WilTec 61488 User manual

Operation Manual
Nail Filing Machine
61488
Illustration similar, may vary depending on model
Read and follow the operating instructions and safety information before using for the first time.
Technical changes reserved!
Due to further developments, illustrations, functioning steps and technical data can differ insignific-
antly.
Updating the documentation
If you have suggestions for improvement or have found any irregularities, please contact us.

The information contained in this document may alter at any time without previous notice. It is prohib-
ited to copy or spread any parts of this document in any way without prior written allowance. ll rights
reserved.
The WilTec Wildanger Technik GmbH cannot be held accountable for any possible mistakes in this
operating manual, nor in the diagrams and figures shown.
Even though, the WilTec Wildanger Technik GmbH has undergone biggest possible efforts to ensure
that the operating manual is complete, faultless and up to date, mistakes cannot be entirely avoided.
If you should find a mistake or wish to make a suggestion for improvement, we look forward to hearing
from you.
Send an e-mail to:
[email protected]
or use our contact form:
https://www.wiltec.de/contacts/
The most recent version of this manual in various languages can be found in our online shop via:
https://www.wiltec.de/docsearch
Our postal address is:
WilTec Wildanger Technik GmbH
Königsbenden 12
52249 Eschweiler
Germany
Do you wish to pick goods up? Our pick-up address is:
WilTec Wildanger Technik GmbH
Königsbenden 28
52249 Eschweiler
Germany
To shorten the waiting time and allow for a rapid on-site transaction, we ask you to call us previously
or placing your order via the webshop.
E-mail: [email protected]
Tel:[phone]
Fax: [phone]
To return orders for exchange, repair or for other purposes, please use the following address. tten-
tion! To allow for a smooth execution of your complaint or return, it is important to contact our cus-
tomer service team before returning the goods.
Returns Department
WilTec Wildanger Technik GmbH
Königsbenden 28
52249 Eschweiler
E-mail: [email protected]
Tel:[phone]
Fax: [phone]
© by WilTec Wildanger Technik GmbH Item 61488 Page 2
http://www.WilTec.de
http://www.aoyue.eu 02 2021-1
http://www.teichtip.de

Introduction
Thank you for purchasing this quality product. To ini ize the risk of injury we urge that our cli-
ents take so e basic safety precautions when using this device. Please read the operation in-
structions carefully and ake sure you have understood its content.
Keep these operation instructions safe.
Safety Notes
Follow the instructions precisely. Only to be used for foot and finger nails, its intended pur-
pose.
Keep out of the reach of children.
In case irritations or complaints occur, stop the application immediately.
Ensure not to smoothen the nails too much. Do not use this device on thin, weak, damaged or
infected nails. Keep the device away from water.
Never cover the device.
Never leave the device running when unsupervised.
The device is only disconnected from the electricity supply, when the mains adapter has been
unplugged from the socket.
Before connecting the device to the electricity supply, ensure that the voltage indicated on the
type label matches with the voltage of the mains supply.
Only use the device according to the purpose described in this operating manual.
The device is not designed to be used for commercial purposes.
Do not use spare parts which are not recommended by the manufacturer.
void contact with pointy or sharp objects. When using the device wrongfully, the warranty is
voided.
This device can be used by people, including children from the age of 8, with limited physical,
sensory or mental abilities or lack of experience and knowledge, if they are supervised or have
been instructed on how to use the device and understand the potential resulting dangers.
Children need to be supervised when using the device, to ensure that they do not play with the
device.
Cleaning and user maintenance are not allowed to be carried out by children when they are
unsupervised.
Installation and electrical connection
Connect the portable grinding head/hand piece to the “DC OUT” socket of the main panel.
Select a proper drill bit according to the requirements and attach it to the hand piece.
Turn the speed control knob to the left (towards minimum).
Connect to the power supply.
© by WilTec Wildanger Technik GmbH Item 61488 Page 3
http://www.WilTec.de
http://www.aoyue.eu 02 2021-1
http://www.teichtip.de

Operation
Switch the power switch (the left switch on the panel) to “I.” The indicator will be illuminated,
on and the machine is ready for operation.
Push the switch (the right switch on the panel) to “+” or “–.” “+” is for a clockwise direction and
- is for counter-clockwise direction.
Press the red switch on the hand piece to turn it on.
djust the speed control knob to control the rotation speed.
Press the switch to “O” to switch off the hand piece.
Press the power switch to “O” to turn off the machine.
Specifications
Main part (power supply and control)
Rated voltage range (V) 220–240
Rated frequency (Hz) 50
Rated power input (W) 12
Rated output voltage (V) 5–17 (DC)
Hand/ otor piece
Working voltage (V) 5–17 (DC)
Rated current ( ) 1
Rated speed (U/min) 0–20,000
Operation instructions
Do not change the turning directions too frequently. This will avoid damage to the hand piece.
Turn the speed control counter clockwise to decelerate the grinding head to the minimum be-
fore turning off and switch the main power source to “0.”
fter operation put the grinding head onto the top of the main panel.
While the grinding head is in operation, never pull out the 5 pin plug of the portable grinding
head.
For a long idle time please disconnect the power source.
ny unauthorized disassembling of the product is prohibited. In case of any breakdown please
contact the manufacturer or a qualified technician.
If the supply cable is damaged it must be replaced by the manufacturer or a qualified techni-
cian in order to avoid a hazard.
© by WilTec Wildanger Technik GmbH Item 61488 Page 4
http://www.WilTec.de
http://www.aoyue.eu 02 2021-1
http://www.teichtip.de

Disposal regulations
EU guidelines regarding the disposal of scrap electric appliances (WEEE, 2012/19/EU) were imple-
mented in the law related to electrical and electronic equipment and appliances.
ll WilTec electric devices that fall under the WEEE regulations are labelled with the crossed-out
wheeled waste bin logo. This logo indicates that this electric equipment must not be disposed with the
domestic waste.
The company WilTec Technik GmbH has been registrated in the German registry E R under the
WEEE-registration number DE45283704.
Disposal of used electrical and electronic appliances
(intended for use in the countries of the European
Union and other European countries with a separate
collection system for these appliances).
The logo on the article or on its packaging points out
that this article must not be treated as normal house-
hold waste but must be disposed to a recycling collec-
tion point for electronic and electrical waste equip-
ment. By contributing to the correct disposal of this art-
icle you protect the environment and the health of your
fellow men. Environment and health are threatened by
inappropriate disposal.
Material recycling helps reduce the consumption of raw materials.
dditional information on recycling this article can be provided by your local community, municipal
waste disposal facilities or the store where you purchased the article.
ddress:
WilTec Wildanger Technik GmbH
Königsbenden 12 / 28
D-52249 Eschweiler
Important notice:
The reprint or reproduction, even of excerpts, and any commercial use, even in part of this instructions
manual require the written permission of WilTec Wildanger Technik GmbH.
© by WilTec Wildanger Technik GmbH Item 61488 Page 5
http://www.WilTec.de
http://www.aoyue.eu 02 2021-1
http://www.teichtip.de