Delta PPM CT16 101 Instruction sheet

Quick Installation Guideline
Grid-tie Transformerless Solar Inverter
Current sensor for H5A_222
● This document briefly explains how to install a current sensor.
This document applies to H5A_222.
Caution
Make sure that the connector of the current sensor to be connected and the
cable for the current sensor are connected correctly.
Do not pull the cable strongly.
If the direction and location of the current sensor are wrong or the lock is
incomplete, accurate measurement will not be possible.
Also, if you drop or apply an impact, accurate measurement will not be possible.
The current sensor has polarity. Install the current sensor so that the power
company side is on the grid side and the indoor side is on the main earth leakage
breaker side.
1 1
Current sensor
（Φ16）
No Exterior QtyObject Model
PPM CT16_101
1. Accessories contents
2. External dimensions
10000mm
or
30000mm
150mm
L
31mm
29mm
44.5mm
30mm
150mm
18.5mm
Φ 16
3. Remove the function port
More H5A_222 details please scan QR-code for user manual.
2 1
Current sensor
cable 30m: PPM W2_230
10m: PPM W2_210
Digital input Power meter
Dry contact
* Screw torque required for
assembling: 8±2 kgf-cm
- https://mydeltasolar.deltaww.com/?p=product_manual

4. Connecting the current sensor
20201208
Connecting the current sensor in the following steps
(1) Attach a current sensor to the L cables of the main earth leakage circuit breaker.
(2) Clamp current sensor on power line and make sure that the direction is correct.
L N
(3) Connect the current sensor cable to the current sensor connection terminal
of the measurement unit.
(4) Connect the current sensor cable to the CT sensor connection terminal on
the function port.
current
sensor
cable
current
sensor
DELTA ELECTRONICS, INC.
39 Sec. 2 HuanDong Road,
ShanHua Dist., Tainan City 74144,
Taiwan, R.O.C
TEL [phone]
FAX [phone]
http://www.deltaww.com