Denon DN-A100 User manual

SERVICE MANUAL
INTEGRATED STEREO AMPLIFIER
MODEL DN-A100
For Europe model
X0311V.01 DE/CDM 0608
Some illustrations using in this service manual are
slightly different from the actual set.
●
Please use this service manual with referring to the
operating instructions without fail.
●
For purposes of improvement, specifications and
design are subject to change without notice.
●
●
本文中に使用しているイラストは、説明の都合上現物
と多少異なる場合があります。
●
修理の際は、必ず取扱説明書を参照の上、作業を行っ
てください。
サービスをおこなう前に、このサービスマニュアルを
必ずお読みください。本機は、火災、感電、けがなど
に対する安全性を確保するために、さまざまな配慮を
おこなっており、また法的には「電気用品安全法」に
もとづき、所定の許可を得て製造されております。
従ってサービスをおこなう際は、これらの安全性が維
持されるよう、このサービスマニュアルに記載されて
いる注意事項を必ずお守りください。
●
本機の仕様は性能改良のため、予告なく変更すること
があります。
●
補修用性能部品の保有期間は、製造打切後8年です。
注 意
PROFESSIONAL BUSINESS COMPANY
TOKYO, JAPAN
Ver. 1

2
DN-A100
Please heed the points listed below during servicing and inspection.
◎Heed the cautions!
Spots requiring particular attention when servicing, such as
the cabinet, parts, chassis, etc., have cautions indicated on
labels or seals. Be sure to heed these cautions and the cau-
tions indicated in the handling instructions.
◎Caution concerning electric shock!
(1) An AC voltage is impressed on this set, so touching inter-
nal metal parts when the set is energized could cause
electric shock. Take care to avoid electric shock, by for ex-
ample using an isolating transformer and gloves when
servicing while the set is energized, unplugging the power
cord when replacing parts, etc.
(2)There are high voltage parts inside. Handle with extra care
when the set is energized.
◎ Caution concerning disassembly and assembly!
Though great care is taken when manufacturing parts from
sheet metal, there may in some rare cases be burrs on the
edges of parts which could cause injury if fingers are moved
across them. Use gloves to protect your hands.
◎Only use designated parts!
The set's parts have specific safety properties (fire resis-
tance, voltage resistance, etc.). For replacement parts, be
sure to use parts which have the same properties. In particu-
lar, for the important safety parts that are marked ! on wiring
diagrams and parts lists, be sure to use the designated parts.
◎Be sure to mount parts and arrange the
wires as they were originally!
For safety reasons, some parts use tape, tubes or other insu-
lating materials, and some parts are mounted away from the
surface of printed circuit boards. Care is also taken with the
positions of the wires inside and clamps are used to keep
wires away from heating and high voltage parts, so be sure to
set everything back as it was originally.
◎Inspect for safety after servicing!
Check that all screws, parts and wires removed or discon-
nected for servicing have been put back in their original posi-
tions, inspect that no parts around the area that has been
serviced have been negatively affected, conduct an insulation
check on the external metal connectors and between the
blades of the power plug, and otherwise check that safety is
ensured.
(Insulation check procedure)
Unplug the power cord from the power outlet, disconnect the
antenna, plugs, etc., and turn the power switch on. Using a
500V insulation resistance tester, check that the insulation re-
sistance between the terminals of the power plug and the ex-
ternally exposed metal parts (antenna terminal, headphones
terminal, microphone terminal, input terminal, etc.) is 1MΩor
greater. If it is less, the set must be inspected and repaired.
Concerning important safety parts
Many of the electric and structural parts used in the set have
special safety properties. In most cases these properties are
difficult to distinguish by sight, and using replacement parts
with higher ratings (rated power and withstand voltage) does
not necessarily guarantee that safety performance will be pre-
served. Parts with safety properties are indicated as shown
below on the wiring diagrams and parts lists is this service
manual. Be sure to replace them with parts with the designat-
ed part number.
(1) Schematic diagrams ... Indicated by the ! mark.
(2) Parts lists ... Indicated by the ! mark.
Using parts other than the designated parts
could result in electric shock, fires or other
dangerous situations.
SAFETY PRECAUTIONS
The following check should be performed for the continued protection of the customer and service technician.
LEAKAGE CURRENT CHECK
Before returning the unit to the customer, make sure you make either (1) a leakage current check or (2) a line to chassis
resistance check. If the leakage current exceeds 0.5 milliamps, or if the resistance from chassis to either side of the power
cord is less than 460 kohms, the unit is defective.
CAUTION
CAUTION
サービス、点検時にはつぎのことにご注意願います。
◎注意事項をお守りください！
サービスのとき特に注意を必要とする個所についてはキャ
ビネット、部品、シャーシなどにラベルや捺印で注意事項を
表示しています。これらの注意書きおよび取扱説明書などの
注意事項を必ずお守りください。
◎感電に注意！
(1) このセットは、交流電圧が印加されていますので通電時
に内部金属部に触れると感電することがあります。従っ
て通電サービス時には、絶縁トランスの使用や手袋の着
用、部品交換には、電源プラグを抜くなどして感電にご
注意ください。
(2) 内部には高電圧の部分がありますので、通電時の取扱に
は十分ご注意ください。
◎分解、組み立て作業時のご注意！
板金部品の端面の『バリ』は、部品製造時に充分管理をして
おりますが、板金端面は鋭利となっている箇所が有りますの
で、部品端面に触れたまま指を動かすとまれに怪我をする場
合がありますので十分注意して作業して下さい。手の保護の
ために手袋を着用してください。
◎指定部品の使用！
セットの部品は難燃性や耐電圧など安全上の特性を持った
ものとなっています。従って交換部品は、使用されていたも
のと同じ特性の部品を使用してください。特に配線図、部品
表に!印で指定されている安全上重要な部品は必ず指定の
ものをご使用ください。
◎部品の取付けや配線の引きまわしは、
元どおりに！
安全上、テープやチューブなどの絶縁材料を使用したり、プ
リント基板から浮かして取付けた部品があります。また内部
配線は引きまわしやクランパーによって発熱部品や高圧部
品に接近しないように配慮されていますので、これらは必ず
元どおりにしてください。
◎サービス後は安全点検を！
サービスのために取り外したねじ、部品、配線などが元どお
りになっているか、またサービスした個所の周辺を劣化させ
てしまったところがないかなどを点検し、外部金属端子部
と、電源プラグの刃の間の絶縁チェックをおこなうなど、安
全性が確保されていることを確認してください。
（絶縁チェックの方法）
電源コンセントから電源プラグを抜き、アンテナやプラグな
どを外し、電源スイッチを入れます。500V 絶縁抵抗計を用
いて、電源プラグのそれぞれの端子と外部露出金属部［アン
テナ端子、ヘッドホン端子マイク端子、入力端子など］との
間で、絶縁抵抗値が１ MΩ 以上であること、この値以下の
ときはセットの点検修理が必要です。
安全上重要な部品について
本機に使用している多くの電気部品、および機構部品は安全
上、特別な特性を持っています。この特性はほとんどの場合、
外観では判別つきにくく、またもとの部品より高い定格（定
格電力、耐圧）を持ったものを使用しても安全性が維持され
るとは、限りません。安全上の特性を持った部品は、この
サービスマニュアルの配線図、部品表につぎのように表示し
ていますので必ず指定されている部品番号のものを使用願
います。
(1) 配線図…!マークで表示しています。
(2) 部品表…!マークで表示しています。
指定された部品と異なるものを使用した場合に
は、感電、火災などの危険を生じる恐れがあり
ます。
注 意
注 意

