DeMore's Innovative Design Aerial Tool Bin ATB-1312 User manual

DeMore’s Innovative Design, Inc.
herewith guarantees the structural
integrity of the Aerial Tool Bin®
product, for one year and warrants it
against all manufacturer defects. This
Warranty is not applicable to any
damage caused by user or caused
by use other than its intended
purpose on aerial platforms.
Replacement subject to approval by
DeMore’s Innovative Design, Inc.
Upon approval, the Aerial Tool Bin®
will be replaced free-of-charge.
Call DeMore's Innovative Design, Inc.
for assistance at: 262-825-6784
Thank You for putting your trust
in the Tool Bin Man®and
choosing the Aerial Tool Bin®.
www.aerialtoolbin.com
1 Year Warranty
200414 ATB-1312 Insert Card
INSTRUCTIONS for Model ATB-1312
1) Remove the warranty and keep in a safe place for your records.
2) Read all warnings on bin and equipment where bin is used.
3) Remove the divider separators and all
components from the packaging on the
sides of the Aerial Tool Bin®.
4) Place the Dividers in the channel slots and
allow bottom of divider to insert weep holes.
5) Fasten the tool belt hanger bar with the
two small carriage bolts provided. Insert the
11/2" carriage bolt with wing nut to help retain
the tool pouch and Secure the bar.
6) Insert the two long Lift Rail safety locking
bolts, (provided) Prior to operating your aerial lift.
7) To insert the tool pouch, remove the carriage bolt from the tool belt hanger
bar and slide the tool pouch on. Re-insert the carriage bolt.
8) Load your larger tools in the Aerial Tool Bin®and you're ready to go to work.
DeMore's Innovative Design, Inc.
U.S. Patent No.: D675.824 Made in the USA
Divider
Separators
Tool Belt
Hanger Bar
2 long Lift Rail
safety locking
bolts
Lock Nuts
Flat
Washers
Small
Carriage
Bolts
11
/2"Carriage
Bolt & Wing
Nut

www.aerialtoolbin.com
• Read and follow all warnings on this label
prior to using the Aerial Tool Bin®.
• The Aerial Tool Bin is intended solely to
store tools & hardware associated with
work that typically occurs on aerial lifts.
• The Aerial Tool Bin was designed to
safely hold a maximum limit of tools &
hardware. See maximum weight limit
imprinted on the bin.
• Do not stand on or in the Aerial Tool Bin.
• Secure the area below when using the
Aerial Tool Bin and all of its components.
• Do not expose the Aerial Tool Bin to
temperatures exceeding 210oF.
• Read and follow all warning labels
located on the aerial lift itself prior to
using the Aerial Tool Bin.
• Do not use as a safety harness
anchoring point.
• This product complies with OSHA rule
1926.759(a) Securing loose items aloft.
• Thank you for putting your trust in the
Tool Bin Man®and choosing the Aerial
Tool Bin®…!
• Avant d'utiliser Aerial Tool Bin®, veuillez lire et
suivre toutes les mises en garde figurant sur
cette étiquette.
• L'Aerial Tool Bin est uniquement destiné à ranger
les outils et le matériel associés aux travaux qui
se déroulent habituellement sur les nacelles
élévatrices.
• L'Aerial Tool Bin a été conçu pour contenir en
toute sécurité un maximum d'outils et de
matériel. Faites référence à la limite de poids
maximum imprimée sur le bac.
• Ne vous tenez pas debout sur ou dans L'Aerial
Tool Bin.
• Sécurisez la zone ci-dessous lorsque vous
utilisez L'Aerial Tool Bin et tous ses composants.
• N'exposez pas L'Aerial Tool Bin à des
températures supérieures à 210oF.
• Lisez et suivez toutes les étiquettes
d'avertissement situées sur la nacelle élévatrice
elle-même avant d'utiliser L'Aerial Tool Bin.
• Ne pas utiliser comme point d'ancrage du harnais
de sécurité.
• Ce produit est conforme à la règle 1926.759(a) de
l'OSHA qui stipule que les articles en vrac doivent
être fixés en hauteur.
• Merci de faire confiance à Tool Bin Man®et
d'avoir choisi L'Aerial Tool Bin®... !
• Lea y siga todas las advertencias de esta
etiqueta antes de usar la Aerial Tool Bin®.
• La Aerial Tool Bin está destinada únicamente
a almacenar herramientas y hardware
asociados con el trabajo que normalmente se
produce en los elevadores aéreos.
• La Aerial Tool Bin fue diseñada para contener
de forma segura un límite máximo de
herramientas y hardware. Consulte el límite
máximo de peso impreso en el recipiente.
• No se pare sobre o en la Aerial Tool Bin.
• Asegure el área de abajo cuando utilice la
Aerial Tool Bin y todos sus componentes.
• No exponga la Aerial Tool Bin a temperaturas
superiores a 210oF.
• Lea y siga todas las etiquetas de advertencia
ubicadas en el elevador aéreo antes de
utilizar la Aerial Tool Bin.
• No utilizar como punto de anclaje del arnés
de seguridad.
• Este producto cumple con la regla
1926.759(a) de OSHA.
• ¡Gracias por depositar su confianza en Tool
Bin Man®y elegir el Aerial Tool Bin®...!
2004014 Copyright © 2020 DeMore's Innovative Design, Inc., Milwaukee, WI. All Rights Reserved.