Denon DN-HC4500 - DJ Mixer USB Controller User manual

DENON CONTROLLERS QUICKSTART GUIDE
• DENON DN-HC4500 • DENON DN-HD2500 •
SERATO SCRATCH LIVE 3RD PARTY CONTROLLER QUICKSTART 1. 9.11

SERATO SCRATCH LIVE 3RD PARTY CONTROLLER QUICKSTART 1. 9.1
2
INSTALLATION
MAC
1.Connect your DN-HD2500 to an available USB
port.
2. Your DN-HD2500 will be detected automatically
and will be ready to use.
WINDOWS
1. Connect your DENON DN-HD2500 to an
available USB port.
2. You will see the following prompt from
Windows: “Can Windows connect to Windows
update to search for software?”
3. Select: “No, not this time” followed by “Install
automatically”
4. Windows will then notify you that it has found
the device: “Found new Hardware DN-HD2500,
followed by USB composite device” bubbles will
appear.
5. You will be prompted to install 2 drivers. “USB
composite device” and “USB audio device”.
Follow the prompts as per the usual driver
installation method for windows.
SETUp
1. Start Scratch LIVE and switch both decks to
internal mode.
2. Turn on the DN-HD2500 and the set it to
“Midi”mode. To set it to “Midi” mode, press the
SOURCE button, and use the PARAMETERS
knob to scroll through the options. *make sure
you set it to MIDI and not PC.
3. You will now be able to control Scratch LIVE
with your DENON DN-HD2500.
BASIC OpERATION
To select and load tracks, use the PARAMETERS
knob to scroll through your library and crates.
By pressing the PARAMETERS knob can select
a crate, sub-crate, and load your track all without
touching your computer. The BACK button
returns you to the previous location selected.
PLAY/ PAUSE plays and stops your track.
Control the speed of the braking as normal in the
setup menu of Scratch LIVE.
Pitch Bend, fast search, eject, and tap tempo are
all mapped directly to Scratch LIVE.
The PITCH / KEY button turns the Key Lock
feature on or off in Scratch LIVE.
The DUMP button controls the Censor feature in
Scratch LIVE.
You can assign up to 2 Loops using the HOT
START / LOOPING buttons on the DN-HD2500.
Use the A1/A2 button to start your loop and the
B button to set your end point. To exit a loop,
press the EXIT/RELOOP key. To return to your
loop, use the A1 and A2 keys for loops 1 and 2
respectively.
DENON DN-HD2500

SERATO SCRATCH LIVE 3RD PARTY CONTROLLER QUICKSTART 1. 9.1 3
DN-HD2500 CONTROLS SCRATCH LIVE FUNCTIONALITy
1 Play/Pause Play/Pause.
2 Cue CD player style cue.
3 Jog mode Toggles between scratch and bend modes.
4 Range / Key Keylock. Press and hold for one second to toggle pitch slider range.
5 Pitch Slider Pitch Slider +/- 8%.
6 Tap Tap Tempo have to tap at least 4 times, hold button down to cancel save.
7 Pitch bend +/- Pitch bend +\-.
8 Parameter knob Scroll crates / browse / track list.
9 Parameter press Enter crate / browse column / load track.
10 Eject / Playlist Eject.
11 Back Up a level of your browsing.
12 Fast search « » RW / FF.
13 Cont/single Toggles auto mode.
14 Dump Censor.
15 Reverse Reverse.
16 A1 - A2 Sets the Loop In point.
17 B Sets the Loop Out point.
1 2 3 1 2 34 4
6 6
11
5 5
7
9
12 12
13
81514 1514
1017
11
7
9
13
8
1016 1716

SERATO SCRATCH LIVE 3RD PARTY CONTROLLER QUICKSTART 1. 9.1
4
INSTALLATION
MAC
1. Connect your DN-HC4500 to an available
USB port.
2. The Denon DN-HC4500 will be detected
automatically and will be ready to use.
WINDOWS
1. Connect your DENON DN-HC4500 to an
available USB port.
2. You will see the following prompt from
Windows: “Can Windows connect to Windows
update to search for software?”
3. Select: “No, not this time” followed by “Install
automatically”
4. Windows will then notify you that it has found
the device: “Found new Hardware DN-HC4500,
followed by USB composite device” bubbles will
appear.
5. You will be prompted to install 2 drivers. “USB
composite device” and “USB audio device”.
Follow the prompts as per the usual driver
installation method for windows.
SETUp
1. Start ScratchLIVE and switch both decks to
internal mode.
2. Turn on the Denon DN-HC4500. It will
automatically be in PC link mode.
3. You will now be able to control Scratch LIVE
with your DENON DN-HC4500.
BASIC OpERATION
To select and load tracks, use the PARAMETERS
knob to scroll through your library and crates.
By pressing the PARAMETERS knob can select
a crate, sub-crate, and load your track all without
touching your computer. The BACK button
returns you to the previous location selected.
SETTING CUE pOINTS
1. Press the “MEMO” button.
2. You can then set your cue points 1-5 using the
“FUNCTION” keys along the top.
3. Once set, press the “MEMO” button again to
return to the main menu.
Your cues will now be mapped to the
“FUNCTION” keys. To delete or change your cue
points, simply repeat process 1 -3.
USING LOOpS
There are 2 loop cues you can use on the DN-
HC4500 - A1 and A2. To set the beginning (“In’)
point of the A1 loop, push the “A1” button.
To set the end (“Out”) point of the loop push the
“B” button. This button sets the end point for both
loop cues, depending on which loop is currently
playing. To clear all loop points simultaneously,
hold down the “FLIP” button for 3 seconds.
DENON DN-HC4500

SERATO SCRATCH LIVE 3RD PARTY CONTROLLER QUICKSTART 1. 9.1 5
DN-HC4500 CONTROLS SCRATCH LIVE FUNCTIONALITy
1 Play/Pause Play/Pause.
2 Cue CD player style cue.
3 Jog mode Toggles between scratch and bend modes.
4 Range / Key Keylock. Press and hold for one second to toggle pitch slider range.
5 Pitch Slider Pitch Slider +/- 8%.
6 Tap Tap Tempo have to tap at least 4 times, hold button down to cancel save.
7 Pitch bend +/- Pitch bend +\-.
8 Parameter knob Scroll crates / browse / track list.
9 Parameter press Enter crate / browse column / load track.
10 Eject / Playlist Eject.
11 Back Up a level of your browsing.
12 Function Key 1-5 Cue 1-5.
13 Memo Edit Cue Mode.
14 Time Toggle time remaining/elapsed for display.
15 Fast search « » RW / FF.
16 Cont/single Toggles auto mode.
17 Title Scrolls the song title if display can’t fit name.
18 A1 - A2 Sets the Loop In point.
19 B Sets the Loop Out point.
2 3 4611151617 175
7912 810
12 3191811918 6111516 5
7912 810