Defy DHD 394 User manual

PAGE 1 OF 12
TOUCH CONTROL
CERAN HOB
DHD 394
“600 TC”
OWNER’S
MANUAL
You can rely on Defy. To simplify
Part Number 068471
Please register your product at
www.defy.co.za
2 Introduction.
2 Unpacking.
2 Cupboard design.
2 Future transportation.
2 Disposing o the old appliance.
2 Aperture size.
3 Important sa ety instructions.
4 Installation.
5 Safety installation.
5 Electrical installation.
6 The controls.
8 Ceran smooth top.
9 Technical speci ications.
9 Error codes.
10 Problem check.
10 Owner’s responsibility.
11 De y Service Centres.
12 Warranty.

PAGE 2 OF 12
Congratulations on the purchase of this quality appliance. We trust that you will enjoy many
years of trouble free use. Please read these instructions carefully before using the
appliance. This book will provide you with information on how to operate and care for your
appliance in order that you gain the maximum benefit from it.
Unpackin
• Please ensure that packaging material is disposed of in a responsible manner.
• Plastic bags should be cut up to prevent children playing with them and accidentally
suffocating.
• ome models feature a protective film over stainless steel trim. This film must be
carefully removed before using the hob.
• If the appliance is damaged in any way, do not use it. Report the damage to your dealer,
who will take the necessary corrective action.
Cupboard desi n
• Cooking appliances generate considerable heat. The layout and materials of the mounting
cabinet should take account of these characteristics.
• urfaces and surrounding edges immediately adjacent to the hob should be able to
withstand temperatures of up to 100°C without delaminating or discolouring.
Future Transportation
• Keep the appliances original carton and transport the product in it. Follow the instructions
on the carton. If you do not have the original carton, pack the appliance in bubble wrap or
thick cardboard and tape it securely.
• ecure the caps and pan supports with adhesive tape.
Disposin of the old appliance
• Dispose of the old appliance in an environmentally friendly manner.
• Refer to your local dealer or solid waste collection centre in your area to learn how to
dispose of your appliance. Before disposing of the appliance, cut off the power cable plug
and make the door lock (if any) unusable to avoid dangerous conditions to children.
Aperture size
560 mm
490
70
+ 3
- 0
+ 3
- 0
Introduction

PAGE 3 OF 12
Important safety instructions
This section contains sa ety instructions
that will help you avoid risk o injury and
damage. All warranties will become void
i you do not ollow these instructions.
General safety
• This appliance is not intended for
use by persons (includin children)
with reduced physical, sensory or
mental capabilities, or lack of
experience and knowled e, unless
they have been iven supervision or
instruction concernin the use of
the appliance by a person
responsible for their safety.
• Children should be supervised to
ensure that they do not play with the
appliance.
• Always keep children and in irm
persons away rom the appliance when
it is in use.
• I the supply cord is damaged, it must
be replaced by the manu acturer, its
service agent or similar quali ied
persons in order to avoid a hazard.
• Do not operate the appliance i it is
de ective or has any visible damage.
• Do not carry out any repairs or
modi ications on the appliance.
• Never wash down the appliance with
water! There is the risk o electric
shock!
• Never use the appliance when your
judgment or coordination is impaired by
the use o alcohol and/or drugs.
• The appliance must be disconnected
rom the mains during installation,
maintenance, cleaning and repair
procedures.
• Be care ul when using alcoholic drinks
in your dishes. Alcohol evaporates at
high temperatures and may cause a
ire since it can ignite when it comes
into contact with hot sur aces.
• Only use the appliance or preparing
ood.
• Do not use the appliance or heating
closed tins and glass jars. The
pressure that would build up in the tin/
jar may cause it to burst.
• Do not place any lammable materials
close to the appliance as the sides
may become hot during use.
• Keep all ventilation slots clear o
obstructions.
• The appliance may be hot when it is in
use. Never touch the hot cooking
zones.
• Make sure that the hob controls are
switched o a ter every use.
• Use a deep pan, large enough to cover
the appropriate cooking zone.
• Always dry ood thoroughly be ore
placing it in hot oil or at. Frozen ood
in particular will spit and splatter i
added too quickly.
• Never ill the pan more than one third
ull o at or oil.
• Never heat at or ry with a lid on the
pan.
• Do not ry too much ood at once. This
lowers the temperature o the oil or at
and results in atty oods.
• Do not leave hot at or oil unattended.
I overheating occurs, these could
catch ire.
• Do not use or store in lammable
products (alcohol, petrol, benzene etc.)
near the appliance as these pose a ire
risk.
• Do not cover the hob or burners with
aluminium oil.
• Switch o the power at the mains in
the event o a ault or when cleaning
the appliance.
Check the general appearance o
your appliance or any damages
that might have occurred during
transportation.