3
DN-A100
BLOCK AND LEVEL DIAGRAM

4
DN-A100
ADJUSTMENT
Idling Current
Required measurement equipment: DC Voltmeter
1. Setup
(1) Place the unit at an ordinary position avoiding direct air
flow from an air-conditioner or fan. Do the adjustment at
a temperature between 15 °C (59 °F) and 30 °C (86 °F).
(2) Set control as follows.
• POWER switch →OFF ( ).
• VOLUME control →fully counterclockwise (
min.)
• SPEAKER terminals →open: do not connect the
speakers, dummy load etc.
2. Adjustment
(1) Remove top cover. And then connect DC Voltmeter to the
test points CN31 and CN32 of CUP11904 Main P.W.B.
(2) Connect power cord to AC wall outlet, and turn POWER
switch "ON" ( ).
(3) Right after power on, adjust VR31 and VR32 so that the
DC voltmeter reads 10 ±1mV.
(4) Then after 2 minutes warm up adjust VR31 and VR32 so
that the DC voltmeter reads 10 ±1mV.
(5) And after 10 minutes warm up adjust VR31 and VR32 so
that the DC voltmeter reads 10 ±0.5mV.
VR31
CN31
CN32
VR32
Volume
DC Voltmeter
Power
Trans
調整
アイドリング電流
調整に必要な測定器 : DCVoltmeter
1. 準備
(1) セットをクーラ、扇風機のそばなど風通しの良い場所
を避け、通常の使用状態に置きます。セットの周囲温
度は、15〜30 ℃で調整をおこないます。
(2) セットのスイッチ類は、次のようにセットします。
・パワースイッチ → OFF( )。
・ボリウム調整つまみ →最小の反時計方向 ( )
にセットします。
・スピーカ端子 →無負荷 ( スピーカを接続し
ません。)
2. 調整
(1) 上カバーをはずし、CUP11904 メイン基板のテストポ
イント (CN31,CN32) に DCVoltmeterを接続します。
(2) 電源コードを AC100V（95〜105Vの範囲でも可）に接
続し、電源スイッチを "ON"( ) にします。
(3) 通電後にテストポイントの電圧が（10 ± 1mV）になる
よう、VR31・VR32 を調整します。
(4) 2分後にテストポイントの電圧が（10 ± 1mV）になる
よう、VR31・VR32 を調整します。
(5) 10 分後にテストポイントの電圧が（10 ± 0.5mV）に
なるよう、VR31・VR32 を調整します。

5
DN-A100
SEMICONDUCTORS
Only major semiconductors are shown, general semiconductors etc. are omitted to list.
主な半導体を記載しています。汎用の半導体は記載を省略しています。
1. IC’s
TMP86FH47AUG (IC51)
TMP86FH47AUG Terminal Function
Pin No. Port Name I/O Function
1 VSS VSS
2 XIN X IN
3 XOUT X OUT
4 TEST TEST
5VDD VDD
6 P21 XTIN O MUTE/STANDBY LED
7P22 XTOUT O
8 RESET I RESET
9 P20 INT5 STOP I STOP ACT.
10 P00 INT0 I PROTECTOR
11 P01 PDO4/PWM4/PPG4 TC4 O P. DIRECT RELAY
12 P02 RXD I RXD
13 P03 TXD O TXD
14 P04 SO O DATA
15 P05 SI O STROBE
16 P06 SCK O CLK
17 P07 INT4 O S. DIRECT RELAY
18 P17 I P. DIRECT SW
19 P16 I S. DIRECT SW
20 P15 INT3 AC RELAY 1
21 P14 PPG O VOLUME UP
22 P13 DVO O VOLUME DOWN
23 P12 INT2 TC1 I REMOTE IN

