Denon DNV210 - Professional DVD Player User manual

DVD VIDEO PLAYER
DN-V210/DN-V310
USER GUIDE
MODE D’EMPLOI
GUÍA DEL USUARIO

FRANÇAISENGLISHSVENSKA
Printed in China
07/2007 00M47AZ851030
D&M Holdings Inc.
PROFESSIONAL BUSINESS COMPANY
TOKYO, JAPAN
http://www.dm-pro.jp
TILLÄGG
Vänligen observera att nedanstående anvisningar
förklarar ideala hanteringsprocedurer för JPEG- och
bakgrundsfunktionaliteten.
Beträffande JPEG-bilder
Det är vanligare att pixelupplösningen skiljer sig mellan
skärmupplösningen och de JPEG-bilder som ska visas
än att den inte gör det. Detta kan leda till att resultatet av
bildvisningen inte blir optimalt.
Om inställningen på din display inte har ställts in på
"FULL," rekommenderas det att du ändrar storleken på
dina bilder för att återge lämpliga pixeldimensioner för
bästa visningsresultat.
Dessutom skiljer sig upplösningen på utdata mellan
videoutdata på DVD-spelaren och videoformat såväl
som utdatainställningar. Följande tabell visar ideal
pixelupplösning för fullskärmsvisning av dina JPEG-bilder.
Utdata Upplösning
Komposit, S-Video, Komponent 720 x 540 pixlar
HDMI med HD JPEG AV 720 x 540 pixlar
HDMI med HD JPEG PÅ
(720p/1080i) 1920 x 1080 pixlar
OBSERVERA
Dessa inställningar är användarens ansvar. D&M
Professional kan inte garantera varje displays funktion.
Beträffande bakgrund
Eftersom bakgrundsfunktionen på DN-V210/V310 DVD-
spelare kräver att varje rad på skärmen utnyttjas (även
rader som kan sträcka sig utanför vad som är synligt för
ögat) kan vissa bakgrundsbilder visas annorlunda mot vad
de hade gjort om de hade visats som JPEG.
Dessutom kan viss pixelering (taggighet) eller digitalt
brus uppstå på JPEG-bilden då den är lagrad som
bakgrundsbild. Detta syns tydligare vid räta linjer och på
komplexa bilder såsom ansikten. Bäst visas enklare, platta
och mindre detaljerade bilder.
OBSERVERA
Vissa JPEG-bilder är inte lämpliga som bakgrundsbilder.
Om så är fallet byts inte bakgrundsbilden ut. Detta kan
bero på pixelupplösning eller färginställningar.
ADDENDUM
La notice ci-après explique les procédures de
fonctionnement idéal des fonctions JPEG et papier peint.
A propos de JPEG
Il arrive très souvent que la résolution de l’écran et celle
des images JPEG que l’on souhaite afficher aient une
résolution en pixels différente. Cela produit, à l’affichage
des images, des résultats loin d’être parfaits.
Si votre écran n’est pas réglé sur « FULL », nous vous
conseillons de redimensionner vos images pour qu’elles
correspondent aux dimensions en pixels correctes et à
une visualisation de qualité optimale.
Par ailleurs, la résolution de sortie diffère suivant les
sorties vidéo du lecteur DVD et du format vidéo ainsi que
des réglages de sortie. A titre indicatif, le tableau suivant
illustre la résolution en pixels idéale pour une vision Plein
écran de vos images JPEG.
Sortie Résolution
Combiné, S-Vidéo, Composant 720 x 540 pixels
HDMI avec HD JPEG OFF 720 x 540 pixels
HDMI avec HD JPEG ON
(720p/1080i) 1920 x 1080 pixels
REMARQUE
L’utilisateur est responsable de ces réglages. D&M
Professional ne peut garantir les performances de tous les
écrans.
A propos du papier peint
Du fait de la fonction papier peint des lecteurs DVD DN-
V210/V310, qui utilise chaque ligne de l’écran (allant
parfois même au-delà de la partie visible de l’écran),
certains papiers peints n’ont pas le même aspect que s’ils
étaient visualisés comme image JPEG.
De plus, certaines animations image par image (distorsion
de repliement) ou bruit numérique peuvent apparaître
lorsque l’image JPEG est mémorisée comme papier
peint. Cela est plus évident à proximité des lignes droites
ou dans les images complexes comme les visages. Les
images simples, plates et contenant moins de détails
seront parfaitement visualisées.
REMARQUE
Certaines images JPEG peuvent ne pas convenir comme
papier peint. Si cela est le cas, le papier peint ne change
pas. La cause peut provenir de la résolution en pixels ou
des réglages couleur.
ADDENDUM
Please be advised, the below notes explain ideal
operating procedures for JPEG and Wallpaper
functionality.
Regarding JPEGS
More often than not, the screen resolution and the JPEGs
intended on being displayed differ in pixel resolution. This
may lead to less than optimal results in the display of the
images.
If the setting of your display is not set to “FULL,” then it
is recommended that you resize your images to reflect
appropriate pixel dimensions for optimum viewing results.
In addition, the resolution of the output differs between
video outputs on the DVD player and video format as well
as output settings. As a guideline, the following table
illustrates the ideal pixel resolution for a full screen display
of your JPEGs.
Output Resolution
Composite, S-Video, Component 720 x 540 pixels
HDMI with HD JPEG OFF 720 x 540 pixels
HDMI with HD JPEG ON
(720p/1080i) 1920 x 1080 pixels
NOTE
These settings are the responsibility of the user. D&M
Professional can not guarantee the performance of every
display.
Regarding Wallpaper
Because the Wallpaper function of the DN-V210/V310
DVD players requires utilizing every line of the screen
(even some that may extend beyond what is actually
visible) some Wallpaper images may display differently
then they would if viewed as a JPEG.
Additionally, some pixilation (aliasing) or digital noise may
appear on the JPEG when it is stored as the wallpaper
image. This is more apparent near straight lines and in
complex images like faces. Simpler, flat, and less detailed
images will display the best.
NOTE
Some JPEGS may not be suitable as Wallpaper images.
If this is true, the wallpaper may not switch. This could be
because of the pixel resolution or color settings.
14