PAGE 4 OF 12
Installation is the buyer’s responsibility. The manufacturer accepts no liability for this service.
Any action that the manufacturer has to take as a result of an erroneous installation will not be
covered by the warranty.
• The hob is supplied with securing clips.
• These fit into dedicated slots around the hob base. (see picture A).
• Insert the clips. (as shown in picture B).
• Lift the clips up until they click into place. (as shown in picture C).
• To avoid liquid spills penetrating between the hob and the worktop, apply the supplied self-
adhesive seal to the perimeter of the aperture. Do not use a silicone sealer.
• Invert the hob on the worktop adjacent to the aperture before making the electrical
connection. This will ensure sufficient cable length for subsequent servicing.
• Position the hob into the aperture so that the securing clips are compressed between the hob
base and the worktop. (see ketch below).
A B C
Important notice
• Hobs with control panels require additional installation instructions. See page 4.
• The Manu acturer strives or continuous improvements. For this reason, the text and
illustrations in this book are subject to change without notice.
SIDE VIEW
WORKTOP
SELF ADHESIVE SEAL
HOB
CLIP
Installation

PAGE 5 OF 12
VERY IMPORTANT SAFETY INSTRUCTION
Safety installation for hob with control panel
• A removable horizontal board must be fitted below the hob and 75mm away from the worktop
bottom face.
• pace between this board and the hob must be empty and no objects may be stored or kept there.
• This board will effectively shield the user from the base of the hob which gets hot during use.
The board needs to be removable for service purposes as the hob, once installed, can only be
loosened from below.
• If the hob is installed with a side adjacent to a vertical kitchen cabinet, the distance between the
edge of the hob and that of the cabinet side must be a least 150mm. The distance between the back
wall and the rear edge of the hob must be at least 55mm.
!
Electrical installation
This appliance must be earthed and the manufacturer and the seller do not accept
responsibility for any dama e due to incorrect installation or electrical connection.
Earth leaka e
This hob should not be connected through an earth leakage system. Refer to .A.N. . 10142
Connection to the power supply must be carried out by a licensed electrician, who will ensure
that the hob is correctly connected and safely earthed. The rated current is printed on the serial number
label attached to the base cover. The hob must be connected to the mains through a double pole
isolating switch which has a minimum clearance between the contacts of 3 mm. in both poles. A
means for disconnection must be provided in the fixed wiring.
Note:
The appliance is not intended to be operated by means of an external timer or separate remote-control
system.
Please see the section pertaining to electrical connection as described in the hob manual.

