Delta Upright Stroller User manual

www.deltachildrensproducts.com
08V0
Upright Stroller
Owner’s Manual

08V0
STEP 8 FOLDING STROLLER
When closing stroller, the seat should be in an upright
position. Grip onto the stroller handle, placing thumb
on the red button (fig.1). Shift button to the right and
at the same time, rotate hand upward
(fig. 2). This will allow the stroller to fold in an upright
position (fig.3).
Lock storage latch
on side of stroller.
fig. 1
fig. 2
fig. 3
Avoid serious injury from falling or sliding out. Always use seat belt. Your
child’s safety depends on you. Proper stroller use cannot be assured unless you
follow these instructions. DO NOT USE STROLLER UNTIL YOU READ AND
UNDERSTAND THESE INSTRUCTIONS.
IMPORTANT SAFETY INFORMATION
• NEVER LEAVE YOUR CHILD UNATTENDED WHILE IN STROLLER.
Accidents can happen quickly while your back is turned. You must always keep
your child in view while your child is in the stroller, even when sleeping. Your
child may become tangled in straps or pads and suffocate.
• Always use restaint system to keep child from standing up or falling out of
the stroller.
• Always balance the weight of the stroller evenly. To prevent the stroller from
becoming unstable or tipping:
• Do not allow children to play with or hang onto the stroller.
• Always lock the stroller open before allowing your child in or near the stroller.
This prevents injuries caused by the stroller collapsing.
• Only use this stroller with children who weigh less than 35lbs. (15.88kgs).
Use by larger children may damage the stroller, or cause a hazardous unstable
condition to exist.
• Always set the wheel brakes when stroller is not moving, especially on an
incline. This prevents the stroller from rolling away.
• Never use this stroller on stairways or escalators.
• This is not an exercise stroller!
Do not use this product while runing, jogging, in-line skating or participating in
other athletic activities.
• Only use this stroller if child can hold head up unassisted.
• Maximum weight capacity of storage basket is 3 lbs. Placing excessive
weight in the stroller bag or addidng other package carrying accessories may
cause a hazardous unstable condition.
Care and maintenance
• To clean, use only a damp cloth or sponge. Wipe plastic parts with a damp
cloth using mild soap.
• To keep your stroller running smoothly and avoid squeaking wheels use a
silicone or graphite based lubricant.
• When storing stroller, never stack other items on top of it. This may damage
the stroller.
• Check your stroller for loose screws, worn parts, torn material or stitching on
a regular basis. Repair or replace parts as needed.
• Discontinue use of the stroller should it malfunction or become damaged.
Please contact our customer service department for repair or to obtain
replacement parts.

ASSEMBLY
Check that you have all the parts shown before assembling your product. If any parts
are missing, please call customer service.
Pull stroller
out of the box
Lock unhook
storage latch
Parent Tray
Child Tray
Canopy
Back Wheel
Assembly
Front Wheels
(2)
Screws
(2)
Pull stroller apart,
and push downward
STEP 1
a
c
b
08V0
Remove stroller from the box and
clear away from plastic bag and
protective foams.
To open stroller, pull handle
upward toward you until you
hear a click.
Press the red button on each
side of the handle to adjust the
level of the handle.
STEP 1

08V0
STEP 2
To insert front wheels, align the wheel to
the front leg of the stroller and insert
wheel until you hear a click. Then pull
downward on wheel to check and make
sure wheels are securely fastened.
Repeat on the other side.
Turn the stroller upside down, align the
back wheel assembly to the back legs of
the stroller. Insert the wheel housing onto
the stroller legs until you hear a click.
Make sure the brake locks are facing
towards adjustable handles.
Snap parent tray
onto the frame
(see fig.4). Pull
upward to make
sure is secured
in place.
INDIVIDUAL FRONT WHEELS &
BACK WHEEL ASSEMBLY
STEP 3 INSERTING CANOPY & PARENT TRAY
fig. 1
fig. 2
fig. 3
fig. 4
Inside snap
Insert canopy support wire into the
opening slots on each side of the
stroller (see fig.1). Once inserted
rotate back into position.
Screw canopy wire support onto
frame to secure the canopy
(see fig.3). Repeat on the other
side. Locate on the canopy 4
hook and loops to secure
canopy onto the stroller.
Insert middle canopy wire
supports under the adjustable handle
housing (see fig.2).

08V0
STEP 4 INSERTING CHILD TRAY
STEP 5 BACK SEAT RECLINING
STEP 6 ATTACHING CAR SEAT
Flip the child tray upside down and
align the snap and lock button to the
side of the tray tube as shown on fig. 1.
Insert the tray onto the tray support
tube until you hear a click.
Once the child tray is securely inserted
and fastened onto the tray tube, rotate the
child tray into a locked position (shown in
fig.2). To open, press the button lock and
rotate tray upward.
Press button on cord housing and pull away to recline
seat, as shown in fig. 1.
To return to an upright position, hold cord loop while
moving cord housing towards the backseat.
Final step to secure car seat onto
the stroller, turn and lock red
latches (fig.2). Check that car seat
is securely attached by pulling up
on the car seat handle. To remove,
undo latches and unlock car seat
from childtray.
To use the car seat feature, first lock back wheels
and recline the back seat to its lowest point and fold
canopy. Align car seat as shown in fig.1. Lower the
car seat feet first, then lower head part until it is
hooked onto the child tray and clicks.
fig. 1
fig. 1
fig. 1
fig. 2
(car seat attached and locked
to child tray)
car seat
front locks
fig. 2
To use the car seat feature, lock back
wheels and recline the back seat to its
lowest point and fold canopy closed. Align
car seat as shown in fig.1. Angle feet first,
while lowering car seat
into a locked position
on the child tray.

08V0
STEP 6B ATTACHING EVENFLO©CAR SEAT
Final step to secure car seat onto the stroller, wrap elastic webbing cord around
are seat hook (fig.2). Secure webbing with the hook and loop. Check that car
seat is securely attached by pulling up on the car seat handle. To remove, undo
latches and unlock car seat from childtray.
To use the car seat feature, first lock back wheels
and recline the back seat to its lowest point and fold
canopy. Align car seat as shown in fig.1. Lower the
car seat feet first, then lower head part until it is
hooked onto the child tray and clicks.
fig. 1
fig. 2
To use the EVENFLO© car seat feature, lock back
wheels and recline the back seat to its lowest point
and fold canopy close. Align car seat as shown in
fig.1. Angle feet firts, while lowering car seat into a
locked position on the
child tray.

08V0
STEP 8 FOLDING STROLLER
When closing stroller, the seat should be in an upright
position. Grip onto the stroller handle, placing thumb
on the red button (fig.1). Shift button to the right and
at the same time, rotate hand upward
(fig. 2). This will allow the stroller to fold in an upright
position (fig.3).
Lock storage latch
on side of stroller.
fig. 1
fig. 2
fig. 3
STEP 7 TO SECURE BABY
Pull strap to
adjust size to
best fit your child.
Place child in the stroller
seat and bring the seat
belt around child’s waist.
Place the crotch strap
between the child’s leg.
To fasten seat belt buckles
snap buckles together.
Be sure both buckles are
fastened to secure child safety.
To release seat belt buckles -
press center tab and pull apart.