ITALIANODEUTSCHESPAÑOL NEDERLANDS
NOTA AGGIUNTIVA
Importante: le note seguenti descrivono le procedure
ideali di funzionamento per l’impiego di immagini JPEG
per lo sfondo.
Informazioni sui file JPEG
Molto spesso la risoluzione in pixel dello schermo è
diversa da quella dell’immagine JPEG che si intende
visualizzare. Per questo motivo la visualizzazione delle
immagini presenta spesso risultati non ottimali.
Se l’impostazione di visualizzazione non è “FULL”
(a schermo intero), si consiglia di ridurre in maniera
appropriata le dimensioni in pixel dell’immagine in modo
da consentire risultati di visualizzazione ottimali.
Inoltre, la risoluzione dell’output del video del lettore DVD
è diversa da quella del formato del video, così come
lo sono le impostazioni di output. Come linea guida, la
tabella seguente illustra la risoluzione in pixel ideale per la
visualizzazione a schermo intero delle immagini JPEG.
Output Risoluzione
Composito, S-Video, Componenti 720 x 540 pixel
HDMI con HD JPEG OFF 720 x 540 pixel
HDMI con HD JPEG ON
(720p/1080i) 1920 x 1080 pixel
NOTA
È responsabilità dell’utente provvedere alla modifica
di queste impostazioni. D&M Professional non può
garantire la completa funzionalità delle prestazioni di ogni
visualizzazione.
Informazioni sullo sfondo
La funzione dello sfondo dei lettori DVD DN-V210/V310
richiede l’utilizzo di tutte le righe dello schermo (alcune
possono estendersi anche al di là dei margini visibili).
Per questo motivo alcune immagini di sfondo potrebbero
essere visualizzate sullo schermo in maniera diversa da
come sarebbero se fossero visualizzate come JPEG.
Inoltre, nell’immagine JPEG salvata come immagine di
sfondo potrebbero apparire alcune sgranature dovute
alla pixellizzazione (aliasing). Questo fenomeno è
più evidente in prossimità di linee rette e in immagini
complesse come i volti. Immagini più semplici, uniformi
e meno dettagliate verranno visualizzate in maniera
ottimale.
NOTA
Alcune immagini JPEG potrebbero non essere adatte
come immagini di sfondo. In questi casi, lo sfondo
potrebbe non essere modificato. Questo comportamento
potrebbe essere dovuto alla risoluzione in pixel o alle
impostazioni dei colori.
APPENDIX
Hieronder vindt u een beschrijving van de ideale
gebruiksprocedures voor de functies JPEG en
achtergrond.
Over JPEG’s
Het komt heel vaak voor dat de beeldschermresolutie
en de JPEG’s die moeten worden weergegeven, een
verschillende pixelresolutie hebben. Dit kan leiden tot
minder optimale resultaten voor de weergave van de
afbeeldingen.
Als de instelling van uw beeldscherm niet is ingesteld
op “FULL”, is het aanbevolen het formaat van uw
afbeeldingen te wijzigen zodat ze overeenstemmen
met de geschikte pixelafmetingen voor optimale
weergaveresultaten.
Daarnaast is er ook een verschil tussen de resolutie van
de video-uitgangen op de dvd-speler, het videoformaat en
de uitvoerinstellingen. Als richtlijn geeft de volgende tabel
de ideale pixelresolutie aan voor de weergave van uw
JPEG’s op volledige schermgrootte.
Uitgang Resolutie
Composiet, S-Video, Component 720 x 540 pixels
HDMI met HD JPEG UIT 720 x 540 pixels
HDMI met HD JPEG AAN
(720p/1080i) 1920 x 1080 pixels
OPMERKING
Deze instellingen vallen onder de verantwoordelijkheid
van de gebruiker. Het is voor D&M Professional niet
mogelijk de prestaties van elk beeldscherm te garanderen.
Over de achtergrond
Omdat de achtergrondfunctie van de DN-V210/V310
dvd-spelers vereist dat elke lijn op het scherm wordt
gebruikt (zelfs sommige lijnen die buiten het deel
dat werkelijk zichtbaar is, vallen), kunnen sommige
achtergrondafbeeldingen anders worden weergegeven
dan wanneer ze als een JPEG zouden worden
weergegeven.
Daarnaast kan er wat pixelvorming (aliasing) of
digitale ruis verschijnen op de JPEG wanneer deze
als achtergrondafbeelding wordt opgeslagen. Dit is
duidelijker zichtbaar in rechte lijnen en in complexe
afbeeldingen, zoals gezichten. Eenvoudige, platte en
minder gedetailleerde afbeeldingen bieden de beste
weergaveresultaten.
OPMERKING
Sommige JPEG’s zullen mogelijk niet geschikt zijn
als achtergrondafbeelding. Als dat het geval is, zal de
achtergrond mogelijk niet worden omgeschakeld. Dit kan
te wijten zijn aan de pixelresolutie of de kleurinstellingen.
APÉNDICE
Tenga en cuenta que las notas siguientes explican los
procedimientos operativos ideales para la funcionalidad
JPEG y Fondo de pantalla.
Acerca de las imágenes JPEG
A menudo, la resolución de la pantalla y la resolución de
las imágenes JPEG que se desea mostrar son diferentes.
Esto puede provocar que los resultados de visualización
de las imágenes no sean óptimos.
Si la configuración de su pantalla no está establecida
en “FULL,” se recomienda cambiar el tamaño de las
imágenes para que se ajusten a las dimensiones
en píxeles apropiadas para lograr un resultado de
visualización óptimo.
Además, la resolución de la salida difiere entre las salidas
de vídeo del reproductor de DVD y el formato de vídeo,
así como las configuraciones de salida. Como pauta, la
siguiente tabla ilustra la resolución ideal en píxeles para
una visualización a pantalla completa de sus archivos
JPEG.
Salida Resolución
Compuesto, S-Video, Componentes 720 x 540 píxeles
HD JPEG OFF 720 x 540 píxeles
HDMI con HD JPEG ON
(720p/1080i)
1920 x 1080
píxeles
NOTA
Estas configuraciones son responsabilidad del usuario.
D&M Professional no puede garantizar los resultados de
todas las visualizaciones.
Acerca del fondo de pantalla
Como la función de fondo de pantalla de los
reproductores DN-V210/V310 DVD requiere la utilización
de todas las líneas de la pantalla (incluso algunas
que pueden extenderse más allá de lo que es visible
realmente), algunas imágenes de fondo de pantalla
pueden verse de forma diferente que si se visualizaran
como JPEG.
Adicionalmente puede aparecer alguna pixelación
(aliasing) o ruido digital en la imagen JPEG cuando se
almacena como imagen de fondo de pantalla. Esto es
más visible cerca de las líneas rectas y en imágenes
complejas como los rostros. Las imágenes sencillas,
planas y con menos detalles se mostrarán mejor.
NOTA
Algunos JPEG pueden no ser apropiados para imágenes
de fondo de pantalla. Si éste es el caso, no se cambiará al
fondo de pantalla. Esto puede deberse a la resolución en
píxeles o a la configuración del color.
NACHTRAG
Die nachfolgenden Hinweise erläutern die ideale
Verwendung der JPEG- und Wallpaper-Funktionen.
Informationen zu JPEGs
Häufig verfügen der Bildschirm und die anzuzeigenden
JPEGs über eine unterschiedliche Pixelauflösung.
Hierdurch kann die Anzeigequalität der Bilder
beeinträchtigt werden.
Ist die Einstellung Ihres Displays nicht „VOLL“, wird
empfohlen, dass Sie die Größe Ihrer Bilder entsprechend
den geeigneten Pixelwerten für eine optimale Wiedergabe
ändern.
Außerdem variiert die Auflösung der Ausgabe je nach
Videoausgang am DVD-Player, Bildformat sowie den
Ausgabeeinstellungen. Als Richtlinie finden Sie in der
nachfolgenden Tabelle die ideale Auflösung zur Anzeige
Ihrer JPEG-Bilder auf dem ganzen Bildschirm.
Ausgang Auflösung
Zusammengesetzt, S-Video,
Bestandteil 720 x 540 Pixel
HDMI mit HD JPEG ausgeschaltet 720 x 540 Pixel
HDMI mit HD JPEG eingeschaltet
(720p/1080i) 1920 x 1080 Pixel
HINWEIS
Diese Einstellungen unterliegen der Verantwortung des
Benutzers. D&M Professional kann nicht die Qualität jeder
Bildanzeige gewährleisten.
Informationen zu Wallpaper
Da die Wallpaper-Funktion des DN-V210/V310 DVD-
Players die Verwendung sämtlicher Bildschirmzeilen
erfordert (selbst solcher, die für den Betrachter nicht
sichtbar sind), ist es möglich, dass einige Wallpaper-Bilder
anders angezeigt werden als bei der Ansicht im JPEG-
Format.
Außerdem können deutliche Pixelstrukturen
(Treppeneffekte) oder digitales Rauschen auf dem
JPEG erkennbar sein, wenn dieses als Wallpaper-Bild
abgespeichert wird. Dies ist besonders deutlich an
geraden Linien sowie in komplexen Bildern wie Portraits
zu sehen. Einfachere, flache und weniger detailreiche
Bilder werden am besten angezeigt.
HINWEIS
Einige JPEGs eignen sich eventuell nicht als Wallpaper-
Bilder, sodass eine Umschaltung auf Wallpaper nicht
möglich ist. Der Grund hierfür kann die Pixelauflösung
oder die Farbeinstellung sein.
23

