end of the duct on to the de-
flector and the other end on to the
motor outlet.
- Prepare the duct, taking care to position
the ears at the top, so that they are vi-
sible (H).
- Push the duct, assembled thus, on to
the hood and lift the upper part to adjust
the height and then screw it on to the
fume deflector using the two screws
(M).

•3USE
20
Light
Turn the switch to the symbol to
switch on the lights on your hood.
To increase or reduce the light level, hold
the switch on the symbol.
To switch the hood off, move the switch
to the symbol.
Light auto-stop
If you forget to turn off the light on your
hood, it will turn off automatically after 9
hours.
On/Off
Turn the switch to the symbol and the
light comes on; turn it once more to the
symbol and the hood starts at speed
setting 1.
Changing speed
Once the hood has been switched on,
you can adjust the suction speed.
Each movement clockwise ( symbol)
changes to the next higher speed (1, 2,
3, 4 and then goes back to 1).
Automatic speed return
On speed setting 3, the hood will return
automatically to speed 2 after 10 min.
At maximum speed (4), the hood will re-
turn automatically to speed 2 after 8 min.
Rotating the switch anti-clockwise (
symbol) stops the fan and switches off
the light.
Tip
To keep the light on when the hood is off,
turn the switch to the right immediately
after turning it to the left ( symbol).
Fan auto-stop
If you forget to switch off your hood, it will
switch off automatically after 9 hours.
Energy saving advice
Adjust the speed to the number of pans.
Use the rear burners on your hob for pre-
ference..

21
•4CARE
4.1 - CLEANING THE FILTER CAS-
SETTES
They must be cleaned after every
30 hours approximately of use or at least
once a month. Use a brush, warm water
and a mild detergent. Rinse and dry them
carefully before putting back in place.
4.2 - CHANGING THE CARBON FIL-
TER
This filter holds odours; it should be re-
placed after approximately 120 hours of
use.
Order these filters from your dealer.
- Remove the filter cassettes.
- Remove the two metal fixings (4)
- Remove the carbon filters (3)
- Fit new filter on to the filter cassettes.
- Re-position the 2 fixings (4).
- Fit the filter cassette back in place.
- Repeat this operation for all filter cas-
settes.
CLEANING THE OUTER SURFACES
To clean the outer surfaces on your
hood, use soapy water and do not use
scouring creams or scouring sponges.
4.3 - CHANGING THE LED LAMPS
Contact after sales service.

22
•5PROBLEMS
The hood does not work.
Check that:
• there is not a power cut.
• a speed has actually been selected.
The hood is not coping.
Check that:
• the motor speed selected is sufficient
for the quantity of fumes or steam
released.
• the kitchen is sufficiently ventilated to
allow air to be taken in.
• the carbon filter is not saturated (hood
in recycling mode).
The hood stops during operation.
Check that:
• there is not a power cut.
• the all-pole cut-off device has not
tripped.

23
•6ENVIRONMENT
CARE FOR THE ENVIRONMENT
This appliance’s packaging can be
recycled. Recycle and contribute towards
protecting the environment by disposing
of packaging in local waste containers
designed for this purpose.
Your appliance also contains a
lot of recyclable material. This
logo indicates that used
appliances must not be mixed
with other waste.
Appliance recycling organised by your
manufacturer is carried out under
optimum conditions, in accordance with
European Directive 2002/96/EC on the
disposal of waste electrical and
electronic equipment.
Contact your local authority or retailer for
information on used appliance collection
points close to your home.
Thank you for helping to protect the
environment.

24
•7CUSTOMER SERVICE
Any repairs to your appliance must be
made by a qualified professional accredited
to work on the brand. When calling, please
provide the full references of your appliance
(commercial reference, service reference,
serial number), so that we can handle your
call better. This information appears on the
manufacturer’s nameplate on the
equipment.