Dell Dimension 5000 User manual

Dell™Inspiron™5000Series
Model PPM
Information in this document is subject to change without notice.
©2000–2001 Dell Computer Corporation. All rights reserved.
Reproduction in any manner whatsoever without the written permission of Dell Computer Corporation is strictly forbidden. Trademarks used in this text: Dell, the
DELL logo, and Inspiron are trademarks of Dell Computer Corporation; Microsoft, Windows, MS-DOS, and WindowsNT are registered trademarks of Microsoft
Corporation; Intel and Pentium are registered trademarks, and Celeron and Intel SpeedStep are trademarks of Intel Corporation; Adobe is a trademark of Adobe
Systems Incorporated, which may be registered in certain jurisdictions.
Other trademarks and trade names may be used in this document to refer to either the entities claiming the marks and names or their products. Dell Computer
Corporation disclaims any proprietary interest in trademarks and trade names other than its own.
A0126Feb2001
Technical Overview
Removing and Replacing Parts
Drivers and Utilities for Microsoft Windows
98
Drivers and Utilities for Microsoft Windows
2000
Drivers and Utilities for Microsoft Windows
Me
Conserving Power
System Setup Program
System Messages
Ports and Connectors
Technical Specifications
Documentation Links

Back to Contents Page
DocumentationLinks:Dell™Inspiron™5000Series

Printed Documentation
To save PDF files (files with an extension of .pdf) to your hard-disk drive, right-click the document title, click Save Target As in Microsoft®Internet Explorer or
Save Link As in Netscape Navigator, and specify a location on your hard-disk drive.
Right-click only the following links:

OnlineDocumentation
Inspiron 5000
Downloading the Help and Associated Files
1. Right-click the following link to the popup.ocx file: popup.ocx
2. Click Save Target As in Microsoft Internet Explorer or Save Link As in Netscape Navigator, and specify c:\windows\system for Windows 98 or c:\winnt\
for Windows NT on your hard-disk drive.
3. Click the Start button on the Microsoft Windows®desktop, and then click Run.
4. Type regsvr32 popup.ocx and then press <Enter>.
5. Click OK when the installation is complete.
Downloading the Help File
1. Click the appropriate button to download the zipped file and save it to your hard-diskdrive.
Printed Documentation
Online Documentation
You must right-click the link for a portable document format (PDF) file and save the file to your hard-disk drive. Attempting to
link directly to large PDF files causes your system to freeze.
NOTES:PDFfilesrequireAdobe™AcrobatReader,whichcanbedownloadedfromthefromtheAdobeWorldWideWebsiteat:
http://www.adobe.com/acrobat/.
To view a PDF file, launch Acrobat Reader. Click File –> Open and select the PDF file.
Document Title
File Format
File Size
Getting Started Inspiron 5000
.pdf
815 KB
Start Here Inspiron 5000e
.pdf
397 KB
Dell Inspiron Systems Setup Guide
.pdf
412 KB
Dell Inspiron 5000 Reference and Troubleshooting Guide
.pdf
2.14 MB
Dell Inspiron 5000 Port Replicator User's Guide
.pdf
949 KB
Dell Inspiron 5000e System Solutions Guide
.pdf
1.78 MB
Removing and Replacing Parts
.pdf
2.23 MB
Compiled HTML Help files (files with an extension of .chm) require Microsoft Internet Explorer 4.0 or later.

2. Go to the directory location you specified when you saved the file.
3. Double-click the .exe file you downloaded. The WinZip Self-Extractor dialog box appears.
4. Specify the location to save the unzipped files to and click Unzip.A message stating that the files unzipped successfully appears.
5. Click OK.
6. Click Close.
Viewing the Help File
1. Start your browser and open the index.htm file in the directory containing the unzipped files.
2. Click the Start button on the Windows desktop, point to Programs, and then click Windows Explorer.
3. Navigate to the directory in which you saved the Help file.
4. Double-click the file.
Inspiron 5000e
Downloading the Help and Associated Files
1. Click the following link to download the help_dll.exe file: help_dll.exe
2. Save the link to the default directory, c:\windows\systems.
3. Go to the directory location you specified when you saved the file.
4. Double-click the .exe file you downloaded. The WinZip Self-Extractor dialog box appears.
5. Specify the location to save the unzipped files to and click Unzip. A message appears, stating that the files unzipped successfully.
6. Click OK.
7. Click Close.
Downloading the Help File
1. Click the appropriate button to download the zipped file and save it to your hard-diskdrive.
2. Go to the directory location you specified when you saved the file.
3. Double-click the .exe file you downloaded. The WinZip Self-Extractor dialog box appears.
4. Specify the location to save the unzipped files to and click Unzip. A message appears, stating that the files unzipped successfully.
5. Click OK.
6. Click Close.
Viewing the Help File
1. Start your browser and open the index.htm file in the directory containing the unzipped files.
2. Click the Start button on the Windows desktop, point to Programs, and then click Windows Explorer.
3. Navigate to the directory in which you saved the Help file.
4. Double-click the file.
Compiled HTML Help files (files with an extension of .chm) require Microsoft Internet Explorer 4.0 or later.

