Deltech Fitness DF1700 User manual

ASSEMBLY INSTRUCTIONS FOR THE
DF1700 FIXED OLYMPIC BENCH
*NOTE IF YOU ARE MISSING HARDWARE OR HAVE ANY FIT UP PROBLEMS PLEASE CONTACT DELTECH FITNESS TOLL FREE [phone]
FOR YOUR SAFETY READ ALL INSTRUCTIONS CAREFULLY
[phone]

BOX CONTENTS
*NOTE IF YOU ARE MISSING HARDWARE OR HAVE ANY FIT UP PROBLEMS PLEASE CONTACT DELTECH FITNESS TOLL FREE [phone]
BACKREST
QTY 1
A
WEIGHT FRAME
QTY 1
B
MAIN FRAME
QTY 1
C
WEIGHT HOLDER
QTY 2
D
HARDWARE
QTY 1
INSTRUCTIONS

K
I
H
G
E
HARDWARE
M12 WASHER
QTY 8
J
M12 x 76MM BOLT
QTY 4 M10 x 25MM BOLT
QTY 6
2” x 3” CAP
QTY 4
F
KNOB
QTY 2 REDUCER
QTY 2
M12 LOCKNUT
QTY 4
L
M10 WASHER
QTY 6
FACTORY INSTALLED

INSERT WEIGHT HOLDERS (D) INTO WEIGHT FRAME (B). ADJUST HEIGHT OF
WEIGHT HOLDERS (D) WITH PULL-PINS. INSTALL KNOBS (E) AND TIGHTEN TO
LOCK WEIGHT HOLDERS IN PLACE.
INSTALL 2” x 3” CAPS (F) INTO WEIGHT FRAME. IF NECESSARY, TAP IN WITH RUB-
BER MALLET.
*NOTE IF YOU ARE MISSING HARDWARE OR HAVE ANY FIT UP PROBLEMS PLEASE CONTACT DELTECH FITNESS TOLL FREE [phone]
TOOLS REQUIRED:
METRIC WRENCHES OR SOCKET SET
D
D
E
E
B
F
F
WEIGHT FRAME ASSEMBLY

INSTALL MAIN FRAME (C) TO WEIGHT FRAME ASSEMBLY USING M12 x 75MM
BOLTS (H), M12 WASHERS (J), AND M12 LOCKNUTS (L).
C
HJ
JL
MAIN FRAME ASSEMBLY