i
IMPORTANT TO SAFETY
WARNING:
To reduce the risk of fire and electric shock,
this apparatus should not be exposed to rain or
moisture and objects filled with liquids, such as
vases, should not be placed on this apparatus
CAUTION
1.Handle the power supply cord carefully
Do not damage or deform the power supply cord.
If it is damaged or deformed, it may cause electric
shock or malfunction when used. When removing
from wall outlet, be sure to remove by holding the
plug attachment and not by pulling the cord.
2.Do not open the rear cover
In order to prevent electric shock, do not open the
top cover.
If problems occur, contact your DENON DEALER.
3.Do not place anything inside
Do not place metal objects or spill liquid inside the
system.
Electric shock or malfunction may result.
Please, record and retain the Model name and serial
number of your set shown on the rating label.
Model No. DN-V210/DN-V310
Serial No.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION:
TO REDUCE THE RISK OF ELECTRIC SHOCK,
DO NOT REMOVE COVER (OR BACK). NO
USER-SERVICEABLE PARTS INSIDE. REFER
SERVICING TO QUALIFIED SERVICE
PERSONNEL.
The lightning flash with arrowhead
symbol, within an equilateral triangle,
is intended to alert the user to the
presence of uninsulated “dangerous
voltage” within the product’s enclosure
that may be of sufficient magnitude
to constitute a risk of electric shock to
persons.
The exclamation point within an
equilateral triangle is intended to
alert the user to the presence of
important operating and maintenance
(servicing) instructions in the literature
accompanying the appliance.
NOTE:
This DVD Video Player uses the semiconductor laser.
To allow you to enjoy music at a stable operation, it is
recommended to use this in a room of 5°C (41°F) ~
35°C (95°F).
LABELS (for U.S.A. model only)
CERTIFICATION
THIS PRODUCT COMPLIES WITH DHHS RULES
21 CFR SUBCHAPTER J APPLICABLE AT DATE OF
MANUFACTURE.
CAUTION:
USE OF CONTROLS OR ADJUSTMENTS OR
REFOR-MANCE OF PROCEDURES OTHER THAN
THOSE SPECIFIED HEREIN MAY RESULT IN
HAZARDOUS RADIATION EXPOSURE.
THE COMPACT DISC PLAYER SHOULD NOT BE
ADJUSTED OR REPAIRED BY ANYONE EXCEPT
PROPERLY QUALIFIED SERVICE PERSONNEL.
FCC INFORMATION
(For US customers)
1. PRODUCT
This product complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) this product may not cause harmful interference,
and (2) this product must accept any interference
received, including interference that may cause
undesired operation.
2. IMPORTANT NOTICE:
DO NOT MODIFY THIS PRODUCT
This product, when installed as indicated in the
instructions contained in this manual, meets FCC
requirements. Modification not expressly approved by
DENON may void your authority, granted by the FCC,
to use the product.
3. NOTE
This product has been tested and found to comply
with the limits for a Class B digital device, pursuant to
Part 15 of the FCC Rules. These limits are designed
to provide reasonable protection against harmful
interference in a residential installation.
This product generates, uses and can radiate radio
frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful
interference to radio communications. However, there
is no guarantee that interference will not occur in a
particular installation. If this product does cause harmful
interference to radio or television reception, which can
be determined by turning the product OFF and ON, the
user is encouraged to try to correct the interference by
one or more of the following measures:
•Reorient or relocate the receiving antenna.
•Increase the separation between the equipment
and receiver.
•
Connect the product into an outlet on a circuit
different from that to which the receiver is connected.
•Consult the local retailer authorized to distribute
this type of product or an experienced radio/TV
technician for help.
This Class B apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe B est conforme à
la norme NMB-003 du Canada.

ii
1. Read Instructions – All the safety and operating instructions
should be read before the product is operated.
2. Retain Instructions – The safety and operating instructions
should be retained for future reference.
3. Heed Warnings – All warnings on the product and in the
operating instructions should be adhered to.
4. Follow Instructions – All operating and use instructions should
be followed.
5. Cleaning – Unplug this product from the wall outlet before
cleaning. Do not use liquid cleaners or aerosol cleaners.
6. Attachments – Do not use attachments not recommended by
the product manufacturer as they may cause hazards.
7. Water and Moisture – Do not use this product near water – for
example, near a bath tub, wash bowl, kitchen sink, or laundry
tub; in a wet basement; or near a swimming pool; and the
like.
8. Accessories–Donotplacethisproductonanunstablecart,stand,
tripod, bracket, or table. The product may fall, causing serious
injury to a child or adult, and serious damage to the product. Use
only with a cart, stand, tripod, bracket, or table recommended
by the manufacturer, or sold with the product. Any mounting
of the product should follow the manufacturer’s instructions,
and should use a mounting
accessory recommended by the
manufacturer.
9. A product and cart combination
should be moved with care.
Quick stops, excessive force, and
uneven surfaces may cause the
product and cart combination to
overturn.
10. Ventilation – Slots and openings in the cabinet are provided for
ventilation and to ensure reliable operation of the product and
to protect it from overheating, and these openings must not be
blocked or covered. The openings should never be blocked by
placing the product on a bed, sofa, rug, or other similar surface.
This product should not be placed in a built-in installation such
as a bookcase or rack unless proper ventilation is provided or
the manufacturer’s instructions have been adhered to.
11. Power Sources – This product should be operated only from
the type of power source indicated on the marking label. If you
are not sure of the type of power supply to your home, consult
your product dealer or local power company. For products
intended to operate from battery power, or other sources, refer
to the operating instructions.
12. Grounding or Polarization – This product may be equipped
with a polarized alternating-current line plug (a plug having one
blade wider than the other). This plug will fit into the power
outlet only one way. This is a safety feature. If you are unable
to insert the plug fully into the outlet, try reversing the plug. If
the plug should still fail to fit, contact your electrician to replace
your obsolete outlet. Do not defeat the safety purpose of the
polarized plug.
FIGURE A
EXAMPLE OF ANTENNA GROUNDING
AS PER NATIONAL
ELECTRICAL CODE ANTENNA
LEAD IN
WIRE
GROUND
CLAMP
ELECTRIC
SERVICE
EQUIPMENT
ANTENNA
DISCHARGE UNIT
(NEC SECTION 810-20)
GROUNDING CONDUCTORS
(NEC SECTION 810-21)
GROUND CLAMPS
POWER SERVICE GROUNDING
ELECTRODE SYSTEM
(NEC ART 250, PART H)
NEC - NATIONAL ELECTRICAL CODE
13. Power-Cord Protection – Power-supply cords should be routed
so that they are not likely to be walked on or pinched by items
placed upon or against them, paying particular attention to
cords at plugs, convenience receptacles, and the point where
they exit from the product.
15. Outdoor Antenna Grounding – If an outside antenna or cable
system is connected to the product, be sure the antenna or
cable system is grounded so as to provide some protection
against voltage surges and built-up static charges. Article
810 of the National Electrical Code, ANSI/NFPA 70, provides
information with regard to proper grounding of the mast
and supporting structure, grounding of the lead-in wire to an
antenna discharge unit, size of grounding conductors, location
of antenna-discharge unit, connection to grounding electrodes,
and requirements for the grounding electrode. See Figure A.
16. Lightning – For added protection for this product during a
lightning storm, or when it is left unattended and unused
for long periods of time, unplug it from the wall outlet and
disconnect the antenna or cable system. This will prevent
damage to the product due to lightning and power-line
surges.
17. Power Lines – An outside antenna system should not be
located in the vicinity of overhead power lines or other electric
light or power circuits, or where it can fall into such power
lines or circuits. When installing an outside antenna system,
extreme care should be taken to keep from touching such
power lines or circuits as contact with them might be fatal.
18. Overloading – Do not overload wall outlets, extension cords, or
integral convenience receptacles as this can result in a risk of
fire or electric shock.
19. Object and Liquid Entry – Never push objects of any kind into
this product through openings as they may touch dangerous
voltage points or short-out parts that could result in a fire or
electric shock. Never spill liquid of any kind on the product.
20.
Servicing – Do not attempt to service this product yourself as
opening or removing covers may expose you to dangerous
voltage or other hazards. Refer all servicing to qualified
service personnel.
21. Damage Requiring Service – Unplug this product from the
wall outlet and refer servicing to qualified service personnel
under the following conditions:
a) When the power-supply cord or plug is damaged,
b) If liquid has been spilled, or objects have fallen into the
product,
c) If the product has been exposed to rain or water,
d) If the product does not operate normally by following the
operating instructions. Adjust only those controls that
are covered by the operating instructions as an improper
adjustment of other controls may result in damage and will
often require extensive work by a qualified technician to
restore the product to its normal operation,
e) If the product has been dropped or damaged in any way,
and
f) When the product exhibits a distinct change in performance
– this indicates a need for service.
22. Replacement Parts – When replacement parts are required,
be sure the service technician has used replacement parts
specified by the manufacturer or have the same characteristics
as the original part. Unauthorized substitutions may result in
fire, electric shock, or other hazards.
23. Safety Check – Upon completion of any service or repairs
to this product, ask the service technician to perform safety
checks to determine that the product is in proper operating
condition.
24. Wall or Ceiling Mounting – The product should be mounted to
a wall or ceiling only as recommended by the manufacturer.
25. Heat – The product should be situated away from heat sources
such as radiators, heat registers, stoves, or other products
(including amplifiers) that produce heat.
SAFETY INSTRUCTIONS

