Solo 220 User manual
Quick Start Guide
Solo 220 Detector Removal Tool
Detector Removal Instructions for AutroGuard®
Multicriteria Detectors
Important:
Before any work begins on the re detection system, all
necessary persons should be notied that the re system
is to undergo maintenance and that the system, or part of
it, will be temporarily out of service.
Ensure the control panel is in ‘Test Mode’ and/or take the
necessary precautions to prevent unwanted alarms.
Ensure that the same persons are informed once the
system is fully operable again.
detectortesters.com
AutroGuard® Multicriteria Detector removal/
replacement using the Solo 220 Removal Tool
A
1. Position
Position the removal tool over the detector
and apply gentle upward pressure to engage
the sprung arms.
V
2. Remove
Rotate the removal tool anti-clockwise whilst
applying gentle pressure to disengage the
detector from its base.
Note:
When replacing a detector rotate the removal tool
clockwise whilst applying pressure to engage the base
of the detector.
V
3. Lower
Carefully lower the removal tool keeping
it upright.
Removal of dust cover for AutroGuard®
Detectors with Solo 220 Dust Cover Adapter Tool
B
1. Attach & Position
Attach the Dust Cover Adapter to the Solo
220 Removal Tool and position the catches
above the sprung arms to partially engage
them.
V
3. Lower
2. Remove
Lower the removal tool to
detach the dust cover from
the detector.
Guide the removal tool onto
the detector and apply gentle
pressure to grip the dust
cover.
Application of dust cover for AutroGuard®
Detectors with Solo 220 Dust Cover Adapter Tool
C
1. Attach & Position
Attach the Dust Cover Adapter to the Solo
220 Removal Tool and position the catches
beneath the sprung arms.
3. Secure
2. Place
Guide the dust cover onto the
detector and apply gentle pressure
to ensure it is engaged securely.
Place the dust cover
onto the adapter.
V
401043-1
UK: No Climb Products Ltd
Welham Green, AL9 7JE, UK
Tel +44 (0)1707 282 760
EU: shift-consult Hubert Scherzinger
79108 Freiburg, DE
Tel +49 (0) 7665 91 21 74
Other Solo Tools manuals