6
DN-A100
LB1930 (IC52)
24 P11 INT1 I POWER OFF
25 P10 PDO3/PWM3 TC3 AC RELAY 2
26 P30 AIN0 AI MODEL
27 P31 AIN1 AI SP A/B
28 P32 AIN2 AI REC. SEL
29 P33 AIN3 AI FUNC. SEL
30 P34 AIN4 STOP2 O H/P MUTE
31 P35 AIN5 STOP3 O SP A
32 P36 AIN6 STOP4 O SP B
33 P37 AIN7 STOP5
34 VAREF Vref
35 AVDD AVDD
36 AVSS AVSS
37 P40 O PHONO
38 P41 O CD
39 P42 O TUNER
40 P43 O AUX-1
41 P44 O AUX-2
42 P45 O AUX-3
43 P46 O TAPE-1
44 P47 O TAPE-2
Pin No. Port Name I/O Function
VCC NC
OUT1
NC
OUT2
P-GND
NC
IN1
IN2
S-GND
LB1930M
1
2
3
4
5
10
9
8
7
6
VCC
IN1
IN2
CPU
60kΩ
60kΩ
80kΩ80kΩ
S-GND P-GND
OUT2
OUT1
M
C1=1uF
1
3
4
5 6
7
9
Contorol
block
TOP VIEW

7
DN-A100
TC9164AN (IC20)
NJM2831F (IC81) LM1117S (IC53)
NJM2068DD (IC10, 52) NJM7806FA(S) (IC92)
KA7812-ABTU (IC91)
TC9164AN
1
2
3
4
5
6
7
8
9
10
11
12
13
14 15
16
17
18
19
20
21
22
23
24
25
26
27
28
VSS
L-S1
L-COM1
L-COM2
L-COM3
ST
GND
VDD
R-COM1
R-COM2
R-COM3
DATA
CK
L-S4
L-S2
L-S3
L-S5
L-S6
L-S7
L-S8
R-S1
R-S2
R-S3
R-S4
R-S5
R-S6
R-S7
R-S8
L-COM 1
L-COM 2
L-COM 3
ST
V
DD
V SS
R-S 1
R-S 2
R-S 3
R-S 4
R-COM 1
R-S 5
R-S 6
R-COM 2
R-S 8
R-S 7
DATA
CK
L-S
1
L-S 2
L-S 3
L-S 4
7
8
9
13
114 28
27
24
19
18
17
16
15
2
3
4
L-S 5
L-S 6
L-S 7
GND
20
21
22
23
25
26
5
6
10
11
12
L-S 8
R-COM 3
Level Shifter Latch Circuit
Shift Register
Level Shifter
Latch Circuit
123
45 1. CONTROL
2. GND
3. NC
4. V OUT
5. V IN
V
OUT
GND
V
IN
Thermal
Protection
Control
Bandgap
Reference
TOP VIEW
LM1117
SOT-223 PKG (FRONT VIEW)
FRONT
VIEW
GND
Vout
Vin
A OUTPUT
A –INPUT
A+INPUT
V
B OUTPUT
V
B –INPUT
B +INPUT
1
2
3
45
7
8
6
1
2
TOP VIEW
Iutput
GND
Output
FRONT
VIEW

8
DN-A100
2. REMOTE CONTROL SENSOR
KSM-603TH2A (RC71)
3. TRANSISTORS
GND
Vcc Vout
Head
Amp
Limiter
Amp BPF Detector & Comparator
Integrator
Hysteresis
Comparator
TOP VIEW
Vout
Vcc
GND
NPN Type
KRC102M 10kohm 10kohm
KSA916Y
KSA1175Y
KSC2316Y
KSC2785Y
KSC3198Y
KTA1024Y
KTA1268GR
KTC3200GR
KTC3206Y
2SB1383P
2SD2083P
KTC3114A
KRA102M
KRC102M
KRC102M
FRONT
VIEW
B
C
E
FRONT
VIEW
BCE
FRONT
VIEW
B
C
E
R1 R2
R1R1
R2R2
EE
CC
B
B
PNP Type
KRA102M
R1 R2
10kohm 10kohm
KRA102M

9
DN-A100
4. DIODES (LED included)
5. POSISTOR
PTFM04BB222QN34 (TH51)
1SS133M
1N4003
SML1216W (Red/Green)
ZJ4.7B
ZJ7.5B
ZJ15B
ZJ16B
FMG-22S
FRONT
VIEW
AKA
FMG-22R
FRONT
VIEW
AKK
SEL-2915A (Orange)
TOP VIEW TOP VIEW
RED ANODE
CATHODE
GREEN ANODE