Back to Contents Page

Back to Contents Page
Drivers and Utilities for Microsoft®Windows®2000:Dell™Inspiron™
5000 Series

Overview
This section explains how to install or reinstall Dell-provided device drivers and utilities on your Dell computer running the Microsoft Windows 2000 operating system.
You may need to use this information under the following conditions:
lYou are reinstalling the Windows operating system.
lYou are reinstalling the Dell-provided drivers and utilities.
lYou installed a new primary hard-disk drive and you must install all of the system software.

Installing Drivers and Utilities for Windows
To install the system software, you need the following items:
lSystem Software CD
lCD-ROM or DVD-ROM drive installed in the media bay of the computer

System Software CD
The following figure shows the directory structure of the System Software CD for Inspiron 5000 series computers. The CD is bootable. The R:\> prompt appears
when you exit to MS-DOS®from the Diagnostics menu.
Overview
Installing the Touch Pad Driver
System Software CD
Installing the Software DVD Decoder Driver (Optional)
Installing Windows 2000
Installing the Intel SpeedStep Utility (Optional)
Installing the Audio Driver
Updating Drivers and Utilities
Installing the Video Driver
NOTE: The drivers on the System Software CD are the same drivers that Dell installed on your hard-disk drive before shipping the
computer to you. To download the latest versions of these drivers, visit the Dell support Web site at http://support.dell.com.


Installing Windows 2000
Perform the following steps to install the Windows 2000 operating system on the hard-disk drive before you install any device drivers or utilities:
1. Insert the Dell Products Recovery CD into the CD-ROM or DVD-ROM drive.
2. Shut down the computer.
3. Turn on the computer.
4. Press any key when the Press any key to boot from CD message appears on the screen.
5. When the Windows 2000 Setup window appears, ensure that the To setup Win2000 now, press ENTER option is highlighted. Then press <Enter>.
6. Read the information in the License Agreement window, and then press <F8> to continue.
7. When the Windows 2000 Professional Setup window appears, press the arrow keys to select the Windows 2000 partition option that you want. To continue,
press the key specified in the partition option that you chose.
8. When the Windows 2000 Professional Setup window reappears, press the arrow keys to select the type of filing system that you want Windows 2000 to use,
and then press <Enter>.
9. Press <Enter> again to restart your computer.
10. Click Next when the Welcome to the Windows 2000 Setup Wizard window appears.
11. When the Regional Settings window appears, select the settings for your locale, and then click Next.
12. Enter your name and organization in the Personalize Your Software window, and then click Next.
13. When prompted, enter the Windows product key, which is printed on the Microsoft label on your computer. Then click Next.
14. When the Computer Name and Administrator Password window appears, enter a name for your computer and a password, if desired. Then click Next.
15. Enter the date and time in the Date and Time Settings window, and then click Next.
Windows 2000 now begins to install its components and configure the computer.
17. When the Completing the Windows 2000 Setup Wizard window appears, remove the CD from the drive, and then click Finish. The computer automatically
restarts.
Installing the Audio Driver

The audio driver allows you to customize the sound features of your computer.
1. Save and close any open files, and exit any open application programs.
2. Insert the System Software CD into the CD-ROM or DVD-ROM drive.
3. Click the Start button, and then click Run.
4. In the Run dialog box, type x:\win2000\audio\setup.exe, where xis the CD-ROM or DVD-ROM drive letter.
The CD-ROM or DVD-ROM drive letter is usually D.
5. Click OK.
6. In the Welcome window, click Next>.
An information dialog box appears, stating that the audio driver is installed on your computer.
7. Click OK.
8. When prompted, ensure that Yes, I want to restart my computer now is selected, and then click Finish.
The audio drivers are installed, and the installation is complete.

