Delta Electronics SMT Power Inductor MPO13X Installation instructions

SMT Power Inductor (MOLDING TYPE)
MPO13X Type
Mechanical Dimension:
DELTA ELECTRONICS, INC.
(TAOYUAN PLANT CPBG) 252, SAN YING ROAD, KUEISAN INDUSTRIAL ZONE, TAOYUAN SHIEN, 333, TAIWAN, R.O.C.
TEL: [phone]; FAX: [phone]
http://www.deltaww.com
145
UNIT : mm/inch
A =14.00 / 0.55Max.
B = 12.90/ 0.508 Max.
7.8/0.307
14.20/0.560
5.20/0.205
B
A
2.54 / 0.100
DC
1. Isat is the DC current which cause the inductance drop approximately 30% of its nominal inductance without current.
O
2. Ir is the DC current which cause the surface temperature of the part increase approximately than 40 C.
RECOMMENDED PAD PATTERNS
Applications
Features
Notebook/Desktop/Server/Video Card applications.
High current POL converters.
Low profile, high current power supplies.
Battery powered devices.
Ideal for power source circuits, DC-DC converter.
DC-AC inverters inductor application.
RoHS compliant.
Low profile, high current SMD type.
Frequency range up to 1MHz.
Lowest DCR/ H, in this package size.
Low buzz noise due to its gap-less structure.
Electrical Characteristics: At 25 : 100KHz, 0.25V
oC
PART NO.
(uH)
Lo
1
DCR
(m ) TYP.
DCR
(m ) MAX.
1
Isat
(Adc)
2
Ir
(Adc)
Dimension "D"
mm / inch
MAX
Dimension "C"
mm / inch
0.5 / 0.02
MPO135-R68 0.68 20% 1.5 1.7 54 34 3.5 / 0.138 5.0 / 0.197
MPO135-R82 0.82 20% 2.0 2.3 53 31 3.5 / 0.138 5.0 / 0.197
MPO135-1R0 1.00 20% 2.1 2.5 50 30 3.5 / 0.138 5.0 / 0.197
MPO135-1R5 1.50 20% 3.4 4.1 48 23 3.0 / 0.118 5.0 / 0.197
MPO135-1R8 1.80 20% 3.6 4.5 38 20 3.0 / 0.118 5.0 / 0.197
MPO135-2R2 2.20 20% 4.6 5.5 32 18 2.7 / 0.106 5.0 / 0.197