10
DN-A100
PRINTED WIRING BOARDS
MAIN P.W.B. UNIT
COMPONENT SIDE

11
DN-A100
FOIL SIDE

12
DN-A100
FRONT P.W.B. UNIT
COMPONENT SIDE

13
DN-A100
NOTE FOR PARTS LIST
•Part indicated with the mark "nsp" are not always in stock and possibly to
take a long period of time for supplying, or in some case supplying of part
may be refused.
•When ordering of part, clearly indicate "1" and "I" (i) to avoid mis-
supplying.
•Ordering part without stating its part number can not be supplied.
•Part indicated with the mark " ★" is not illustrated in the exploded view.
•Not including General-purpose Carbon Film Resistor in the P.W.Board
parts list. (Refer to the Schematic Diagram for those parts.)
•Not including General-purpose Carbon Chip Resistor in the P.W.Board
parts list. (Refer to the Schematic Diagram for those parts.)
WARNING:
Parts marked with this symbol !have critical characteristics.
Use ONLY replacement parts recommended by the manufacturer.
s
s
s
s
ss
ss
s
s
s
s
RD : 2B : 1/8 W F : ±1% P :
RC : 2E : 1/4 W G : ±2% NL :
RS : 2H : 1/2 W J : ±5% NB :
RW : 3A : 1 W K : ±10% FR :
RN : 3D : 2 W M : ±20% F :
RK : 3F : 3 W
3H : 5 W
RN 14K 2E 182 G FR
∗18 2 Ö1800 =1.8k
0
2
1R 2 Ö1.2
1
2 R
CE 04W 1H 2R2 M BP
CE : 0J : 6.3 V F : ±1% HS :
CA : 1A : 10 V G : ±2% BP :
CS : 1C : 16 V J : ±5% HR :
CQ : 1E : 25 V K : ±10% DL :
CK : 1V : 35 V M : ±20% HF :
CC : 1H : 50 V Z : +80% U : UL
CP : 2A : 100 V −20% C : CSA
CM : 2B : 125 V P : +100% W : UL-CSA
CF : 2C : 160 V −0% F :
CH : 2D : 200 V C : ±0.25pF
2E : 250 V D : ±0.5pF
2H : 500 V = :
2J : 630 V
∗
22 2 Ö2200µF
0
2
µF
22 2 Ö2200pF=0.0022µF
0
2
pFpF
22 1 Ö220pF
2
(0 2 )
0
(0 0 1 )
2R 2 Ö2.2µF
1
2 R
µF
AC
RD : Carbon 2B : 1/8W F : ±1% P : Pulse-resistant type
RC : Composition 2E : 1/4W G : ±2% NL : Low noise type
RS : Metal oxide film 2H : 1/2W J : ±5% NB : Non-burning type
RW : Winding 3A : 1W K : ±10% FR : Fuse-resistor
RN : Metal film 3D : 2W M : ±20% F : Lead wire forming
RK : Metal mixture 3F : 3W
3H : 5W
CE : Aluminum foil 0J : 6.3V F : ±1% HS : High stability type
electrolytic
CA : Aluminum solid 1A : 10V G : ±2% BP : Non-polar type
electrolytic
CS : Tantalum electrolytic 1C : 16V J : ±5% HR : Ripple-resistant type
CQ : Film 1E : 25V K : ±10% DL : For change and discharge
CK : Ceramic 1V : 35V M : ±20% HF : For assuring high
requency
CC : Ceramic 1H : 50V Z : +80% U : UL part
CP : Oil 2A : 100V –20% C : CSA part
CM : Mica 2B : 125V P : +100% W : UL-CSA type
CF : Metallized 2C : 160V –0% F : Lead wire forming
CH : Metallized 2D : 200V C : ±0.25pF
2E : 250V D : ±0.5pF
2H : 500V = : Others
2J : 630V
ll
ll
lResistors
Ex.:RN 14K 2E 182 GFR
Type Shape Power Resist- Allowable Others
and per- ance error
formance
]Resistance
1 8 2⇒1800 ohm = 1.8 kohm
Indicates number of zeros after effective number.
2-digit effective number.
•Units: ohm
1 R 2⇒1.2 ohm
1-digit effective number.
2-digit effective number, decimal point indicated by R.
•Units: ohm
ll
ll
lCapacitors
Ex.:CE 04W 1H 2R2 M BP
Type Shape Dielectric Capacity Allowable Others
and per- strength error
formance
]Capacity (electrolyte only)
2 2 2⇒2200µF
Indicates number of zeros after effective number.
2-digit effective number.
•Units: µF.
2 R 2⇒2.2µF
1-digit effective number.
2-digit effective number, decimal point indicated by R.
•Units: µF.
]Capacity (except electrolyte)
2 2 2⇒2200pF=0.0022µF
(More than 2) Indicates number of zeros after effective number.
2-digit effective number.
•Units: pF.
2 2 1⇒220pF
(0 or 1) Indicates number of zeros after effective number.
2-digit effective number.
•Units: pF.
•When the dielectric strength is indicated in AC, "AC" is included after the dieelectric
strength value.
部品表について
１．nsp 印の部品は常時在庫していませんので供給に長時間を要すること
があります。
場合によっては、供給をお断りすることがあります。
２．部品を発注する際は特に数字の " １ " と英字の "Ｉ" との区別をはっき
り記入してください。
３．部品番号を表示していない部品は供給できません。
４．!印の部品は安全上重要な部品です。交換するときは、安全および性
能維持のため必ず指定の部品をご使用ください。
５．★印のついている部品は分解図中には記載していません。
６．汎用カーボン抵抗器は記載していません。定数は回路図を参照願いま
す。
７．汎用カーボンチップ抵抗器は記載していません。定数は回路図を参照
願います。
８．部品表の抵抗器、コンデンサの品名記号の読み方は表を参照してくだ
さい。