iii
CAUTION: (English)
To completely disconnect this product from the mains,
disconnect the plug from the wall socket outlet.
The mains plug is used to completely interrupt the power
supply to the unit and must be within easy access by the
user.
VORSICHT: (Deutsch)
Um dieses Gerät vollständig von der Stromversorgung
abzutrennen, trennen Sie bitte den Netzstecker von der
Wandsteckdose ab.
DieHauptsteckerwerdenverwendet,umdieStromversorgung
zum Gerät völlig zu unterbrechen; er muss für den Benutzer
gut und einfach zu erreichen sein.
PRECAUTION: (Français)
Pour déconnecter complètement ce produit du courant
secteur, débranchez la prise de la prise murale.
La prise secteur est utilisée pour couper complètement
l’alimentation de l’appareil et l’utilisateur doit pouvoir y
accéder facilement.
ATTENZIONE: (Italiano)
Per scollegare definitivamente questo prodotto dalla rete
di alimentazione elettrica, togliere la spina dalla relativa
presa.
La spina di rete viene utilizzata per interrompere
completamente l’alimentazione all’unità e deve essere
facilmente accessibile all’utente.
PRECAUCIÓN: (Español)
Para desconectar completamente este producto de la
alimentación eléctrica, desconecte el enchufe del enchufe
de la pared.
El enchufe de la alimentación se utiliza para interrumpir
por completo el suministro de alimentación a la unidad y
debe de encontrarse en un lugar al que el usuario tenga
fácil acceso.
VOORZICHTIGHEID: (Nederlands)
Om de voeding van dit product volledig te onderbreken
moet de stekker uit het stopcontact worden getrokken.
De netstekker wordt gebruikt om de stroomtoevoer naar
het toestel volledig te onderbreken en moet voor de
gebruiker gemakkelijk bereikbaar zijn.
FÖRSIKTIHETSMÅTT: (Svenska)
Koppla loss stickproppen från eluttaget för att helt skilja
produkten från nätet.
Stickproppen används för att helt bryta strömförsörjningen
till apparaten, och den måste vara lättillgänglig för
användaren.
Copyrights (English)
2 It is prohibited by law to reproduce, broadcast, rent or
play discs in public without the consent of the
copyright holder.
Urheberrechte (Deutsch)
2 Die Reproduktion, Ausstrahlung, der Verleih sowie die
öffentliche Wiedergabe von Discs erfordern die
Zustimmung des Urheberrechtinhabers.
Droits d’auteur (Français)
2 La reproduction, la diffusion, la location, le prêt ou la
lecture publique de ces disques sont interdits sans le
consentement du détenteur des droits d’auteur.
Copyright (Italiano)
2 La duplicazione, la trasmissione, il noleggio e la
riproduzione dei dischi in pubblico senza l’autorizzazione
scritta del titolare dei diritti di copyright sono vietati dalla
legge.
Derechos de Autor (Español)
2 De acuerdo con las leyes está prohibido reproducir,
emitir, alquilar o interpretar discos en público sin la
autorización del propietario de los derechos de autor.
Auteurstrechten (Nederlands)
2 Het zonder toestemming van de auteursrechthebbenden
reproduceren, uitzenden, verhuren of in het openbaar
afspelen
van discs is wettelijk verboden.
Upphovsrätt (Svenska)
2 Enligt lagen är det förbjudet att återge, utsända, hyra ut
eller spela skivor för allmän publik med mindre
tillstånd från ägaren till upphovsrätten först har
inhämtats.