PAGE 6 OF 12
Ceramic lass cooktop
A. On/Off sensor
B. Cooking zone power indicators (Hot
surface indicators)
C. Cooking zone selection and (+) ensor
D. (-) ensor
E. Extension zone On/Off sensor
F. Extension zone indicator light
1. Cooking zone Hi Light front left
2. Cooking zone Hi Light rear left
3. Cooking zone Hi Light rear right
4. Cooking zone Hi Light front right
5. Hob controls
Hob control elements
Controls
Hob control
• The hob is fitted with electronic sensors which are activated when the relevant circular
touch pad is pressed for at least one second.
• Each sensor activation is followed by an audible tone.
• To avoid false touch pad activations do not place any objects on the touch pad area.
• Always keep the touch pad surface area clean.
Switchin a cookin zone on
• Press the on/off sensor (A) for at least one second to switch the hob on, all hotplate
power indicators (B) indicate ‘0’. The next setting must be selected within 20 seconds to
prevent the hob from switching off.
• Activate the required cooking zone by pressing the relevant ( ) sensor (C)
• et the desired cooking power from 1- 9, using the ( ) or (-) sensors (C and D )
• Continuous pressing of (C) or - (D) increases or reduces the power level.
• Alternatively, power levels may be sequentially adjusted by pressing (C or D) for at least
1 second.
• Note that settings are only possible for one hotplate at a time.

PAGE 7 OF 12
Switchin a cookin zone off
• Press the (-) sensor (D) and set the power level to ‘0’, the hotplate will switch off after 10
seconds. hortly thereafter the hot surface indicator light on the hob will switch on, dis-
play (H) and remain on for 20 to 30 minutes after the plate is switched off. This is a re-
minder that the hob surface is still too hot to touch.
• Fast deactivation. Press both and — (C and D) touchpad sensors simultaneously to
switch the hotplate off immediately.
Switchin the hob off
• witch the hob off by pressing the On / Off sensor (A).
Controls
Remainin heat indicator
The remaining heat may be used for warming food as long as the symbol ‘H’ remains on after
the cooking zone has been switched off.
Caution!
Even when the symbol ‘H’ disappears the cooking zone may still be hot. Do not touch the
cooking zones.
Extended cookin zone
• Both cooking zones switch on when switching the top left cooking zone on.
• Pressing extension zone sensor (E) switches the outer circuit of the cooking zone off.
• Pressing the extension zone sensor (E) again will reactivate the outer circuit.
• An indicator light (F) shows when the outer zone is active.
For improved safety your hob is fitted with a temperature limiter preventing the zone from
overheating should a pot boil dry etc.

PAGE 8 OF 12
WARNING In the unlikely event of the Ceran sustaining accidental damage or cracks,
switch off the appliance at the mains to avoid electric shock and have the panel replaced
before further use.
Carin for the Ceran hob
• Ceran is a tough, durable material, which provides a beautiful, functional and long
lasting cooking surface. To keep it looking good, it needs to be treated with care and
cleaned regularly.
• Wipe spillage off as soon as possible with a damp cloth, preferably while the hob is
still warm.
• Clean the hob with a nylon pad and a suitable smooth top cleaning solution, which is
available from all Defy ervice Centres. Remove calcium stains (yellow stains) by
applying a small amount of lime remover such as vinegar or lemon juice. Other
suitable commercially available products can also be used.
• If necessary stubborn spills may be removed using the blade scraper provided.
• Do not use metal scourers or coarse abrasive powders as these could scratch the Ceran.
• Regular cleaning after use will prevent dirt build up and ensure that the hob remains
bright and attractive.
• Wipe the hob surround with a damp hot soapy cloth and dry.
• DO NOT USE A STEAM CLEANER.
Recommendations (see also the enclosed ‘CERAN’ leaflet)
• Use only pots with a solid level base. An uneven base will prolong cooking time and
waste energy.
• Use pots with a base diameter slightly larger than that of the thermal area. This will
ensure even heat distribution and prevent spillage from dripping onto and staining the
hot zone.
• Always cover the pot with a lid. This will conserve energy and minimize spillage.
• ave energy by switching the plate off 5 to 10 minutes before the end of a lengthy
cooking period. The Ceran hob will retain sufficient residual heat to complete the
cooking process.
• A pot with rough edges could scratch the Ceran if it were dragged across the surface of
the hob.
• Any spillage of sugar solution such as jam, must be removed immediately. If allowed
to cool on the Ceran it could pit and damage the surface.
• Do not cover the Ceran with aluminium foil and do not use poor quality aluminium
pots. These will leave unsightly deposits which in time, could adhere to the Ceran.
Ceran® smooth top