14
DN-A100
PARTS LIST OF P.W.B. UNIT
＊本表に記載されている部品は、補修用部品のため製品に使用している部品とは一部、形状、寸法などが異なる場合があります。
＊The parts listed below are for maintenance only, might differ from the parts used in the unit in appearances or dimensions.
＊"nsp" 印の部品は常時在庫していませんので供給に長時間を要することがあります。場合によっては、供給をお断りする場合があります。
＊Part indicated with the mark “nsp” are not always in stock and possibly to take a long period of time for supplying, or in some case supplying of part may be refused.
MAIN P.W.B. UNIT ASS'Y
Ref. No. nsp Part No. Part Name Remarks Q'ty New
SEMICONDUCTORS GROUP
IC10 00D 943 0198 207 IC NJM2068DD HVINJM2068DD
IC20 00D 943 0198 401 IC TC9164AN HVITC9164AN
IC51 00D 943 0196 801 IC TMP86FH47AUG(JZ
CVITMP86FH47AUG(JZ)
IC52 00D 943 0196 500 IC LB1930M CVILB1930M
IC61 00D 943 0038 902 IC 1117S-3.3V HVILM1117S-3V3
IC91 00D 943 0200 302 IC MC7812C HVIMC7812C
IC92 00D 943 0198 304 IC NJM7806FA HVINJM7806FA
Q201,202 00D 943 0107 804 TR KRC102M HVTKRC102MT
Q301-304 00D 943 0198 906 TR KTC3200GR HVTKTC3200GRT
Q307-310 00D 943 0198 906 TR KTC3200GR HVTKTC3200GRT
Q311,312 00D 943 0006 206 TR KTA1268GR HVTKTA1268GRT
Q313,314 00D 943 0198 702 TR KTA1024Y HVTKTA1024YT
Q315,316 00D 943 0199 002 TR KTC3206YA HVTKTC3206YAT
Q317,318 00D 943 0198 809 TR KTC3114A HVTKTC3114A
Q319,320 00D 943 0200 700 TR 2SD2083P CVT2SD2083P-OKM
Q321,322 00D 943 0197 004 TR 2SB1383P CVT2SB1383P-OKM
Q323,324 00D 943 0198 906 TR KTC3200GR HVTKTC3200GRT
Q325 00D 943 0006 206 TR KTA1268GR HVTKTA1268GRT
Q326 00D 943 0198 508 TR KSA1175Y HVTKSA1175YT
Q327-330 00D 943 0107 804 TR KRC102M HVTKRC102MT
Q552 00D 943 0154 200 TR KRA102M HVTKRA102MT
Q553,554 00D 943 0107 804 TR KRC102M HVTKRC102MT
Q556,557 00D 943 0107 804 TR KRC102M HVTKRC102MT
Q558 00D 943 0037 408 TR KSC2785Y HVTKSC2785YT
Q559 00D 943 0107 804 TR KRC102M HVTKRC102MT
Q565 00D 943 0107 804 TR KRC102M HVTKRC102MT
Q601 00D 943 0108 104 TR KTC2874B HVTKTC2874BT
Q603 00D 943 0037 408 TR KSC2785Y HVTKSC2785YT
Q604,605 00D 943 0107 804 TR KRC102M HVTKRC102MT
Q606-608 00D 943 0154 200 TR KRA102M HVTKRA102MT
Q609 00D 943 0037 408 TR KSC2785Y HVTKSC2785YT
Q610 00D 943 0154 404 TR KTC3198Y HVTKTC3198YT
Q611 00D 943 0154 200 TR KRA102M HVTKRA102MT
Q612 00D 943 0154 404 TR KTC3198Y HVTKTC3198YT
Q613 00D 943 0037 408 TR KSC2785Y HVTKSC2785YT
Q614 00D 943 0107 804 TR KRC102M HVTKRC102MT
Q902 00D 943 0059 004 TR KSC2316Y HVTKSC2316YT
Q903 00D 943 0198 605 TR KSA916Y HVTKSA916YT
D201,202 00D 943 0182 609 DIODE 1SS133 CVD1SS133MT
D301-304 00D 943 0195 909 ZENER DIODE ZJ16B CVDZJ16BT
D305-308 00D 943 0182 609 DIODE 1SS133 CVD1SS133MT
D309,310 00D 943 0196 102 ZENER DIODE ZJ3.0B CVDZJ3.0BT
D311 00D 943 0182 502 DIODE 1N4003 CVD1N4003ST
D312 00D 943 0182 609 DIODE 1SS133 CVD1SS133MT
D313,314 00D 943 0196 102 ZENER DIODE ZJ3.0B CVDZJ3.0BT
D315-319 00D 943 0182 609 DIODE 1SS133 CVD1SS133MT