Installing the Video Driver
The video driver controls video resolution and color palette.
1. Save and close any open files, and exit any open application programs.
2. Insert the System Software CD into the CD-ROM or DVD-ROM drive.
3. Click the Start button, and then click Run.
4. In the Run dialog box, type x:\win2000\video\setup.exe, where xis the CD-ROM or DVD-ROM drive letter.
The CD-ROM or DVD-ROM drive letter is usually D.
5. In the Setup Complete window, ensure that Yes, I want to restart my computer now is selected, and then click Finish.
The computer restarts automatically.

Installing the Touch Pad Driver
The touch pad driver controls touch pad and mouse functions.
1. Save and close any open files, and exit any open application programs.
2. Insert the System Software CD into the CD-ROM or DVD-ROM drive.
NOTE: If the computer is set to boot from the CD-ROM or DVD-ROM drive before the hard-disk drive, remove the System
Software CD before the computer restarts so that the computer does not boot from the CD. For information on changing the boot
sequence, see "System Setup Program."
NOTE: If you need to use extended video modes, check the documentation that accompanied the application program to determine
if the driver is provided. If it is not, contact the software manufacturer for the necessary driver.
NOTES: If the computer is set to boot from the CD-ROM or DVD-ROM drive before the hard-disk drive, remove the System
Software CD before the computer restarts so that the computer does not boot from the CD. For information on changing the boot
sequence, see "System Setup Program."
After the computer restarts, you can change the video resolution.
NOTE: When you are prompted to select a directory, Dell recommends using the default directory settings.

3. Click the Start button, and then click Run.
4. In the Run dialog box, type x:\win2000\touchpad\english\setup.exe, where xis the CD-ROM or DVD-ROM drive letter.
If you are using a Japanese-language version of Windows, type x:\win2000\touchpad\japanese\setup.exe, where xis the CD-ROM or
DVD-ROM drive letter.
The CD-ROM or DVD-ROM drive letter is usually D.
5. Click Unzip.
6. Click OK.
7. In the Welcome window, click Next>.
8. At the Important Information window, click Next> twice.
9. At the Start Copying Files window, click Next>.
The touch pad driver is copied to your hard-disk drive.
10. At the Setup Complete window, be sure that the Yes, I want to restart my computer now button is selected, and then click Finish.
The Information about your Touch Pad window appears. If you do no want this window to appear each time you start the computer, remove the
check from the box that says Show this message the next time Windows starts. Then click Close.
Installing the Software DVD Decoder Driver (Optional)
The DVD decoder driver allows you to play DVD movies using your DVD-ROM drive on the computer.
1. Insert the Software DVD Decoder CD into the DVD-ROM drive.
The installation program starts automatically and the ChooseSetupLanguage window appears.
2. Select English, and then click OK.
The Welcome screen appears.
3. Click Next>.
The Software License Agreement window appears.
4. Click Yes.
The Choose Destination window appears.
5. Click Next>.
The files are copied to your disk and the setup Complete window appears.
6. Ensure that the Yes, I want to restart my computer now is selected, and then click Finish.
Your computer restarts and the deskop appears.
7. Insert your DVD into the DVD-ROM drive.
When you start your DVD for the first time, a Warning dialog box appears, explaining that DVD playback performance is dependent on your overall
system configuration and that some DVD titles are protected with an antitaping product provided by Macrovision, Inc.

NOTICE: Do not install the Japanese-language driver on a computer with a non-Japanese-language operating
system.
NOTE: If the computer is set to boot from the CD-ROM or DVD-ROM drive before the hard-disk drive, remove the System
Software CD before the computer restarts so that the computer does not boot from the CD. For information on changing the boot
sequence, refer to "System Setup Program."
NOTE: When you are prompted to select a directory, Dell recommends that you use the default directory setting.
NOTE: If the installation program does not start automatically, navigate to the Software DVD Decoder CD and click the Setup
icon.

8. Click OK.
Setting and Changing the DVD-ROM Drive Code
If you reinstall the DVD decoder software, you must set the DVD-ROM drive region code before you can play a movie. The region code can be reset if you relocate
to another region.
To reset the drive region code, perform the following steps:
1. Insert a DVD coded for the new region into the DVD-ROM drive.
A notification box appears, explaining that the disc belongs to another region and cannot be played. The notification also explains how to reset the region
setting.
2. Follow the instructions on the screen to change the region setting.

