Delta Children Disney PIXAR Cars BB86609CR User manual

Stickers
•Please apply all stickers on individual parts before assembly unless otherwise specified
•DO NOT apply stickers to tires, steering wheel, or spoiler until AFTER
the toddler bed is fully assembled
• For best results, place individual parts on a flat surface before applying stickers.
A12 B12
3

1 Right Side Panel A1 A2 A3 A4 A5
A8
A
A6
CA9 A10 A11 A12 CA7
Align A11 sticker to A10 along dotted line
Align A10 sticker to A9 along dotted line
A11
A10
A9
Step 3: Apply A11
Step 2: Apply A10
Step 1: Apply A9 Overlap Overlap
A9 A10
Dotted line located here Dotted line located here 4

2 Left Side Panel
B5 B4 B3 B2 B1
B8
B
B6
B7 CB12 B11 B10 B9 C
Align B11 sticker to B10 along dotted line
B11
Align B10 sticker to B9 along dotted line
Step 3: Apply B11
A10 B10
B9
Step 2: Apply B10
Overlap Overlap Step 1: Apply B9
B10 B9
Dotted line located here Dotted line located here 5

3A
3B
• Apply D2 sticker beginning here.
K
D1
Overlap
D2
4
5
N
D
E1
E2
6
E3
E4
•Match cut-out in
headlight sticker to
holes on front bumper
D
6

1A
C
1B
A
4 x 3/4”
1C• APPLY STICKERS
C
M
7

2 2B
B
4 x 3/4” C
2C• APPLY STICKERS
C
M
8

3
• Turn both side panels and front bumper
upside down to begin assembly
D
A
B
4 x 3/4”
4A • Fold cover upwards into fully locked position
3A
4B
• Turn bed over
• If assembling twin bed ONLY, skip to step 10 9

Follow steps 5A through 9 for toddler bed
5A 5B
E
2 x 3/4” F
6A
6B
6C
• APPLY STICKERS
IJK
G
L
1 x 1.0” DIA.
G
1 x 1/2”
10

• Align center wall with groove on left and right side
7B
7Apanels. Slide down into a fully locked position.
E
2 x 1/2” DIA.
2 x 3/4”
7C• Fold flap downward towards side panels 7D • Screw down flap onto side panels
11

8
BACK VIEW
I
H
1. Insert back panel latch hooks
into both left/right side panel grooves
2. Slide downward into a fully 1locked position
2
J
10
9
•Optional mattress support board assembly
Dimensions: 53.65”(L) x 30.5”(W) x 0.50” THICK
11
2 x 1.0”
• If only assembling twin bed, skip to 17A 12

12
12A
K
• Push windshield downward into groove on right
side panel into a fully locked position.
13 14
L
• Align hood tabs with holes
on left and right side panels. 15 Push into a fully
locked position.
M
4 x 3/4”
13

16 17A
N O
17B
2 x 1.0” DIA.
2 x 3/4”
14

17C • APPLY “N” STICKER AFTER SPOILER • APPLY “O” STICKER AFTER SPOILER IS
IS FULLY ASSEMBLED FULLY ASSEMBLED
O
N
O
2.50” (approx.) Apply sticker here
Align Osticker on Nalong dotted line
Overlap
O
N
Dotted line located here
17D
B13 A13
15

Twin Conversion
1
•Lift off center hood
•Unscrew left and right hood panels
3
• Please keep and store all loose screws in a
safe place when converting toddler bed to twin bed. All
loose screws will be used to assemble the toy box.
6 x 3/4” 2 x 1/2” DIA.
• To remove windshield,
pull upward on right side
while pushing side panel
outward to unlock.
2
17

45
13
Twin Bed
• Remove mattress and left/right mattress frames
• Works with standard boxspring and twin mattress
18

Toy Box
1• APPLY STICKERS
2
F3 HF4
P
R
• APPLY STICKERS
G
Q
3
4
R
Q
PS
2 x 1.0”
19

56• Fold flap downward towards side panels.
2 x 1.0”
• Align center wall with grooves on left and right side
panels of toy box. Slide down into a fully locked position.
7
2 x 3/4”
2 x 1/2” DIA.
• Screw down flap
onto side panels