iv
NOTE ON USE / HINWEISE ZUM GEBRAUCH /
OBSERVATIONS RELATIVES A L’UTILISATION / NOTE SULL’USO /
NOTAS SOBRE EL USO / ALVORENS TE GEBRUIKEN / OBSERVERA
• Avoid high temperatures.
Allow for sufficient heat dispersion when
installed on a rack.
• Vermeiden Sie hohe Temperaturen.
Beachten Sie, daß eine ausreichend
Luftzirkulation gewährleistet wird, wenn das
Gerät auf ein Regal gestellt wird.
• Eviter des températures élevées
Tenir compte d’une dispersion de chaleur
suffisante lors de l’installation sur une étagère.
• Evitate di esporre l’unità a temperature alte.
Assicuratevi che ci sia un’adeguata
dispersione del calore quando installate l’unità
in un mobile per componenti audio.
• Evite altas temperaturas
Permite la suficiente dispersión del calor
cuando está instalado en la consola.
• Vermijd hoge temperaturen.
Zorg voor een degelijk hitteafvoer indien het
apparaat op een rek wordt geplaatst.
• Undvik höga temperaturer.
Se till att det finns möjlighet till god
värmeavledning vid montering i ett rack.
• Keep the set free from moisture, water, and
dust.
• Halten Sie das Gerät von Feuchtigkeit, Wasser
und Staub fern.
• Protéger l’appareil contre l’humidité, l’eau et
lapoussière.
• Tenete l’unità lontana dall’umidità, dall’acqua e
dalla polvere.
• Mantenga el equipo libre de humedad, agua y
polvo.
• Laat geen vochtigheid, water of stof in het
apparaat binnendringen.
• Utsätt inte apparaten för fukt, vatten och
damm.
• Do not let foreign objects in the set.
• Keine fremden Gegenstände in das Gerät
kommen lassen.
• Ne pas laisser des objets étrangers dans l’
appareil.
• E’ importante che nessun oggetto è inserito
all’interno dell’unità.
• No deje objetos extraños dentro del equipo.
• Laat geen vreemde voorwerpen in dit apparaat
vallen.
• Se till att främmande föremål inte tränger in i
apparaten.
• Handle the power cord carefully.
Hold the plug when unplugging the cord.
• Gehen Sie vorsichtig mit dem Netzkabel um.
Halten Sie das Kabel am Stecker, wenn Sie
den Stecker herausziehen.
• Manipuler le cordon d’alimentation avec
précaution.
Tenir la prise lors du débranchement du
cordon.
• Manneggiate il filo di alimentazione con cura.
Agite per la spina quando scollegate il cavo
dalla presa.
• Maneje el cordón de energía con cuidado.
Sostenga el enchufe cuando desconecte el
cordón de energía.
• Hanteer het netsnoer voorzichtig.
Houd het snoer bij de stekker vast wanneer
deze moet worden aan- of losgekoppeld.
• Hantera nätkabeln varsamt.
Håll i kabeln när den kopplas från el-uttaget.
• Unplug the power cord when not using the
set for long periods of time.
• Wenn das Gerät eine längere Zeit nicht
verwendet werden soll, trennen Sie das
Netzkabel vom Netzstecker.
• Débrancher le cordon d’alimentation lorsque l’
appareil n’est pas utilisé pendant de longues
périodes.
• Disinnestate il filo di alimentazione quando
avete l’intenzione di non usare il filo di
alimentazione per un lungo periodo di tempo.
• Desconecte el cordón de energía cuando no
utilice el equipo por mucho tiempo.
• Neem altijd het netsnoer uit het stopkontakt
wanneer het apparaat gedurende een lange
periode niet wordt gebruikt.
• Koppla ur nätkabeln om apparaten inte
kommer att användas i lång tid.
• Do not let insecticides, benzene, and thinner
come in contact with the set.
• Lassen Sie das Gerät nicht mit Insektiziden,
Benzin oder Verdünnungsmitteln in Berührung
kommen.
• Ne pas mettre en contact des insecticides, du
benzène et un diluant avec l’appareil.
• Assicuratevvi che l’unità non venga in contatto
con insetticidi, benzolo o solventi.
• No permita el contacto de insecticidas,
gasolina y diluyentes con el equipo.
• Laat geen insektenverdelgende middelen,
benzine of verfverdunner met dit apparaat in
kontakt komen.
• Se till att inte insektsmedel på spraybruk,
bensen och thinner kommer i kontakt med
apparatens hölje.
• Never disassemble or modify the set in any
way.
• Versuchen Sie niemals das Gerät auseinander
zu nehmen oder auf jegliche Art zu verändern.
• Ne jamais démonter ou modifier l’appareil d’
une manière ou d’une autre.
• Non smontate mai, nè modificate l’unità in
nessun modo.
• Nunca desarme o modifique el equipo de
ninguna manera.
• Nooit dit apparaat demonteren of op andere
wijze modifiëren.
• Ta inte isär apparaten och försök inte bygga
om den.
• Do not obstruct the ventilation holes.
• Die Belüftungsöffnungen dürfen nicht
verdeckt werden.
• Ne pas obstruer les trous d’aération.
• Non coprite i fori di ventilazione.
• No obstruya los orificios de ventilación.
• De ventilatieopeningen mogen niet worden
beblokkeerd.
• Täpp inte till ventilationsöppningarna.
* (For sets with ventilation holes)

v
CAUTION
•The ventilation should not be impeded by covering the ventilation openings with items, such as newspapers, tablecloths,
curtains, etc.
• No naked flame sources, such as lighted candles, should be placed on the apparatus.
• Attention should be drawn to the environmental aspects of battery disposal.
• The apparatus shall not be exposed to dripping or splashing for use.
• No objects filled with liquids, such as vases, shall be placed on the apparatus.
• The socket-outlet shall be installed near the equipment and shall be easily accessible.
•DECLARATION OF CONFORMITY
We declare under our sole responsibility that this product,
to which this declaration relates, is in conformity with the
following standards:
EN60065, EN55013, EN55020, EN61000-3-2 and
EN61000-3-3.
Following the provisions of 73/23/EEC, 2004/108/EC and
93/68/EEC Directive.
•ÜBEREINSTIMMUNGSERKLÄRUNG
Wir erklären unter unserer Verantwortung, daß dieses
Produkt, auf das sich diese Erklärung bezieht, den
folgenden Standards entspricht:
EN60065, EN55013, EN55020, EN61000-3-2 und
EN61000-3-3.
Entspricht den Verordnungen der Direktive 73/23/EEC,
2004/108/EC und 93/68/EEC.
•DECLARATION DE CONFORMITE
Nous déclarons sous notre seule responsabilité que l’
appareil, auquel se réfère cette déclaration, est conforme
aux standards suivants:
EN60065, EN55013, EN55020, EN61000-3-2 et
EN61000-3-3.
D’après les dispositions de la Directive 73/23/EEC,
2004/108/EC et 93/68/EEC.
•DICHIARAZIONE DI CONFORMITÀ
Dichiariamo con piena responsabilità che questo prodotto,
al quale la nostra dichiarazione si riferisce, è conforme alle
seguenti normative:
EN60065, EN55013, EN55020, EN61000-3-2 e
EN61000-3-3.
In conformità con le condizioni delle direttive 73/23/EEC,
2004/108/EC e 93/68/EEC.
QUESTO PRODOTTO E’ CONFORME
AL D.M. 28/08/95 N. 548
•DECLARACIÓN DE CONFORMIDAD
Declaramos bajo nuestra exclusiva responsabilidad que
este producto al que hace referencia esta declaración, está
conforme con los siguientes estándares:
EN60065, EN55013, EN55020, EN61000-3-2 y
EN61000-3-3.
Siguiendo las provisiones de las Directivas 73/23/EEC,
2004/108/EC y 93/68/EEC.
•EENVORMIGHEIDSVERKLARING
Wij verklaren uitsluitend op onze verantwoordelijkheid dat
dit produkt, waarop deze verklaring betrekking heeft, in
overeenstemming is met de volgende normen:
EN60065, EN55013, EN55020, EN61000-3-2 en
EN61000-3-3.
Volgens de bepalingen van de Richtlijnen 73/23/EEC,
2004/108/EC en 93/68/EEC.
•ÖVERENSSTÄMMELSESINTYG
Härmed intygas helt på eget ansvar att denna produkt,
vilken detta intyg avser, uppfyller följande standarder:
EN60065, EN55013, EN55020, EN61000-3-2 och
EN61000-3-3.
Enligt stadgarna i direktiv 73/23/EEC, 2004/108/EC och
93/68/EEC.
CLASS 1 LASER PRODUCT
LUOKAN 1 LASERLAITE
KLASS 1 LASERAPPARAT
ADVARSEL: USYNLIG LASERSTRÅLING VED ÅBNING, NÅR
SIKKERHEDSAFBRYDERE ER UDE AF FUNKTION.
UNDGÅ UDSAETTELSE FOR STRÅLING.
VAROITUS! LAITTEEN KÄYTTÄMINEN MUULLA KUIN TÄSSÄ
KÄYTTÖOHJEESSA MAINITULLA TAVALLA SAATTAA
ALTISTAA KÄYTTÄJÄN TURVALLISUUSLUOKAN 1
YLITTÄVÄLLE NÄKYMÄMTTÖMÄLLE
LASERSÄTEILYLLE.
VARNING– OM APPARATEN ANVÄNDS PÅ ANNAT SÄTT ÄN I
DENNA BRUKSANVISNING SPECIFICERATS, KAN
ANVÄNDAREN UTSÄTTAS FÖR OSYNLIG
LASERSTRÅLNING SOM ÖVERSKRIDER GRÄNSEN
FÖR LASERKLASS 1.
,
CLASS 1
LASER PRODUCT ,
,,
ATTENZIONE: QUESTO APPARECCHIO E’
DOTATO DI DISPOSITIVO OTTICO CON RAGGIO
LASER.
L’USO IMPROPRIO DELL’APPARECCHIO
PUO’ CAUSARE PERICOLOSE ESPOSIZIONI A
RADIAZIONI!
CAUTION:
USE OF CONTROLS OR ADJUSTMENTS
OR PERFORMANCE OF PROCEDURES
OTHER THAN THOSE SPECIFIED HEREIN
MAY RESULT IN HAZARDOUS RADIATION
EXPOSURE.
THIS PRODUCT SHOULD NOT BE
ADJUSTED OR REPAIRED BY ANYONE
EXCEPT PROPERLY QUALIFIED SERVICE
PERSONNEL.