Installing the Intel®SpeedStep™Utility(Optional)
If your computer has a Mobile Intel Pentium III processor with Intel SpeedStep technology, you must reinstall the Intel SpeedStep utility after you install a new hard-
disk drive or reformat your hard-disk drive.
1. Save and close any open files, and exit any open application programs.
2. Insert the System Software CD into the CD-ROM or DVD-ROM drive.
3. Click the Start button, and then click Run.
4. In the Run dialog box, type x:\win2000\spd_stp\english\setup.exe, where xis the CD-ROM or DVD-ROM drive letter.
The CD-ROM or DVD-ROM drive letter is usually D.
5. Click OK.
6. In the Welcome window, click Next>.
7. At the Setup Complete window, ensure that the Yes, I want to restart my computer now is selected, and then click Finish.

Updating Drivers and Utilities
The Dell support Web site, http://support.dell.com, provides driver and utility updates, as well as technical assistance with questions about your computer. Dell
regularly tests and releases certified drivers and utilities for Inspiron computers. In addition, if you have access to a computer with a modem and/or fax capabilities, you
can access the Dell TechConnect bulletin board service (BBS), AutoTech service, and TechFax service. The Dell Web site, http://www.dell.com, also contains links
to these services.
NOTES: A variety of factors determine the DVD's playback performance. For more information, read the "Requirements" section
in the release notes that came with your DVD software.
The Macrovision product allows you to view you DVD on most televisions, but it distorts the video image if played back from a
videotape. The DVD decoder software provided with your system does not allow you to play back DVDs with graphics cards that
contain a TV-out connector.
If you have a TV-out connector on your computer and your DVD-ROM drive does not play your DVD title, make sure the TV-out
feature in your graphics card's software is turned off. Dell does not currently provide a TV
-out connector as an accessory item.
NOTICE: You should reset the region code only when absolutely necessary. You can reset the
region code up to four times.
NOTICE: Do not install the Intel SpeedStep utility unless your computer has a Mobile Intel Pentium®III processor
with Intel SpeedStep technology. To determine if your computer has a Mobile Intel Pentium III processor with Intel
SpeedStep technology, check for the Intel SpeedStep item in the Power menu of the system setup program. For
instructions on using the system setup program, see "System Setup Program."
NOTE: If the computer is set to boot from the CD-ROM or DVD-ROM drive before the hard-disk drive, remove the System
Software CD before the computer restarts so that the computer does not boot from the CD. For information on changing the boot
sequence, refer to "System Setup Program."

Back to Contents Page

Back to Contents Page
Drivers and Utilities for Microsoft®Windows®Me:Dell™Inspiron™
5000 Series

Overview
This section explains how to install or reinstall Dell-provided device drivers and utilities on your Dell computer running the Microsoft Windows Millennium Edition (Me)
operating system. You may need to use this information under the following conditions:
lYou are reinstalling the Windows operating system.
lYou are reinstalling the Dell-provided drivers and utilities.
lYou installed a new primary hard-disk drive and you must install all of the system software.
Installing Drivers and Utilities for Windows
To install the system software, you need the following items:
lSystem Software CD
lCD-ROM or DVD-ROM drive installed in the media bay of the computer

System Software CD
The following figure shows the directory structure of the System Software CD for Inspiron 5000 series computers. The CD is bootable. The R:\> prompt appears
when you exit to MS-DOS®from the Diagnostics menu.
Overview
Installing the Touch Pad Driver
System Software CD
Installing Softex BayManager
Installing Windows Me
Installing the Intel SpeedStep Utility (Optional)
Installing the Audio Driver
Updating Drivers and Utilities
Installing the Video Driver
NOTE: The drivers on the System Software CD are the same drivers that Dell installed on your hard-disk drive before shipping the
computer to you. To download the latest versions of these drivers, visit the Dell support Web site at http://support.dell.com.