PAGE 9 OF 12
Model DHD 394
Volts 220V –240V 50Hz~
Amperes 28
Plate power ratin (W)
Front cooking zone le t 140, 1200
Front cooking zone right 140, 1200
Rear cooking zone right 180, 1800
Rear cooking zone le t 210/120, 2200/750
Total power (W) 6400
Type o switch Electronic sensors
Width
Depth
580 mm
510 mm
ERROR CODE ERROR DESCRIPTION WHAT TO DO
ER03
& permanent tone
Continuous holding down o sensors.
Control unit cuts o a ter 10 seconds.
Water or a cooking utensils may be posi-
tioned over the control unit causing inter-
erence.
CONTACT YOUR DEFY SERVICE
CENTRE AND SPECIFY THE ERROR
CODE
ER21 Overheating: The control unit switches
o in order to avoid damage to the unit
CONTACT YOUR DEFY SERVICE
CENTRE AND SPECIFY THE ERROR
CODE
U400 Secondary voltage o the power unit is
too high. Control unit switches o a ter
one second and permanent tone is emit-
ted.
1 CONTACT YOUR DEFY SERVICE
CENTRE AND SPECIFY THE ERROR
CODE
2 CONTACT AN ELECTRICIAN TO
CHECK THE MAINS POWER SUPPLY
ER22 Touch pad evaluation is de ective. Con-
trol unit switches o a ter 3.5—7 se-
conds. Short circuit or there is a problem
with the sensor evaluation range
CONTACT YOUR DEFY SERVICE
CENTRE AND SPECIFY THE ERROR
CODE
ER36 NTC value is not within its speci ication.
(Value < 200mV or > 4.9V; Control unit
cuts o . Short circuit or cut o at NTC
CONTACT YOUR DEFY SERVICE
CENTRE AND SPECIFY THE ERROR
CODE
ER20 Flash ailure. Micro controller aulty CONTACT YOUR DEFY SERVICE
CENTRE AND SPECIFY THE ERROR
CODE
ER40 Secondary operational voltage is too
low. (1.8V <U Power ail< 2.9V) Primary
PTC too hot
CONTACT YOUR DEFY SERVICE
CENTRE AND SPECIFY THE ERROR
CODE
Error codes
Technical Specifications

PAGE 10 OF 12
PROBLEM
The plates do not work
Remember that you may be charged for a service call even during the warranty period if the
fault is due to or caused by the above.
Before calling a service technician to assist with a problem,
SOLUTION
Check there is power to the wall switch.
Since the followin are not factory faults, they are the owner’s responsibility.
• Damage to exterior finish.
• Breakage of glass and other components.
• Damage through improper use or installation of the appliance.
• Damage caused by moving the appliance.
Did you remember to fill in the purchase details below?
Owner’s responsibility
Problem check
Record in the space below the listed in ormation or uture re erence. The serial number
may be ound on the label attached to the hob base.
SERIAL NUMBER..
DATE OF PURCHASE...
PURCHASED FROM..
.