vi
A NOTE ABOUT RECYCLING: (English)
This product’s packaging materials are recyclable and can be reused. Please dispose of any materials in accordance with the
local recycling regulations.
When discarding the unit, comply with local rules or regulations.
Batteries should never be thrown away or incinerated but disposed of in accordance with the local
regulations concerning chemical waste.
This product and the accessories packed together constitute the applicable product according to the WEEE
directive except batteries.
HINWEIS ZUM RECYCLING: (Deutsch)
Das Verpackungsmaterial dieses Produktes ist zum Recyceln geeignet und kann wiederverwendet werden. Bitte entsorgen
Sie alle Materialien entsprechend der örtlichen Recycling-Vorschriften.
Beachten Sie bei der Entsorgung des Gerätes die örtlichen Vorschriften und Bestimmungen.
Die Batterien dürfen nicht in den Hausmüll geworfen oder verbrannt werden; bitte geben Sie die Batterien
gemäß den örtlichen Bestimmungen an den Sammelstellen oder Sondermüllplätzen ab.
Dieses Produkt zusammen mit den Zubehörteilen ist das geltende Produkt der WEEE-Direktive, davon
ausgenommen sind die Batterien.
REMARQUE CONCERNANT LE RECYCLAGE : (Français)
Le matériel d’emballage de cet appareil est recyclable et réutilisable. Veuillez disposer de tout matériau conformément à la
réglementation de recyclage en vigueur dans votre pays.
Lorsque vous mettez cet appareil au rebut, respectez les lois ou réglementations locales.
Les piles ne doivent jamais être jetées à la poubelle ou incinérées, mais mises au rebut conformément aux
réglementations locales concernant les déchets chimiques.
Ce produit et les accessoires emballés ensemble sont des produits conformes à la directive DEEE sauf
pour les piles.
NOTA RELATIVA AL RICICLAGGIO : (Italiano)
I materiali di imballaggio di questo prodotto sono riutilizzabili e riciclabili. Smaltire i materiali conformemente alle normative
nazionali sul riciclaggio.
Per smaltire l’unità, osservare la normativa in vigore nel luogo di utilizzo.
Non gettare le pile, né bruciarle, ma smaltirle conformemente alla normativa locale sui rifiuti chimici.
Il prodotto e gli accessori inclusi nell’imballaggio rientrano nella direttiva WEEE, ad eccezione delle pile.
ACERCA DEL RECICLAJE: (Español)
Los materiales de embalaje de este producto son reciclables y se pueden volver a utilizar. Elimine estos materiales de acuerdo
con la normativa de reciclaje local.
Cuando se deshaga de la unidad, cumpla con la reglamentación y la normativa locales.
No tire ni arroje las pilas al fuego. Elimínelas siguiendo la normativa local relacionada con los desperdicios
químicos.
Este producto y los accesorios que lo acompañan constituyen el producto aplicable de la directiva RAEE a
excepción de las pilas.
EEN OPMERKING OVER RECYCLING: (Nederlands)
Het verpakkingsmateriaal van dit product is recyclebaar en kan opnieuw worden gebruikt. Gelieve het materiaal weg te
gooien in overeenstemming met wettelijke recyclingvoorschriften.
Als u het apparaat weggooit, houdt u dan aan de plaatselijke wetten en regels.
Batterijen mogen nooit worden weggegooid of verbrand, maar moeten worden weggegooid in
overeenstemming met de lokale wetgeving betreffende chemisch afval.
Dit product en de bijgeleverde accessoires vertegenwoordigen het toepasbare product volgens de WEEE-
richtlijn behalve de batterijen.
ANGÅENDE ÅTERVINNING: (Svenska)
Produktens emballage är återvinningsbart. Kassera det enligt lokala återvinningsbestämmelser.
Kassera enheten i överensstämmelse med lokala regler och föreskrifter.
Batterier får aldrig kastas i soporna eller brännas, utan ska kasseras enligt lokala bestämmelser för kemiskt
avfall.
Denna produkt och de medföljande tillbehören förutom batterierna, uppfyller gällande WEEE-direktiv.

1
ENGLISH
— TABLE OF CONTENTS —
z FEATURES............................................................. 2
x DISCS.................................................................... 3
c CAUTIONS ON HANDLING DISCS ....................... 5
v CONNECTIONS..................................................... 6
b PART NAMES AND FUNCTIONS ........................ 14
n REMOTE CONTROL UNIT .................................. 16
m LOADING DISCS ................................................. 19
, CHANGING THE DEFAULT SETTINGS................ 20
. PLAYBACK .......................................................... 38
⁄0 PLAYING REPEATEDLY....................................... 42
⁄1 PLAYING TRACKS IN THE DESIRED ORDER ..... 45
⁄2 PLAYING TRACKS IN THE RANDOM ORDER .... 49
⁄3 USING THE ON-SCREEN DISPLAY..................... 50
⁄4
USING THE MULTIPLE AUDIO, SUBTITLE AND
ANGLE FUNCTIONS ............................................... 51
⁄5 USING THE MENUS............................................ 54
⁄6 PLAYING IN THE ZOOM MODE ......................... 56
⁄7 MP3/WMA FILE PLAYBACK ............................... 57
⁄8 PLAYING STILL PICTURE FILES (JPEG format) .... 59
⁄9 DivX FILE PLAYBACK.......................................... 62
¤0 ADVANCED FUNCTION ...................................... 66
¤1 TROUBLESHOOTING ......................................... 74
¤2 MAIN SPECIFICATIONS...................................... 75

2
ENGLISH
ACCESSORIES
Please check to make sure the following items are included with the main unit in the carton:
q Audio cord......................................................................1
w Video cord......................................................................1
e Video cord (COMPONENT)............................................1
r Remote control unit (RC-963) ........................................1
t R03/AAA batteries .........................................................2
y Power supply cord .........................................................1
u User guide......................................................................1
i Service station list..........................................................1
o Rackmount kit................................................................1
TOPMENU
/PBC MENU
RETURN
ANGLE
DISPLAY
STOP
STILL/PAUSE
PLAY
RC-963
DVD POWER
OPEN/CLOSE
A-B REPEAT
REPEAT
AUDIO
SUBTITLE
ENTER
SETUP NTSC/PAL
ZOOM SLIDE SHOW
SKIP
CALL
RANDOM
CLEAR
PROG/
DIRECT
SLOW/SEARCH
123
456
789
0+10
qwe
rty
z
FEATURES
1. High precision 96 kHz 24-bit D/A converter
The DN-V210/DN-V310 is equipped with a 24-bit D/A
converter for faithful D/A conversion of the high quality
24-bit data. This further enhances such aspects of
audio performance as the S/N ratio, dynamic range and
distortion and makes full use of the possibilities for high
quality sound provided by a high number of bits and high
sampling rates.
2. Progressive Scan function
The DN-V210/DN-V310 is equipped with a progressive
scan function achieving playback with high picture quality.
Movies and other DVD software can be recreated with a
picture quality near that of the original.
3. Advanced function
(1) KEY LOCK
Operation of the buttons on the front panel (aside from
the POWER button) is disabled to prevent accidental
operation.
(2) IR REMOTE LOCK
Operation of the buttons on the remote controller is
disabled to prevent accidental operation.
(3) HIDE OSD
Switch the OSD and the display of the icons that
appear on the screen on and off.
(4) AUTO PLAY
By this function the player can start playback
automatically after power on.
4. Serial remote control (DN-V310 only)
Commands can be sent to the DVD player and the status
requested and sent to the host via RS-232C.
5. Change the image on the DVD Player wallpaper
The image on the DVD player wallpaper can be changed
at the user‘s discretion.

