Greenheck SQ Mixed Flow User manual

Quick Start Guide
SQ MIXED FLOW SQUARE DUCT ADAPTER
Step 1 - Mount Square Duct Adapter to Fan
• Square duct adapter will come in 2 piece or 4 piece
designs per inlet/outlet depending on unit size (see
below)
• SQ-7 to SQ-16 will
consist of 2 pieces
per inlet/outlet
• SQ-18 to SQ-33 will
consist of 4 pieces
per inlet/outlet
• Mount square duct adapter to inlet and/or outlet using
appropriate number of flange pieces and 5/16 inch
semi-gimlet fasteners provided in hardware kit (no nuts
required)
3 WHEEL DIAMETERS 3 WHEEL DIAMETERS
FLEXIBLE DUCT
(BY OTHERS)
SIZE 7-16 (QTY 2)
SIZE 18-33 (QTY 4)
• Repeat previous step for outlet of fan
• Tighten to 132 in·lbs (11 ft·lbs) as specified in the IOM
with 1/2 inch socket DO NOT OVER-TIGHTEN
Step 2 - Install Fan Assembly in Duct Work
3 WHEEL DIAMETERS 3 WHEEL DIAMETERS
FLEXIBLE DUCT
(BY OTHERS)
SIZE 7-16 (QTY 2)
SIZE 18-33 (QTY 4)
• Install fan assembly in proper orientation per application
(use appropriate isolators)
• Mount fan and filter section to ductwork using fasteners
supplied by others
• Fan can be mounted in horizontal or vertical applications
• Flexible duct connectors are recommended for
mounting to the inlet and outlet of the fan
• Install fan with approximately three wheel diameters of
straight duct before and after the fan
NOTE: Filtration information on reverse side
485551 • Square Duct Adapter and Filtration, Rev. 2, August 2023 • Copyright © 2023 Greenheck Fan Corp.
Tools List
• Impact Driver
• 1/2 inch socket
• Torque wrench
• Square duct adapters are
shipped separate from the fan
and are mounted in the field
• This Quick Start Guide does not
replace the Installation Operation
Manual (IOM), refer to the IOM for
more information
• (1) Fan
• Square duct mounting collar
flanges
(4) Sizes 7-16
(8) Sizes 18-33
• (2) Hardware kit
• (1) Isolator kit (optional)
Parts List
3 WHEEL DIAMETERS 3 WHEEL DIAMETERS
FLEXIBLE DUCT
(BY OTHERS)
SIZE 7-16 (QTY 2)
SIZE 18-33 (QTY 4)
3 WHEEL DIAMETERS 3 WHEEL DIAMETERS
FLEXIBLE DUCT
(BY OTHERS)
SIZE 7-16 (QTY 2)
SIZE 18-33 (QTY 4)
3 WHEEL DIAMETERS 3 WHEEL DIAMETERS
FLEXIBLE DUCT
(BY OTHERS)
SIZE 7-16 (QTY 2)
SIZE 18-33 (QTY 4)
3 WHEEL DIAMETERS 3 WHEEL DIAMETERS
FLEXIBLE DUCT
(BY OTHERS)
SIZE 7-16 (QTY 2)
SIZE 18-33 (QTY 4)
ASSEMBLY VIDEO
SQ MIXED FLOW IOM

Quick Start Guide
SQ MIXED FLOW FILTRATION
Step 1 - Mount Filter Section to Fan
• Filter section and fan have “Airflow” decals on the
exterior of the units, ensure the arrows are aligned with
the airflow
• Mount the filter section to the inlet of the fan using
appropriate number of provided 5/16 inch semi-gimlet
fasteners provided in hardware kit (no nuts required)
• Tighten to 132 in∙lbs (11 ft·lbs) as specified in the IOM
with 1/2 inch socket DO NOT OVER-TIGHTEN
• Fan sizing and performance is designed for the filter
section to be mounted directly to the
INLET of the fan
Step 2 - Install Filter and Fan Assembly in Ductwork
• Install assembly in proper orientation for application (use
appropriate isolators)
• Mount assembly to ductwork using fasteners supplied
by others
• Assembly can be mounted in horizontal or vertical
applications
• Flexible duct connectors are recommended for
mounting to the inlet of the filter section and outlet of
the fan
• Install assembly with approximately three wheel
diameters of straight duct before and after the fan
Step 3 - Filter Replacement and Cleaning
• Follow filter replacement and or cleaning intervals
recommended by filter supplier
FILTER SPACER(S)
FILTER(S)
1. Remove access door using 1/2 inch socket
• It is only necessary to remove one access door to
replace filters
2. Remove filter spacers and dirty filters
3. Install new filters in unit and replace filter spacers
• Ensure filters are installed in correct orientation for
proper airflow (marked on filters)
• Locate spacers towards the outside of the unit to
reduce any unnecessary blockage in airflow
4. Reinstall access door using 1/2 inch socket, torque to
132 in∙lbs (11 ft·lbs) DO NOT OVER-TIGHTEN
FILTER SPACER(S)
FILTER(S)
NOTE: Square Duct Adapter information on reverse side
FILTER SPACER(S)
FILTER(S)
485551 • Square Duct Adapter and Filtration, Rev. 2, August 2023 • Copyright © 2023 Greenheck Fan Corp.
Tools List
• Impact Driver
• 1/2 inch socket
• Torque wrench
• Filter sections are shipped
separate from the fan and are
mounted in the field
• This Quick Start Guide does not
replace the Installation Operation
Manual (IOM), refer to the IOM for
more information
• (1) Fan
• (1) Filter section
• (1) Hardware kit
• (2) Isolator kit (optional)
Parts List
ASSEMBLY VIDEO
SQ MIXED FLOW IOM