Installing Windows Me
Perform the following steps to install the Windows Me operating system on the hard-disk drive before you install any device drivers or utilities:
1. Turn on the computer and enter the system setup program.
2. In the system setup program Boot menu, change the boot sequence so that the CD or DVD drive boots first. Then place the Dell Product Recovery CD in the
CD or DVD drive and close the drive tray.
3. Exit the system setup program.
4. At the Welcome window, click OK.
5. Double-click Refresh Windows OS.
6. Click OK.
7. Click OK again.
8. Remove the Dell Product Recovery CD from the CD or DVD drive, and click OK to restart your computer.
The Getting ready to run Windows for the first time window appears.
9. If the mouse tutorial starts, press <Esc> to exit, and then press <y>.
10. Click the regional setting closest to where you live, and click Next.
11. Click the graphic that matches your keyboard layout, and click Next.
12. In the User Information window, type your name and, if applicable, company name, and then click Next
The Name field must be completed; the Company Name field is optional.
The License Agreement window appears.
13. Click I accept the Agreement, and then click Next.
14. Type the Windows product key in the fields provided, and then click Next.
The product key is the bar code number found on the Microsoft Windows label, which is located on the computer.
15. When the Start Wizard appears, click Finish.
The Enter Windows Properties window appears. To continue without creating a Windows user name and password, click OK. Otherwise, type your user
name and password in the appropriate fields and then click OK.

16. If the Date/Time Properties window appears, adjust the date and time properties, click Apply, and then click OK.
Windows updates the system settings and restarts your computer.
17. If you created a Windows user name and password, type your password and click OK.
18. Reinstall the appropriate drivers.
19. Reenable your virus protection software.
Installing the Audio Driver
The audio driver allows you to customize the sound features of your computer.
1. Save and close any open files, and exit any open application programs.
2. Insert the System Software CD into the CD-ROM or DVD-ROM drive.
3. Click the Start button, and then click Run.
4. In the Run dialog box, type x:\winme\audio\setup.exe, where xis the CD-ROM or DVD-ROM drive letter.
The CD-ROM or DVD-ROM drive letter is usually D.
5. Click OK.
6. In the Welcome window, click Next>.
7. On the Main Menu, Upgrade Drivers is selected. Click Next>.
The audio files are copied to your hard-disk drive.
8. When prompted, ensure that Yes, I want to restart my computer now is selected, and then click Finish.
The New Hardware Found window appears, the software for the hardware is installed, and the installation is complete.

Installing the Video Driver
The video driver controls video resolution and color palette.
1. Save and close any open files, and exit any open application programs.
2. Insert the System Software CD into the CD-ROM or DVD-ROM drive.
3. Click the Start button, and then click Run.
4. In the Run dialog box, type x:\winme\video\setup.exe, where xis the CD-ROM or DVD-ROM drive letter.
The CD-ROM or DVD-ROM drive letter is usually D.
5. In the Setup Complete window, ensure that Yes, I want to restart my computer now is selected, and then click Finish.
The computer restarts automatically.
NOTICE: Make sure that you reinstall the Intel®Chip Set Update Utility driver before you reinstall any other drivers.
NOTE: If the computer is set to boot from the CD-ROM or DVD-ROM drive before the hard-disk drive, remove the System
Software CD before the computer restarts so that the computer does not boot from the CD. For information on changing the boot
sequence, see "System Setup Program."
NOTE: If you need to use extended video modes, check the documentation that accompanied the application program to determine
if the driver is provided. If it is not, contact the software manufacturer for the necessary driver.
NOTE: DirectX is installed automatically if your computer needs it.


Installing the Touch Pad Driver
The touch pad driver controls touch pad and mouse functions.
1. Save and close any open files, and exit any open application programs.
2. Insert the System Software CD into the CD-ROM or DVD-ROM drive.
3. Click the Start button, and then click Run.
4. In the Run dialog box, type x:\winme\touchpad\english\setup.exe, where xis the CD-ROM or DVD-ROM drive letter.
If you are using a Japanese-language version of Windows, type x:\winme\touchpad\japanese\setup.exe, where xis the CD-ROM or
DVD-ROM drive letter.
The CD-ROM or DVD-ROM drive letter is usually D.
5. Click OK.
6. In the Welcome window, click Next>.
7. At the Choose Destination Location window, click Next>.
8. At the Start Copying Files window, click Next>.
The touch pad drivers are copied to your hard-disk drive.
9. At the Setup Complete window, be sure that the Yes, I want to restart my computer now button is selected, and then click Finish.
The Information about your Touch Pad window appears. If you do no want this window to appear each time you start the computer, remove the check from
the box that says Show this message the next time Windows starts. Then click Close.