3
ENGLISH
x
x DISCS
• The types of discs listed on the table below can be used
on the DN-V210/DN-V310.
The marks are indicated on the disc labels or jackets.
Usable
discs Mark (logo) Recorded
signals Disc size
DVD video
DVD audio
(NOTE 1)
R
R
R W
R W
Digital audio
+
Digital video
(MPEG2)
12 cm
DVD-R
DVD-RW
(NOTE 2) 8 cm
Video CD
Digital audio
+
Digital video
(MPEG1)
12 cm
8 cm
CD
CD-R
CD-RW
(NOTE 3)
DTS-CD Recordable
ReWritable
Digital audio
MP3
Digital picture
(JPEG)
12 cm
8 cm
Picture CD Digital picture
(JPEG) 12 cm
WMA Digital audio 12 cm
DivX®
Digital audio
+
Digital video
(MPEG4)
12 cm
WMA
Windows
Media
Audio
Digital audio 12 cm
■The following types of discs cannot be played on the
DN-V210/DN-V310:
• For USA model:
DVDs with region numbers other than “1” or “ALL”
• For Europe model:
DVDs with region numbers other than “2” or “ALL”
• DVD-ROM/RAMs (For DVD-ROM discs, data files in
DivX®3.11, 4.12 and 5.1 format can be played)
• SACD (only CD layered can be played)
• CD-ROMs (Data files in MP3, JPEG, WMA, and DivX®
3.11, 4.12 and 5.1 can be played)
• CDVs (Only the audio part can be played.)
• Photo CDs
NOTE 1: Video part which based on DVD-video specification
only can be played.
NOTE 2: Playing DVD-R and DVD-RW discs
DVD-R and DVD-RW discs recorded in video
format on a DVD recorder can be played on the
DN-V210/DN-V310.
Discs that have not be finalized cannot be played.
Depending on the disc’s recording status, the
disc may not be accepted or may not be played
normally (the picture or sound may be not be
smooth, etc.).
NOTE 3: According to recording quality, some CD-R/RW
cannot be played.
NOTE 4: “Windows Media™”, “Windows®” are a trademarks
of Microsoft Corporation, Inc.
■Disc terminology
• Titles and chapters (DVD-videos)
DVD-videos are divided into several large sections called
“titles” and smaller sections called “chapters”.
Numbers are allotted to these sections. These numbers
are called “title numbers” and “chapter numbers”.
For example:
Title 1 Title 2
Chapter 1 Chapter 2 Chapter 3 Chapter 1 Chapter 2
• Tracks (video and music CDs)
Video and music CDs are divided into sections called
“tracks”.
Numbers are allotted to these sections. These numbers
are called “track numbers”.
For example:
Track 1 Track 2 Track 3 Track 4 Track 5
• Playback control (PBC) (video CDs)
Video CDs including the words “playback control” on
the disc or jacket are equipped with a function for
displaying menus on the TV screen for selecting the
desired position, displaying information, etc., in dialog
fashion.
In this manual, playing video CDs using such menus is
referred to “menu playback”.
Video CDs with playback control can be used on the DN-
V210/DN-V310.

4
ENGLISH
■Patent information
Manufactured under license from Dolby Laboratories.
“Dolby” and the double-D symbol are trademarks of Dolby
Laboratories.
Manufactured under license under U.S. Patent #:5,451,942
& other U.S. and worldwide patents issued & pending.
DTS and DTS Digital Out are registered trademarks and
the DTS logos and Symbol are trademarks of DTS, Inc. ©
1996-2007 DTS, Inc. All Rights Reserved.
DivX, DivX Certified, and associated logos are trademarks
of DivX, Inc. and are used under license.
“HDMI”, the“HDMI” logo and “High Definition Multimedia
Interface” are trademarks or registerd trademark of HDMI
Licensing LLC.
NOTE:
• This DVD player is designed and manufactured to
respond to the Region Management Information that
is recorded on a DVD disc.
If the Region number described on the DVD disc does
not correspond to the Region number of this DVD
player, this DVD player cannot play this disc.
For USA model:
The Region number for this DVD player is
1. 1
2
For Europe model:
The Region number for this DVD player is
2.
CAUTIONS ON INSTALLATION
For heat dispersal, leave at least 0.2 m/8 inch of space
between the top, back and sides of this unit and the wall or
other components.
• Do not obstruct the ventilation holes.
0.2m
(8ins.)
0.2m (8ins.)
0.2m
(8ins.)
Wall
0.2m
(8ins.)

5
ENGLISH
c
c CAUTIONS ON HANDLING DISCS
Discs
Only the discs including the marks shown on page 5 can be
played on the DN-V210/DN-V310.
Note, however, that discs with special shapes (heart-shaped
discs, hexagonal discs, etc.) cannot be played on the DN-
V210/DN-V310. Do not attempt to play such discs, as they
may damage the player.
Holding Discs
Avoid touching the surface of discs when loading and
unloading them.
Be careful not to get fingerprints
on the signal surface (the side
which shines in rainbow colors).
Cleaning Discs
■Fingerprints or dirt on the disc may lower sound and
picture quality or cause breaks in playback. Wipe off
fingerprints or dirt.
■Use a commercially available disc cleaning set or a soft
cloth to wipe off fingerprints or dirt.
Wipe gently from the
middle outwards. Do not wipe with a circular motion.
NOTE:
• Do not use record spray or antistatic. Also do not use
volatile chemicals such as benzene or thinner.
Record
spray Thinner Benzene
Cautions on Handling Discs
• Do not get fingerprints, grease or dirt on discs.
• Be especially careful not to scratch discs when removing
them from their cases.
• Do not bend discs.
• Do not heat discs.
• Do not enlarge the center hole.
• Do not write on the labeled (printed) side with a ball-point
pen or a pencil.
• Water droplets may form on the surface if the disc is
moved suddenly from a cold place to a warm one. Do not
use a hairdryer, etc., to dry the disc.
Cautions on Storing Discs
• Always eject discs after playing them.
• Keep discs in their cases to protect them from dust,
scratches and warping.
• Do not put discs in the following places:
1.Places exposed to direct sunlight for long periods of
time
2.Humid or dusty places
3.Places exposed to heat from heaters, etc.
Cautions on Loading Discs
• Only load one disc at a time. Loading one disc on top of
another may result in damage or scratch the discs.
• Load 8 cm discs securely in the disc guide, without using
an adapter. If the disc is not properly loaded, it may slip out
of the guide and block the disc tray.
• Be careful not to let your fingers get caught when the disc
tray is closing.
• Do not place anything but discs in the disc tray.
• Do not load cracked or warped discs or discs that have
been fixed with adhesive, etc.
• Do not use discs on which the adhesive part of cellophane
tape or glue used to attach the label is exposed, or discs
with traces of tape or labels that have been peeled off.
Such discs may get stuck inside the player, resulting in
damage.

