Dell SonicWall NSA 2600 User manual

Getting Started Guide
Dell SonicWALL Network Security Appliances
NETWORK SECURITY
NSA 2600
For localized product information, see page 48.
ᴹޣᵜൠӗ૱ؑ᚟ˈ䈧৲➗ㅜ亥DŽ
䝻䞊䜹䝷䜲䝈䛥䜜䛯〇ရ䛾᝟ሗ䛻䛴䛔䛶䛿䚸㻠㻥㻌䝨䞊䝆䜢ཧ↷䛧䛶䛟䛰䛥䛔䚹
Ь˲߭ࢿ૽ࢽؿЕ૓ࢇձˈଜۿࡁ
Para informação localizada do produto, veja página 50.

| 1
Notes, Cautions, and Warnings
© 2014 Dell Inc.
All rights reserved.
Trademarks: Dell™, the DELL logo, SonicWALL™, and all other SonicWALL product and service names and slogans are trademarks of
Dell, Inc. Other product and company names mentioned herein may be trademarks and/or registered trademarks of their respective
companies and are the sole property of their respective manufacturers.
2014 – 04 P/N 232-002067-53 Rev. A
NOTE: A NOTE indicates important information that helps you make better use of your system.
CAUTION: A CAUTION indicates potential damage to hardware or loss of data if instructions are not followed.
WARNING: A WARNING indicates a potential for property damage, personal injury, or death.

2| In this Guide
In this Guide
The Dell SonicWALL NSA 2600 appliance is designed to be the most scalable, reliable, and best performing multifunction appliance in its
class.
This Getting Started Guide provides instructions for basic installation and configuration of the Dell SonicWALL NSA 2600.
Chapter 1 Sections Include
"Introduction to the NSA Appliance" on
page 5 •"NSA 2600 Package Contents" on page 6
•"The Front Panel" on page 7
•"The Back Panel" on page 8
•"Using this Getting Started Guide" on page 9
Chapter 2 Sections Include
"Configuring the Appliance" on page 11 • "Determining the WAN Type" on page 12
•"System Requirements" on page 12
•"Recording Configuration Information" on page 13
•"Initial Setup" on page 14
•"Troubleshooting Your Connections" on page 19

In this Guide | 3
Additional Information
The following sections provide additional information for the Dell SonicWALL NSA 2600 appliance.
•"Support and Training Options" on page 45
•"Product Safety and Regulatory Information" on page 51
Chapter 3 Sections Include
"Registering, Licensing, and Upgrading" on
page 21 •"Using MySonicWALL" on page 22
•"Creating a MySonicWALL Account" on page 22
•"Registration Overview" on page 23
•"Registering in SonicOS" on page 23
•"Alternative Registration Options" on page 24
•"Security Services and Software" on page 25
•"Activating & Managing Licenses Using MySonicWALL" on page 26
•"Upgrading Firmware" on page 27
Chapter 4 Sections Include
"Deployment Scenarios" on page 31 • "Advanced Deployment Scenarios" on page 32
•"Configuring NAT Mode Gateway" on page 36
•"Configuring a Stateful HA Pair" on page 37
•"Configuring L2 Bridge Mode" on page 43

4| In this Guide

| 5
Introduction to the NSA Appliance
In this Section:
This section describes the items shipped with the Dell SonicWALL NSA 2600 appliance, provides front and rear illustrations of the NSA
appliance, and includes a flow diagram illustrating the steps for setting up the appliance.
•"NSA 2600 Package Contents" on page 6
•"The Front Panel" on page 7
•"The Back Panel" on page 8
•"Using this Getting Started Guide" on page 9
1

6| NSA 2600 Package Contents
NSA 2600 Package Contents
Before you begin the setup process, verify that your package contains the following items:
1. One Dell SonicWALL NSA 2600 appliance
2. Two Rack Mount Ear Kits
3. One serial CLI cable
4. One Ethernet cable
5. One power cord*
6. One Dell SonicWALL NSA 2600 Getting Started Guide
*The included power cord is approved for use only in specific countries or regions. Before using a power cord, verify that it is rated and approved for use in your location. The
power cord is for AC mains installation only. See Safety and Regulatory Information for more information.
Missing Items? If any items are missing from your package, contact Dell SonicWALL Support:
Web: http://www.sonicwall.com/us/Support.html
Email: [e-mail]
Getting Started Guide
Dell SonicWALL Network Security Appliance
NETWORK SECURITY NSA 2600
1
56
4
3
2
SonicWALL NSA 2600 CONSOLE
SDHC
MGMT
X6 X4 1GE X2 X0 M0
X1X3X5X7
ALARM
M0
TEST
PWR
Expansion Module

The Front Panel | 7
The Front Panel
SonicWALL NSA 2600 CONSOLE
SDHC
MGMT
X6 X4 1GE X2 X0 M0
X1X3X5X7
ALARM
M0
TEST
PWR
Expansion Module
Console Port
USB Ports (2)
Reset Button
LED Indicators
MGMT Port (1 GE)
X0-X7 (1 GE)
Access the SonicOS Command Line
Interface (CLI) via the enclosed serial
CLI cable
For 3G/4G/Analog modem adaptor support
Press and hold for several seconds to
set the appliance into Safe Mode.
High-speed copper Gigabit Ethernet ports
Expansion Module Bay
For Dell SonicWALL-approved
expansion modules
Power: Blue: Indicates power supply is operating correctly
Yellow: Indicates power supply is disconnected
Test: Quick Blinking Yellow: Initializing
Slow Blinking Yellow: Safe Mode
Solid Yellow: Test mode
Alarm: Indicates alarm activity in Red LED
M0: Indicates Expansion Module 0 activity in Red LED
1 Gigabit Ethernet Management Interface
SDHC Port
Secure Digital High-Capacity (SDHC)
port for future use

8| The Back Panel
The Back Panel
Note: See "Safety and Regulatory Information" on page 52 for important additional information on power supply requirements for the
Dell SonicWALL NSA 2600 appliance.
I
o
Fans (2)
Power Supply
Dual auto-throttling fans for system
temperature control
Provides power to the Dell SonicWALL
appliance by plugging in the AC cord and
switching the appliance on

Using this Getting Started Guide | 9
Using this Getting Started Guide
The following flow chart illustrates the necessary steps in the process of getting started with your new Dell SonicWALL NSA 2600
appliance.
Verify
Pre-Configuration
Requirements
Start Up
Management
Computer
Perform Initial
Setup
Register
Appliance in
SonicOS
Complete
Deployment
Configuration
Create a
MySonicWALL
Account
Configuration Process
Registration, Licensing, and Deployment Process