Installing Softex BayManager
Softex BayManager is a utility that makes it possible to swap media bay devices without turning off the computer.
To uninstall Softex BayManager, perform the following steps:
1. Save and close any open files, and exit any open application programs.
2. Click Start, select Settings, and then click Control Panel.
3. Double-click Add/Remove Programs.
4. Select Softex BayManager and click Add/Remove.
5. Follow the instructions on the screen to complete the uninstall process.
To install the Softex BayManager from the System Software CD, perform the following steps:
NOTES: If the computer is set to boot from the CD-ROM or DVD-ROM drive before the hard-disk drive, remove the System
Software CD before the computer restarts so that the computer does not boot from the CD. For information on changing the boot
sequence, see "System Setup Program."
After the computer restarts, you can change the video resolution.
NOTE: When you are prompted to select a directory, Dell recommends using the default directory settings.

NOTICE: Do not install the Japanese-language driver on a computer with a non-Japanese-language operating
system.
NOTE: If the computer is set to boot from the CD-ROM or DVD-ROM drive before the hard-disk drive, remove the System
Software CD before the computer restarts so that the computer does not boot from the CD. For information on changing the boot
sequence, see "System Setup Program."
NOTICE: You must uninstall Softex BayManager before you download and install a Softex BayManager software
upgrade from the Dell Support Web site File Library.

1. Insert the System Software CD into the CD-ROM or DVD-ROM drive.
2. Click the Start button, and then click Run.
3. In the Run dialog box, type x:\winme\baymgr\setup.exe, where xis the CD-ROM or DVD-ROM drive letter.
The CD-ROM or DVD-ROM drive letter is usually D.
4. Click OK.
5. In the Welcome window, click Next>.
6. At the Setup Complete window, ensure that the Yes, I want to restart my computer now is selected, and then click Finish.
Installing the Intel®SpeedStep™Utility(Optional)
If your computer has a Mobile Intel Pentium III processor with Intel SpeedStep technology, you must reinstall the Intel SpeedStep utility after you install a new hard-
disk drive or reformat your hard-disk drive.
1. Save and close any open files, and exit any open application programs.
2. Insert the System Software CD into the CD-ROM or DVD-ROM drive.
3. Click the Start button, and then click Run.
4. In the Run dialog box, type x:\winme\spd_stp\english\setup.exe, where xis the CD-ROM or DVD-ROM drive letter.
The CD-ROM or DVD-ROM drive letter is usually D.
5. Click OK.
6. In the Welcome window, click Next>.
7. At the Setup Complete window, ensure that the Yes, I want to restart my computer now is selected, and then click Finish.

Updating Drivers and Utilities
The Dell support Web site, http://support.dell.com, provides driver and utility updates, as well as technical assistance with questions about your computer. Dell
regularly tests and releases certified drivers and utilities for Inspiron computers. In addition, if you have access to a computer with a modem and/or fax capabilities, you
can access the Dell TechConnect bulletin board service (BBS), AutoTech service, and TechFax service. The Dell Web site, http://www.dell.com, also contains links
to these services.
Back to Contents Page
NOTE: If the computer is set to boot from the CD-ROM or DVD-ROM drive before the hard-disk drive, remove the System
Software CD before the computer restarts so that the computer does not boot from the CD. For information on changing the boot
sequence, see "System Setup Program."
NOTICE: Do not install the Intel SpeedStep utility unless your computer has a Mobile Intel Pentium®III processor
with Intel SpeedStep technology. To determine if your computer has a Mobile Intel Pentium III processor with Intel
SpeedStep technology, check for the Intel SpeedStep item in the Power menu of the system setup program. For
instructions on using the system setup program, see "System Setup Program."
NOTE: If the driver is not in English, substitute the appropriate language.

Back to Contents Page
Drivers and Utilities for Microsoft®Windows®98:Dell™Inspiron™
5000 Series

Overview
This section explains how to install or reinstall Dell-provided device drivers and utilities on your Dell computer running the Microsoft Windows 98 Second Edition
operating system. You may need to use this information under the following conditions:
lYou are reinstalling the Windows operating system.
lYou are reinstalling the Dell-provided drivers and utilities.
lYou installed a new primary hard-disk drive and you must install all of the system software.

