17
Unpacking Your Printer
1
Select a location for your printer.
CAUTION: The printer requires at least two people to lift it safely.
• Leave enough room to open the printer tray, covers, doors, and options. It is also important
to allow enough space around the printer for proper ventilation.
• Provide the proper environment:
• A firm, level surface.
• Away from the direct airflow of air conditioners, heaters, or ventilators.
• Away from sunlight, extreme humidity, or high fluctuations in temperature.
• A clean, dry, and dust free lowcation.
• Select a level, stable place with adequate space for air circulation. See "Setting up the
hardware".
• Do not set the machine close to the edge of your desk or table.
NOTE: Leave the printer in the box until you are ready to install it.
2
In addition to the
Dell 2355dn Laser MFP
, ensure that you have the following items in the
box. If there is a missing item, contact Dell:
Toner cartridge Power cordaSoftware and Documentation CDb
Quick Reference GuidecTelephone line cordaSetup diagram
Product Information Guide
Dell 2355dn MFP Quick Reference Guide
lenaProtarepO
Touch Screen
Front
Back
Quick ReferenceGuide
Quick ReferenceGuide
Front
1.LCD:Display.
2.StatusLED: Shows the status of your machine.
3.JobStatus button: Shows the jobs.
4.M/CSetup button: Leads you to the machine setup and advanced settings.
5Startbutton: Initiate operation.
6.Cancelbutton: Cancel displayed operation.
1.LCD:Display.
2.StatusLED: Shows the status of your machine.
3.JobStatus button: Shows the jobs.
4.M/CSetup button: Leads you to the machine setup and advanced settings.
5Startbutton: Initiate operation.
6.Cancelbutton: Cancel displayed operation.
1.LCD:Display.
2.StatusLED: Shows the status of your machine.
3.JobStatus button: Shows the jobs.
4.M/CSetup button: Leads you to the machine setup and advanced settings.
5Startbutton: Initiate operation.
6.Cancelbutton: Cancel displayed operation.
1.USBport
2.Lockingslot
3.Networkport
4.Optionaltray 2 cable
connector
5.Telephoneline socket (Line)
6.Extensiontelephone socket (EXT)
7.Reardoor
8.Powerreceptacle
9.Powerswitch
10.Expresservice code
11.Optionalmemory
12.Optionalwireless card
1.
Copy:Entersthe copy menu.
2.Fax:Enters the fax menu.
3.Scan: Enters the scan menu.
4.Setup:Enters the advanced settings.
5.None:You can set the option which is frequently uses on
mainscreen. Also you can change shortcut name as well.
6. : Shows the main screen.
7. : Enters the LCD brightness, theUSB memory,
language,and job status.
8. : Return to the upper menu.
9. :Scrollthrough available options.
10. : Start a job.
Front
Front
OperatorPanel OperatorPanel
TouchScreen Touch Screen
13
1
7
1
3
4
78
5
2
6
9
10
11
12
14
15
1.DADF
2.Documentwidth guides
3.Documentinput tray
4.Documentoutput tray
5.Operatorpanel
6.Outputtray (face down)
7.MPF(Multi purpose feeder)
8.Frontcover
9.Tray1
10.Optionaltray 2
11.USBmemory port
12.Paperoutput extension
13.Documentglass
14.Tonercartridge
15.Expresservice code
1.DADF
2.Documentwidth guides
3.Documentinput tray
4.Documentoutput tray
5.Operatorpanel
6.Outputtray (face down)
7.MPF(Multi purpose feeder)
8.Frontcover
9.Tray1
10.Optionaltray 2
11.USBmemory port
12.Paperoutput extension
13.Documentglass
14.Tonercartridge
15.Expresservice code
1.DADF
2.Documentwidth guides
3.Documentinput tray
4.Documentoutput tray
5.Operatorpanel
6.Outputtray (face down)
7.MPF(Multi purpose feeder)
8.Frontcover
9.Tray1
10.Optionaltray 2
11.USBmemory port
12.Paperoutput extension
13.Documentglass
14.Tonercartridge
15.Expresservice code
Back
Back
1
2
3
5
4
6
8
9
10
11
12
1.USBport
2.Lockingslot
3.Networkport
4.Optionaltray 2 cable
connector
5.Telephoneline socket (Line)
6.Extensiontelephone socket (EXT)
7.Reardoor
8.Powerreceptacle
9.Powerswitch
10.Expresservice code
11.Optionalmemory
12.Optionalwireless card
1.USBport
2.Lockingslot
3.Networkport
4.Optionaltray 2 cable
connector
5.Telephoneline socket (Line)
6.Extensiontelephone socket (EXT)
7.Reardoor
8.Powerreceptacle
9.Powerswitch
10.Expresservice code
11.Optionalmemory
12.Optionalwireless card
1.
Copy:Entersthe copy menu.
2.Fax:Enters the fax menu.
3.Scan: Enters the scan menu.
4.Setup:Enters the advanced settings.
5.None:You can set the option which is frequently uses on
mainscreen. Also you can change shortcut name as well.
6. : Shows the main screen.
7. : Enters the LCD brightness, theUSB memory,
language,and job status.
8. : Return to the upper menu.
9. :Scrollthrough available options.
10. : Start a job.
1.
Copy:Entersthe copy menu.
2.Fax:Enters the fax menu.
3.Scan: Enters the scan menu.
4.Setup:Enters the advanced settings.
5.None:You can set the option which is frequently uses on
mainscreen. Also you can change shortcut name as well.
6. : Shows the main screen.
7. : Enters the LCD brightness, theUSB memory,
language,and job status.
8. : Return to the upper menu.
9. :Scrollthrough available options.
10. : Start a job.