PAGE 11 OF 12
If you have followed the instructions and still have a problem, contact the
nearest Defy Technical Support Centre. They will be able to advise you on any
aspect of the product or send a qualified technician to repair it.
BLOEMFONTEIN
CAPE TOWN
DURBAN
EAST LONDON
JOHANNESBURG
Commercial Head O ice,
Administration, Distribution, National Groups,
Tel. Sales, Contracts and Credit.
POLOKWANE
PORT ELIZABETH
PRETORIA.
160 Long Street, Hilton,
Bloem ontein 9301.
Tel. [phone]
Bloem ontein.Service@de y.co.za
5A Marconi Rd.
Montague Gardens, 7441.
Tel. [phone]
CapeTown.Service@de y.co.za
35 Intersite Avenue,
Umgeni Business Park, Durban 4051.
Tel. [phone]
Durban.Service@de y.co.za
16 Bowls Rd. Arcadia,
East London 5201.
Tel. [phone]
EastLondon.Service@de y.co.za
Cnr. Mimetes & Kruger St. Denver ext.12
Johannesburg. 2094.
Tel. [phone] or 011 621 0300
Gauteng.Service@de y.co.za
87 Nelson Mandela Drive.
Superbia 0699.
Tel. [phone] / 7 / 8 / 9.
Polokwane.Service@de y.co.za
112 Patterson Road,
North End, Port Elizabeth 6001.
Tel. [phone]
PortElizabeth.Service@de y.co.za
Block A1 Old Mutual Industrial Park.
Cnr. D.F.Malan Drive & Moot Str.
Hermanstad. 0082.
Tel. [phone]
Pretoria.Service@de y.co.za
OTHER AREAS ARE SERVICED BY OVER 200 AUTHORISED AGENTS.
CONSULT THE NEAREST REGIONAL SERVICE CENTRE FOR DETAILS.
Defy Service Centres

PAGE 12 OF 12
This certificate is issued by DEFY APPLIANCE (PTY) LTD manufacturers of Defy and Ocean products,
hereinafter the Company, to the original purchaser only, of the appliance described on the certificate and
shall constitute the only warranty given in respect of this appliance.
The Company warrants to the original purchaser that for a period of TWO YEAR from date of purchase the
appliance is free from defect under normal domestic use, both in workmanship and material, subject to the
following conditions.
1. Repair or replacement of any part of this appliance, found by the Company to be defective, shall be at the
election of the Company. The Company reserves the right to effect such service through any of its ervice
Divisions or Authorised ervice Dealers. The cost of such service shall be borne by the Company in full,
provided that the appliance is located no further than 50 km from a Company ervice Centre or an
Authorised ervice Dealer. Where the appliance is located beyond the 50 km radius, the purchaser shall
be liable for the standard travelling charges, as determined by the Company.
CARRY IN ERVICE Microwave ovens, Compact cookers and small appliances are repaired in our
service centres and are not collected from the customers home. Faulty units should be delivered to the
purchasing dealer or to the nearest Company ervice Centre for warranty repairs.
2. Rusted or corroded plates, vitreous enamelware, fuses and lamps are specifically excluded from these
warranties. It is an express condition of these warranties that the purchaser takes due care and attention in
the use and maintenance of the appliance. Abuse, misuse in conflict with operating instructions, connection
to incorrect voltages and subjection to commercial use shall release the Company from its obligations.
3. This warranty shall become void and cease to operate if the appliance is dismantled by, or any repairs to
the appliance are effected by any persons not duly authorised by the Company, or if substitute parts not
approved by the Company are used in the appliance, or if the serial number of the appliance is removed.
4. The Company shall not be responsible for damages resulting from fire, flood, civil disturbances or any
Act of God. The Company shall not, in terms of these warranties be responsible nor held liable for any
consequential loss or damage of any kind caused by or due to the failure or malfunction of the appliance.
5. The Company shall not be responsible for transportation or other costs other than those incurred within
the provisions of Point 1 of this Certificate.
6. These warranties shall not apply to the appliance if it is purchased or used beyond the borders of the
Republic of outh Africa, Namibia, Botswana, waziland and Lesotho.
7. Where service is requested under warranty and no fault or defect can be found by the Company, all costs
incurred will be for the purchaser's account.
8. This Certificate as well as your invoice will serve as proof of purchase. For the purpose of warranty, it
will be essential to produce this Certificate and invoice. Failure to do so, will render the purchaser liable for
service costs.
KEEP THIS CERTIFICATE AND SALES INVOICE AS PROOF OF PURCHASE FOR
WARRANTY PURPOSES.
Warranty