Installing Drivers and Utilities for Windows
To install the system software, you need the following items:
lSystem Software CD
lCD-ROM or DVD-ROM drive installed in the media bay of the computer
lMicrosoft Windows 98 Second Edition CD
lMicrosoft Boot Disk Windows 98 Series diskette

System Software CD
The following figure shows the directory structure of the System Software CD for Inspiron 5000 series computers. The CD is bootable. The R:\> prompt appears
when you exit to MS-DOS®from the Diagnostics menu.
Overview
Installing the Touch Pad Driver
System Software CD
Installing Softex BayManager
Installing Windows 98
Installing the Internal Modem Driver (Optional)
Recreating the Hibernate (Save-to-Disk Suspend) File
Installing the Software DVD Decoder Driver (Optional)
Installing the Audio Driver
Installing the Intel SpeedStep Utility (Optional)
Installing the Video Driver
Updating Drivers and Utilities
NOTES: Verify that Windows 98 is already installed on the hard-disk drive before you install any device drivers. To install Windows
98 Second Edition, see “Installing Windows 98."
The drivers on the System Software CD are the same drivers that Dell installed on your hard-disk drive before shipping the
computer to you. To download the latest versions of these drivers, visit the Dell support Web site at http://support.dell.com.


Installing Windows 98
Perform the following steps to install the Windows 98 operating system on the hard-disk drive before you install any device drivers or utilities:
1. Turn on the computer and enter the system setup program.
2. In the system setup program Boot menu, change the boot sequence so that the CD or DVD drive boots first. Then place the Dell Product Recovery CD in the
CD or DVD drive and close the drive tray.
3. Exit the system setup program.
4. At the Welcome window, click OK.
5. Double-click Refresh Windows OS.
6. Click OK.
7. Click OK again.
8. Remove the Dell Product Recovery CD from the CD or DVD drive, and click OK to restart your computer.
The Getting ready to run Windows for the first time window appears.
9. If the mouse tutorial starts, press <Esc> to exit and then press <y>.
10. Click the regional setting closest to where you live, and click Next.
11. Click the graphic that matches your keyboard layout, and click Next.
12. In the User Information window, type your name and, if applicable, company name, and then click Next.
The Name field must be completed; the Company Name field is optional.
The License Agreement window appears.
13. Click I accept the Agreement, and then click Next.
14. Type the Windows product key in the fields provided, and then click Next.
The product key is the bar code number found on the Microsoft Windows label, which is located on the computer.
15. When the Start Wizard appears, click Finish.

The Enter Windows Properties window appears. To continue without creating a Windows user name and password, click OK. Otherwise, type your user
name and password in the appropriate fields and then click OK.
16. If the Date/Time Properties window appears, adjust the date and time properties, click Apply, and then click OK.
Windows updates the system settings and restarts your computer.
17. If you created a Windows user name and password, type your password and click OK
18. Reinstall the appropriate drivers.
19. Reenable your virus protection software.

Recreating the Hibernate (Save-to-Disk Suspend) File
When the hibernate mode is activated, all system data is stored in the hibernate (save-to-disk suspend) file on your hard-disk drive. The hibernate file on your hard-
disk drive cannot be accessed by the Windows operating system or application programs.
You must recreate the hibernate file if you perform any of the following actions:
lDelete the hibernate file.
lInstall a new hard-disk drive.
lReformat your hard-disk drive.
lInstall additional memory.

Boot Your Computer With the System Software CD
1. Save and close any open files, exit any open application programs, and shut down the computer.
2. If the computer is docked, undock it.
For instructions, see the Port Replicator User’s Guide.
3. Turn on the computer.
4. Press <F2> when you see the Dell logo to access the system setup program.
5. Press the right-arrow key to highlight Boot.
6. Press the down-arrow key to highlight a device, and then press <F5> to move the device down the list or press <F6> to move the device up the list. Select the
following boot sequence:
lFloppy
lCD ROM/DVD
lInternal Hard Drive
7. Insert the System Software CD into the CD-ROM or DVD-ROM drive.
8. Press <F10> to save your changes and exit the system setup program.
9. When the Setup Confirmation screen appears, press <Enter> to confirm that you want to save the configuration changes and exit the system setup program.
The computer restarts automatically. The Dell Diagnostics begins automatically. After the diagnostic utility loads, the Diagnostics Menu appears.
NOTICE: Make sure that you reinstall the Intel®Chip Set Update Utility driver before you reinstall any other drivers.
NOTE: If you install additional memory, you must delete the hibernate file before you recreate the file.
Fully Test All Devices
Quickly Test All
Devices

10. Press the down-arrow key to select Exit to MS-DOS and then press <Enter>.
For instructions on deleting the hibernate file, see "Delete the Hibernate File."