15
DN-A100
D363,364 00D 943 0182 609 DIODE 1SS133 CVD1SS133MT
D561 00D 943 0182 609 DIODE 1SS133 CVD1SS133MT
D603 00D 943 0182 502 DIODE 1N4003 CVD1N4003ST
D604-609 00D 276 0704 903 DIODE 1SR35-400A
D610 00D 943 0196 306 ZENER DIODE ZJ7.5B CVDZJ7.5BT
D611 00D 943 0196 209 ZENER DIODE ZJ4.7B CVDZJ4.7BT
D612 00D 943 0182 609 DIODE 1SS133 CVD1SS133MT
D613,614 - WIRE, COPPER C3A206
D615 00D 943 0182 609 DIODE 1SS133 CVD1SS133MT
D901 00D 943 0195 608 DIODE FMG-22S(A-K-A) CVDFMG-22S
D902 00D 943 0195 501 DIODE FMG-22R(K-A-K) CVDFMG-22R
D903-908 00D 943 0182 502 DIODE 1N4003 CVD1N4003ST
D911,912 00D 943 0182 502 DIODE 1N4003 CVD1N4003ST
D913,914 00D 943 0195 909 ZENER DIODE ZJ16B CVDZJ16BT
D915-917 00D 943 0182 502 DIODE 1N4003 CVD1N4003ST
RESISTORS GROUP
R345-348 - RES, CARBON 3.9k ohm 1/4W J CRD25FJ392T
R349-352 00D 943 0194 201 RES, CEMENT 0.22 ohm 5W K CRF5EKR22H
R369 - RES, CARBON 22 ohm 1/4W J CRD25FJ220T
R370 00D 943 0200 409 RES, METAL OXIDE 390 ohm 1W J CRG1ANJ391H
R371 - RES, CARBON 22 ohm 1/4W J CRD25FJ220T
R372 00D 943 0200 409 RES, METAL OXIDE 390 ohm 1W J CRG1ANJ391H
R373,374 00D 943 0200 506 RES, METAL OXIDE 10 ohm 1W J CRG1ANJ100H
R382 - RES, CARBON 22 ohm 1/4W J CRD25FJ220T
R384 - RES, CARBON 22 ohm 1/4W J CRD25FJ220T
R388-391 - RES, CARBON 3.9k ohm 1/4W J CRD25FJ392T
R902,903 - RES, CARBON 22k ohm 1/4W J CRD25TJ223T
R904,905 00D 943 0194 405 RES, FUSE 0.47 ohm 1W J CRQ1AJR47H
R912 00D 943 0194 308 RES, FUSE 0.3 ohm 1/6W K CRQ16AKR30T
VR31,32 00D 943 0196 908 SEMI FIXED RESISTOR 500 ohm CVN1SA501B01T
CAPACITORS GROUP
C101-104 - CAP, CERAMIC 100pF 50V KB CCKT1H101KB
C105,106 - CAP, ELECT 10uF 50V CCEA1HH100T
C109,110 - CAP, ELECT 220uF 16V CCEA1CH221T
C111,112 - CAP, MYLAR 6800pF 50V J HCQI1H682JZT
C113,114 - CAP, MYLAR 0.018uF 50V J HCQI1H183JZT
C115,116 - CAP, MYLAR 6800pF 50V J HCQI1H682JZT
C117,118 - CAP, ELECT 10uF 50V CCEA1HH100T
C119,120 - CAP, MYLAR 3900pF 50V J HCQI1H392JZT
C121,122 - CAP, ELECT 22uF 50V CCEA1HH220T
C123,124 - CAP, CERAMIC 0.1uF 50V ZF CCFT1H104ZF
C215,216 - CAP, ELECT 10uF 50V CCEA1HH100T
C217 - CAP, CERAMIC 47pF 50V JC CCCT1H470JC
C235,236 - CAP, CERAMIC 0.022uF 50V ZF CCFT1H223ZF
C301,302 - CAP, ELECT 22uF 50V CCEA1HH220T
C303,304 - CAP, CERAMIC 220pF 50V KB CCKT1H221KB
C305,306 - CAP, CERAMIC 1000pF 50V KB HCBS1H102KBT
C309-312 00D 943 0188 700 CAP, ELECT 100uF/25V (RA3) CCEA1ERA3101T
C313,314 - CAP, CERAMIC 5pF 50V CC CCCT1H050CC
C315-318 - CAP, MYLAR 3900pF 50V J HCQI1H392JZT
C319,320 00D 943 0189 204 CAP, ELECT 22uF 50V (RFS) CCEA1HRFS220E
Ref. No. nsp Part No. Part Name Remarks Q'ty New

16
DN-A100
C321,322 - CAP, CERAMIC 5.6pF 50V KC HCBS1H5R6KCT
C323-326 00D 943 0189 301 CAP, ELECT 100uF 63V (RFS) CCEA1JRFS101E
C327,328 - CAP, CERAMIC 1000pF 50V KB CCKT1H102KB
C367 - CAP, ELECT 4.7uF 50V CCEA1HH4R7T
C373-378 - CAP, MYLAR 0.047uF 50V J HCQI1H473JZT
C379,380 - CAP, CERAMIC 0.1uF 50V ZF CCFT1H104ZF
C381-384 00D 943 0188 700 CAP, ELECT 100uF/25V (RA3) CCEA1ERA3101T
C553 - CAP, ELECT 100uF 16V CCEA1CH101T
C554,555 - CAP, CERAMIC 0.01uF 50V ZF CCFT1H103ZF
C556 - CAP, ELECT 100uF 16V CCEA1CH101T
C557 - CAP, CERAMIC 0.1uF 50V ZF CCFT1H104ZF
C558 - CAP, ELECT 100uF 16V CCEA1CH101T
C602 - CAP, ELECT 22uF 50V CCEA1HH220T
C603 00D 943 0188 302 CAP, ELECT 3300uF 16V CCEA1CH332E
C604 - CAP, ELECT 470uF 10V CCEA1AH471T
C605 - CAP, ELECT 10uF 50V CCEA1HH100T
C606 - CAP, ELECT 1uF 50V CCEA1HH1R0T
C607 - CAP, ELECT 2.2uF 50V CCEA1HH2R2T
C608 - CAP, CERAMIC 0.01uF 50V ZF CCFT1H103ZF
C610 - CAP, ELECT 470uF 10V CCEA1AH471T
C613 - CAP, ELECT 47uF 25V CCEA1EH470T
C614 - CAP, CERAMIC 0.047uF 50V ZF CCFT1H473ZF
C615 - CAP, CERAMIC 0.022uF 50V ZF CCFT1H223ZF
C901-903 - CAP, METALLIZED 0.1uF 100V J CCME2A104JXT
C904,905 00D 943 0189 408 CAP, ELECT 8200uF 56V (LAO) CCET56VLAO822N
C906,907 - CAP, CERAMIC 0.01uF 50V ZF HCBS1H103ZFT
C908 - CAP, ELECT 0.47uF 50V CCEA1HHR47T
C909,910 00D 943 0188 603 CAP, ELECT 1000uF 25V CCEA1EH102E
C911,912 - CAP, ELECT 100uF 25V CCEA1EH101T
C915 - CAP, METALLIZED 0.1uF 100V J CCME2A104JXT
C917-919 - CAP, ELECT 47uF 25V CCEA1EH470T
C920 00D 943 0188 603 CAP, ELECT 1000uF 25V CCEA1EH102E
C921 - CAP, ELECT 47uF 25V CCEA1EH470T
C922 - CAP, CERAMIC 0.1uF 50V ZF CCFT1H104ZF
OTHERS PARTS GROUP
BN92 - WIRE ASS'Y, 2.0MM/600MM/6P CWB2B906600EN
CN10 - WAFER, STRAIGHT, 6PIN CJP06GA19ZY
CN31,32 - WAFER CJP03GA01ZY
CN50 - WAFER, STRAIGHT, 8PIN CJP08GA19ZY
CN51 - WAFER, STRAIGHT, 4PIN CJP04GA19ZY
CN52 - WAFER, STRAIGHT, 4PIN CJP04GA01ZY
CN53 - WAFER, STRAIGHT, 7PIN CJP07GA19ZY
CN54 - WAFER, STRAIGHT, 4PIN CJP04GA01ZY
CN58 - WAFER, STRAIGHT, 10PIN CJP10GA19ZY
CN93 - WAFER CJP03GA01ZY
CN95 - WAFER CJP03GA90ZY
JK11 00D 943 0191 700 2P JACK, IN/OUT CJJ4N034Z
JK21-23 00D 943 0191 807 4P JACK, IN/OUT CJJ4P028Z
JK24 00D 943 0191 700 2P JACK, IN/OUT CJJ4N034Z
JK31 00D 943 0191 904 TERMINAL, SPEAKER CJJ5Q006Z
JW53,54 - PALTE, EARTH HJT1A025
Ref. No. nsp Part No. Part Name Remarks Q'ty New

