Deltech Fitness DF8000 User manual

*NOTE IF YOU ARE MISSING HARDWARE OR HAVE ANY FIT UP PROBLEMS PLEASE CONTACT DELTECH FITNESS TOLL FREE [phone]
FOR YOUR SAFETY READ ALL INSTRUCTIONS CAREFULLY
[phone]
ASSEMBLY INSTRUCTIONS FOR THE
DF8000 FLAT BENCH

*NOTE IF YOU ARE MISSING HARDWARE OR HAVE ANY FIT UP PROBLEMS PLEASE CONTACT DELTECH FITNESS TOLL FREE [phone]
FOR YOUR SAFETY READ ALL INSTRUCTIONS CAREFULLY
BOX CONTENTS
BACKREST
SUPPORT
QTY 1
C
BACKREST
QTY 1
D
HARDWARE
RUBBER SHOE
QTY 4
ESQUARE CAP
QTY 2
F
M12 x 70MM BOLT
QTY 8
GM10 x 25MM BOLT
QTY 6
H
LEG
QTY 2
AFOOT
QTY 2
B
M12 LOCKNUT
QTY 8
IM12 WASHER
QTY 16
J
M10 WASHER
QTY 6
K

ASSEMBLE THE FOOT (B) TO THE LEG (A) USING M12 x 70MM BOLTS (G), M12 WASHERS (J),
AND M12 NUTS (I). REPEAT FOR 2ND LEG ASSEMBLY.
DO NOT TIGHTEN NUTS AT THIS TIME.
LEG ASSEMBLY
TOOLS REQUIRED:
METRIC WRENCHES OR SOCKET SET
Some components may be pre-installed
from the factory
G
J
A
J
I
B

FRAME ASSEMBLY
ASSEMBLE EACH LEG ASSEMBLY TO THE BACKREST SUPPORT (C) USING M12 x 70MM
BOLTS (G), M12 WASHERS (J), AND M12 NUTS (I). TIGHTEN NUTS SECURELY.
INSTALL THE SQUARE CAPS (F) INTO EACH END OF THE BACKREST SUPPORT (C).
INSTALL RUBBER SHOES (E) ONTO THE FEET OF THE LEG ASSEMBLIES.
E
F
G
J
J
I
C

BACKREST ASSEMBLY
D
K
H
ASSEMBLE THE BACKREST (D) TO THE FRAME ASSEMBLY USING THE M10 x 25MM BOLTS
(H), AND M10 WASHERS (K).

FINALASSEMBLY
THE FINAL STEP IS TO FIND A FLAT SURFACE TO SET THE BENCH ON. SIT ON
THE BENCH TO MAKE SURE ALL FOUR SHOES ARE EVENLYTOUCHING THE
FLOOR. TIGHTEN THE NUTS SECURING THE FEET TO THE LEGS.

WARNING: THE USER OF THIS WEIGHT EQUIPMENT ASSUMES THE POSSIBILITY OF INJURY BY
EXERCISING ON THIS EQUIPMENT. THE RISK OF INJURY CAN BE REDUCED BY ALWAYS FOLLOWING
THESE SIMPLE RULES:
1) BEFORE BEGINNING ANY EXERCISE PROGRAM, CONSULT YOUR DOCTOR FOR A COMPLETE PHYSICAL
EXAMINATION AND SUGGESTED EXERCISE PROGRAM SPECIFIC FOR YOU.
2) STRETCH BEFORE AND AFTER THE EXERCISE PROGRAM. PROPER STRETCHING WILL PREPARE YOUR
JOINTS AND MUSCLES FOR EXERCISE AND HELP AVOID INJURIES.
3) IF AT ANY TIME YOU SHOULD FEEL FAINT OR DIZZY, NAUSEOUS OR EXPERIENCE ANY OTHER
ABNORMAL SYMPTOMS OR DISCOMFORT, DISCONTINUE USE AND CONSULT YOUR DOCTOR.
4) DO NOT USE THIS EQUIPMENT WITHOUT QUALIFIED SUPERVISION AND PROPER TRAINING. NEVER
WORK OUT ALONE- ALWAYS HAVE A PARTNER.
5) SECURELY TIGHTEN ALL BOLTS AND REGULARLY CHECK TO ENSURE ALL BOLTS HAVE NOT
LOOSENED.
6) WEAR GOOD RUBBER SOLE SHOES ONLY. DO NOT USE BARE FOOTED OR WITH SOCKS ONLY.
7) DO NOT WEAR LOOSE CLOTHES SUCH AS ROBES, GOWNS, PANTS, LONG SHIRTS OR JEWELRY WHICH
COULD BECOME ENTANGLED IN MOVING PARTS.
8) DO NOT STAND OR KNEEL ON SEAT. ALWAYS SIT OR LAY SQUARELY CENTERED.
9) KEEP HEAD, LIMBS AND BODY PARTS CLEAR OF MOVING PARTS AND WEIGHT PLATES.
10) CHILDREN SHOULD NOT USE EXERCISE EQUIPMENT WITHOUT SUPERVISION BECAUSE OF
POSSIBILITY OF INJURY FROM IMPROPER USAGE. THIS EQUIPMENT IS INTENDED FOR HOME USE ONLY.
11) REPLACEMENT OR WORN OR DEFECTIVE PARTS MUST BE WITH FACTORY AUTHORIZED PARTS. IF
OTHER THAN FACTORY AUTHORIZED PARTS OR ACCESSORIES ARE USED ALL WARRANTIES AND
LIABILITIES BECOME VOID.
SAFETY NOTICE

T-SHIRT ORDER FORM
DELTECH FITNESS T - SHIRT
SIZES AVAILABLE ARE M-XXL. THE COLOR
OF THE SHIRTS ARE WHITE. RED AND BLACK
LOGO. ONLY $12.99
DELTECH FITNESS MUSCLE SHIRT
SIZES AVAILABLE M-XXL THE COLOR
AVAILABLE IS BLACK. RED AND WHITE
LOGO. ONLY $12.99
SEND TO: DELTECH MANUFACTURING, INC.
3910 OAKLAWN DR.
LOUISVILLE, KY. 40219
ALL ORDERS SHIPPED UPS GROUND.
MAKE CHECK OR MONEY ORDER PAYABLE TO: DELTECH MANUFACTURING
KENTUCKY RESIDENTS ADD 6% SALES TAX. ALLOW 3 WEEKS FOR DELIVERY.
PRICE INCLUDES SHIPPING TO THE CONTIGUOUS UNITED STATES
OR ORDER ONLINE WITH A CREDIT CARD AT WWW.FITNESSDESTINATION.COM
SHIPPING INFORMATION:
QTY SIZE DESCRIPTION COLOR PRICE TOTAL
T - SHIRT WHITE $12.99 EA.
MUSCLE SHIRT BLACK $12.99 EA.
TOTAL