Delete the Hibernate File
1. Boot your computer from the CD-ROM or DVD-ROM drive with the System Software CD in the CD-ROM or DVD-ROM drive.
For instructions, see "Boot Your Computer With the System Software CD."
2. At the R:\DIAGS prompt, type cd\ and then press <Enter>.
3. At the R:\ prompt, type cd\utility and press <Enter>.
4. Type phdisk /delete /file and press <Enter>.
5. Follow the instructions on your screen to delete the hibernate file.
The computer automatically restarts.
To create a new hibernate file immediately after deleting it, perform the following steps:
1. When the Diagnostics Menu appears, press the down-arrow key to select Exit to MS-DOS and then press <Enter>.
2. Complete steps 2 through 6 in the next section.

Create the Hibernate File
1. Boot your computer from the CD-ROM or DVD-ROM drive with the System Software CD in the CD-ROM or DVD-ROM drive.
For instructions, see "Boot Your Computer With the System Software CD."
2. At the R:\DIAGS prompt, type cd\ and then press <Enter>.
3. At the R:\ prompt, type cd\win98\utility and press <Enter>.
4. Type phdisk /create /file and press <Enter>.
The utility calculates the size of the file, in kilobytes, based on the amount of system memory in your computer, plus the amount of video memory in your
computer, plus 2 MB to handle additional system requirements.
5. Follow the instructions on your screen to create the hibernate file.
6. At the R: \Win98\UTILITY prompt, type phdisk /info and press <Enter>.
7. As soon as you see the Dell logo on the screen, remove the System Software CD from the CD-ROM or DVD-ROM drive.
Windows automatically starts. After you create the hibernate file, you must enable hibernate support.

Enable Hibernate Support
1. Click the Start button, point to Settings, and click Control Panel.
2. Double-click the Power Management icon.
3. Click the Hibernate tab.
Select Devices to
Test
Exit to MS-DOS
NOTE: You must type a space between phdisk and /delete and /file.
NOTE: You must type a space between phdisk and /create and /file.

4. Ensure that Enable hibernate support is selected and click Apply.
5. Click OK to close the Control Panel.

View the Hibernate File Information
1. Boot your computer from the CD-ROM or DVD-ROM drive with the System Software CD in the CD-ROM or DVD-ROM drive.
For instructions, see "Boot Your Computer With the System Software CD."
2. At the R:\DIAGS prompt, type cd\ and then press <Enter>.
3. At the R:\ prompt, type cd\utility and press <Enter>.
4. Type phdisk /info and press <Enter>.
The hibernate file information appears on the screen.
5. Remove the System Software CD from the CD-ROM or DVD-ROM drive.
6. To restart the computer and run Windows, press <Ctrl><Alt><Delete>.

Installing the Audio Driver
The audio driver allows you to customize the sound features of your computer.
1. Save and close any open files, and exit any open application programs.
2. Insert the System Software CD into the CD-ROM or DVD-ROM drive.
3. Click the Start button, and then click Run.
4. In the Run dialog box, type x:\audio\setup.exe, where xis the CD-ROM or DVD-ROM drive letter.
The CD-ROM or DVD-ROM drive letter is usually D.
5. Click OK.
6. In the Welcome window, click Next>.
7. On the Main Menu, Upgrade Drivers is selected. Click Next>.
The audio files are copied to your hard-disk drive.
8. When prompted, ensure that Yes, I want to restart my computer now is selected, and then click Finish.
The New Hardware Found window appears, the software for the hardware is installed, and the installation is complete.

Installing the Video Driver
The video driver controls video resolution and color palette.
1. Save and close any open files, and exit any open application programs.
NOTE: You must type a space between phdisk and /info.
NOTE: If the computer is set to boot from the CD-ROM or DVD-ROM drive before the hard-disk drive, remove the System
Software CD before the computer restarts so that the computer does not boot from the CD. For information on changing the boot
sequence, see "System Setup Program."
NOTE: If you need to use extended video modes, check the documentation that accompanied the application program to determine
if the driver is provided. If it is not, contact the software manufacturer for the necessary driver.