17
DN-A100
L101,102 00D 943 0193 601 COIL, TOROIDAL CLU9S004Z
L301,302 00D 943 0193 106 COIL, SPEAKER (0.5uH) CLEY0R5KAK
RY31-33 00D 943 0195 006 RELAY G5PA-28 CSL3A017ZU
RY51-52 00D 943 0195 103 RELAY CSL4A013ZE
TH51 00D 943 0194 609 POSISTOR PTFM04BB222QN34
CRTPTFM04BB222Q
X501 00D 943 0196 403 RESONATOR, CERAMIC
CSTLS4M19G56-A0
CVFCSTLS4M19G56-A0
- BRACKET CMD1A596
- HEAT SINK BRACKET CMD1A597
- HEAT SINK CMY1A268
- HEAT SINK CMY2A048
- HEAT SINK CMY1A218
- HEAT SINK CMY1A043
- SCREW, SPECIAL CHD1A012R
- SCREW CTB3+6JR CTB3+6JR
- SCREW CTW3+8JR CTW3+8JR
- SCREW CTB3+8J CTB3+8J
- SCREW CTB3+8JR CTB3+8JR
Ref. No. nsp Part No. Part Name Remarks Q'ty New

18
DN-A100
FRONT P.W.B. UNIT ASS'Y
Ref. No. nsp Part No. Part Name Remarks Q'ty New
SEMICONDUCTORS GROUP
IC52 00D 943 0198 207 IC NJM2068DD HVINJM2068DD
Q651-658 00D 943 0154 200 TR KRA102M HVTKRA102MT
Q901,902 00D 943 0108 104 TR KTC2874B HVTKTC2874BT
D651-656 00D 943 0195 705 LED SEL2915A Orang CVDSEL2915A
D661-672 00D 943 0182 609 DIODE 1SS133 CVD1SS133MT
D701 00D 943 0198 100 LED SML1216W Red/Green HVDSML1216W
D901,902 00D 943 0182 609 DIODE 1SS133 CVD1SS133MT
D910-915 00D 943 0182 502 DIODE 1N4003 CVD1N4003ST
RESISTORS GROUP
VR51 00D 943 0197 305 VR, MOTOR CVV9Y13B503Z
VR52 00D 943 0197 101
RES, VARIABLE RA1450GOE0D-HA1 CVV2X13M104Z
VR53 00D 943 0197 208 VR, TONE D103-Q1-FB200B1 CVV2X18D103Z
VR54 00D 943 0197 208 VR, TONE D303-Q1-FB200B1 CVV2X19D303Z
VR61 00D 943 0195 200 SW, ROTARY SSRM1C7800 CSRCA001Z
CAPACITORS GROUP
C501 - CAP, ELECT 10uF 50V CCEA1HH100T
C502 - CAP, CERAMIC 39pF 50V JC CCCT1H390JC
C503 - CAP, MYLAR 3300pF 50V J HCQI1H332JZT
C504 - CAP, MYLAR 0.047uF 50V J HCQI1H473JZT
C505 - CAP, ELECT 0.47uF 50V CCEA1HHR47T
C506 - CAP, MYLAR 0.033uF 50V J HCQI1H333JZT
C510 - CAP, CERAMIC 0.01uF 50V ZF CCFT1H103ZF
C511 - CAP, ELECT 4.7uF 50V CCEA1HH4R7T
C512 - CAP, ELECT 10uF 50V CCEA1HH100T
C515 - CAP, MYLAR 0.033uF 50V J HCQI1H333JZT
C517 - CAP, ELECT 0.22uF 50V CCEA1HHR22T
C519 - CAP, ELECT 0.1uF 50V CCEA1HH0R1T
C521 - CAP, ELECT 0.47uF 50V CCEA1HHR47T
C522,523 - CAP, ELECT 100uF 25V CCEA1EH101T
C524 - CAP, CERAMIC 220pF 50V KB CCKT1H221KB
C525 - CAP, ELECT 22uF 16V CCEA1CN220T
C591 - CAP, CERAMIC 0.1uF 50V ZF CCFT1H104ZF
C601 - CAP, ELECT 10uF 50V CCEA1HH100T
C602 - CAP, CERAMIC 39pF 50V JC CCCT1H390JC
C603 - CAP, MYLAR 3300pF 50V J HCQI1H332JZT
C604 - CAP, MYLAR 0.047uF 50V J HCQI1H473JZT
C605 - CAP, ELECT 0.47uF 50V CCEA1HHR47T
C606 - CAP, MYLAR 0.033uF 50V J HCQI1H333JZT
C611 - CAP, ELECT 4.7uF 50V CCEA1HH4R7T
C612 - CAP, ELECT 10uF 50V CCEA1HH100T
C615 - CAP, MYLAR 0.033uF 50V J HCQI1H333JZT
C617 - CAP, ELECT 0.22uF 50V CCEA1HHR22T
C619 - CAP, ELECT 0.1uF 50V CCEA1HH0R1T
C621 - CAP, ELECT 0.47uF 50V CCEA1HHR47T
C624 - CAP, CERAMIC 220pF 50V KB CCKT1H221KB
C625 - CAP, CERAMIC 0.1uF 50V ZF CCFT1H104ZF
C661 - CAP, CERAMIC 0.01uF 50V ZF CCFT1H103ZF
C701-703 - CAP, CERAMIC 0.01uF 50V ZF CCFT1H103ZF

19
DN-A100
C704 - CAP, ELECT 220uF 16V CCEA1CH221T
C705 - CAP, CERAMIC 0.01uF 50V ZF CCFT1H103ZF
C706 - CAP, CERAMIC 47pF 50V JC CCCT1H470JC
! C901,902 00D 943 0024 408 CAP, CERAMIC 0.0047uF/2.5KV KCKDKS472ME
C903 - CAP, CERAMIC 0.1uF 50V ZF CCFT1H104ZF
C904 00D 943 0188 603 CAP, ELECT 1000uF 25V CCEA1EH102E
C905 - CAP, ELECT 0.47uF 50V CCEA1HHR47T
C906 - CAP, CERAMIC 0.01uF 50V ZF CCFT1H103ZF
OTHERS PARTS GROUP
BK91 - BRACKET, PCB(A) CMD1A188
BN50 - WIRE ASS'Y 2.0MM/130MM/8P CWB2B908130EN
BN51 - WIRE ASS'Y 2.0MM/220MM/4P
CWZPMA500AEBN51
BN52 - WIRE ASS'Y 2.5MM/80MM/4P
CWZPMA500AEBN52
BN53 - WIRE ASS'Y 2.0MM/270MM/7P CWB2B907270EN
BN54 - WIRE ASS'Y CWB1C904220BM
BN56,57 - WAFER CJP07GF107ZY
BN58 - WIRE ASS'Y CWB2B910100EN
BN59 - WIRE ASS'Y CWB2B903080EN
CN56,57 - WAFER CJP07HA37ZM
CN59 - WAFER, STRAIGHT, 3PIN CJP03GA19ZY
CN90 - WAFER CJP02KA060ZY
CN91 - WAFER CJP02GA89ZY
CN92 - WAFER, STRAIGHT, 6PIN CJP06GA19ZY
CN94 - WAFER CJP02GA89ZY
! F901 00D 943 0199 109 FUSE 2.5A/250V KBA2C2500TLEY
! F902 00D 943 0199 109 FUSE 2.5A/250V KBA2C2500TLEY
JK61 00D 943 0198 003 JACK, PHONE HJJ2E018Z
JW54 - WIRE ASS'Y(1P) CWE8202080RV
JW62 - WIRE ASS'Y CWE8202110RV
JW91 - WIRE ASS'Y (RED/N.C/BLACK) CWB4FA32300PU
! OL91 00D 943 0199 206 OUTLET, AC(EUR/1P) KJJ7A022Z
RC71 00D 943 0194 706 SENSOR, REMOTE (KSM603TH2E) CRVKSM603TH2E
RY91 00D 943 0200 807 RELAY, G2R-14 (DC 5V) CSL2C002ZE
RY92 00D 943 0194 900 RELAY, G5PA-1 (DC 6V) CSL1E002ZE
SW51 00D 943 0194 803 SW, PUSH (JPS-4281SA) CSH2D013Z
SW52-54 00D 943 0199 400 SW, PUSH (220014) KSH2B003Z
SW91 00D 943 0140 609 SW, PUSH (CSH1A010ZV) CSH1A010ZV
! TRS1 00D 943 0193 203 TRANSFORMER, SUB CLT5I008ZE
- HOLDER, FUSE for F901,902 KJCFC5S
Ref. No. nsp Part No. Part Name Remarks Q'ty New

20
DN-A100
EXPLODED VIEW
23
2-1 2-4
2-5
2-3
2-2
3
10
4
5
6
7
8
9
11
12
13
14
15 -1
15 -2
16
17
18
19
21
20
22
1
24
25
26
27
28
29
51
51
52
53
53
53
54
55
56
57
57 57
57
57
58
58
58
59
59
60
61
62
62
63
64
65
66
67
Parts marked with this symbol have critical
characteristics.
Use ONLY replacement parts recommended by
the manufacturer.
WARNING:
印の部分は安全を維持するために重要
な部品です。従って交換時は必ず指定の
部品を使用してください。