6
ENGLISH
v
v CONNECTIONS
NOTES:
• Read the manuals of all the components when making connections.
• Keep the power cord unplugged until all connections have been completed.
• If the power is on when connections are made, noise may be generated and damage the speakers.
• Be sure to connect the left and right channels properly, L (left) to L, R (right) to R.
• Plug the power cord securely into the power outlet. Incomplete connection may result in noise.
• Binding the power cord together with connection cords may result in humming or noise.
(1) Connecting a TV
• Use the included audio video cord to connect the TV’s video input connector and audio input connectors to the DN-V210/
DN-V310’s VIDEO OUT or S-VIDEO OUT and AUDIO OUT.
VIDEO IN
S-VIDEO IN
AUDIO IN
LR
DN-V210/DN-V310
S-Video output connector
The video signals are divided
into color (C) and brightness
(Y) signals, achieving a clearer
picture.
If the TV is equipped with an
S-Video input connector, we
recommend connecting it to
the DN-V210/DN-V310’s S-
Video output connector using a
commercially available S-Video
connection cord.
To power outlet
TV
NOTES:
• Connect the DN-V210/DN-V310’s video outputs to the TV either directly or through an AV amplifier. Do not connect it via
a VCR (video cassette recorder). Some discs contain copy prohibit signals. If such discs are played via a VCR, the copy
prohibit system may cause disturbance in the picture.
• Set the “TV TYPE” in “VIDEO SETUP” in “SETUP“ to comply with your TV’s video format. When the TV is NTSC
formatted, set to NTSC. When the TV is PAL formatted, set to PAL.
(See page 24.)
• Set the “TV ASPECT” in “VIDEO SETUP” in “SETUP” to comply with your TV’s aspect. (See page 24.)
• No audio signals are output from the DN-V210/DN-V310’s “AUDIO OUT” connector when discs recorded in DTS are
played.

7
ENGLISH
(2) Connecting to a TV or Monitor Equipped with Color Component Input Connectors
AUDIO IN
LR COMPONENT VIDEO IN
YP
B/CBPR/CR
Color component output connectors (PR/CR, PB/CB and Y)
The red (PR/CR), blue (PB/CB) and brightness (Y) signals are output independently, achieving more
faithful reproduction of the colors.
• The color component input connectors may be marked differently on some TVs or monitors (PR,
PB and Y/R-Y, B-Y and Y/CR, CB and Y, etc.). For details, refer to the TV’s operating instructions.
• If your TV is compatible with progressive scan, press the “SHIFT” and “HDMI RES.” button on the
front panel so that “P.SCAN” lights on the display. This results in a high quality picture with little
flickering.
DN-V210/DN-V310
TV
NOTES:
• Use the three commercially available video cords to connect the DN-V210/DN-V310’s color component output
connectors to the TV or monitor.
• Set the “TV TYPE“ in “VIDEO SETUP“ in “SETUP“ to comply with your TV’s video format. When the TV is NTSC
formatted, set to NTSC. When the TV is PAL formatted, set to PAL. (See page 24.)
• Set the “480p/576p” in “HDMI RES.” in “VIDEO SETUP” in “SETUP” to comply with Progressive TV.
• Set the “TV ASPECT” in “VIDEO SETUP” in “SETUP” to comply with your TV’s aspect. (See page 24)
• No audio signals are output from the DN-V210/DN-V310’s “AUDIO OUT” connector when discs recorded in DTS are
played.
• When VIDEO OUT in the VIDEO SETUP menu is set to “RGB,” component video is not output. (Europe model only)

8
ENGLISH
(3) Connecting to a TV with 21-pin SCART Terminal (For only Europe model)
• Use the commercially 21-pin SCART cable to connect the TV’s 21-pin SCART terminal to the DN-V210/DN-V310’s 21-pin
SCART terminal (AV1).
• Select “RGB” for the video output setting at the setup screen video setup.
• CVBS and RGB signal are output from the SCART terminal (AV1).
When “RGB” is selected, no video signals are output from the component output.
When “RGB” is selected, CVBS and RGB are output.
DN-V210/DN-V310
To power outlet
TV
21-pin SCART terminal
NOTES:
• Some discs contain copy prohibit signals. If such discs are played via a VCR, the copy prohibit system may cause
disturbance in the picture.
• Set the “TV TYPE“ in “VIDEO SETUP“ in “SETUP“ to comply with your TV’s video format. When the TV is NTSC
formatted, set to NTSC. When the TV is PAL formatted, set to PAL. (See page 24.)

9
ENGLISH
(4) Connecting to a AV amplifier with a Built-in decoder
When DVDs recorded in Dolby Digital or DTS are played, Dolby Digital or DTS bitstream signals are output from the DVD
player’s digital audio output connectors. If a Dolby Digital or DTS decoder is connected, you can achieve sound with the
power and sense of presence of a movie theater or concert hall.
DN-V210/DN-V310
Digital audio input
connector (OPTICAL)
Optical fiber cable
Front speaker (left)
Center speaker
Front speaker (right)
Subwoofer
Surround speaker (left)
AV amplifier with a built-in decoder
(AV control center)
Surround speaker (right)
To power outlet
NOTE:
• Harsh noise that could harm your ears or damage the speakers is generated when a DVD recorded in DTS is played
while using a decoder, etc., that is not DTS-compatible.
■Connecting an optical fiber cable to the digital audio input connector (OPTICAL)
Line up in proper direction
Remove the dust cap, line up the cable in the proper directly, then insert it securely as far as it goes.

10
ENGLISH
■Sound output from the DN-V210/DN-V310’s digital audio output connectors
In the case of bit stream output
Settings
DIGITAL OUTPUT
Audio recording format NORMAL PCM
DVD video
Dolby Digital Dolby Digital bitstream 2 channels PCM
(48 kHz / 16 bit)
DTS DTS bitstream —
MPEG Audio 2 channels PCM
(48 kHz / 16 bit) 2 channels PCM (48 kHz / 16 bit)
In the case of PCM output
Settings
96 k LPCM OUT
Audio recording format 96 kHz 96 k > 48 k
Copy protection ON Copy protection OFF
DVD video Linear
PCM
48 kHz / 16 ~ 24 bit No output data (*1) 48 kHz / 16 ~ 24 bit PCM 48 kHz / 16 bit PCM
96 kHz / 16 ~ 24 bit No output data (*2) 96 kHz / 16 ~ 24 bit PCM 48 kHz / 16 bit PCM
Video CD MPEG 1 44.1 kHz / 16 bit PCM 44.1 kHz / 16 bit PCM
Music CD 44.1 kHz / 16 bit Linear PCM 44.1 kHz / 16 bit PCM 44.1 kHz / 16 bit PCM
MP3 CD MP 3 (MPEG-1 Audio Layer 3) 32 ~ 48 kHz / 16 bit PCM 32 ~ 48 kHz / 16 bit PCM
*1 Only 48 kHz/16 bit sources are output.
*2 When playing copyright-protected linear PCM DVDs, in consideration of copyrights, no digital signals are output for
sources exceeding 48 kHz/16 bits. When playing such sources, either set to “96k
> 48k” or make analog connections.
• Linear PCM audio is a signal recording format used for music CDs.
While signals are recorded at 44.1 kHz/16 bit for music CDs, for DVDs they are recorded at 48 kHz/16 bit to 96kHz/24 bit,
providing higher sound quality than music CDs.
• When you want to listen to output in DTS, set DIGITAL OUTPUT to NORMAL (bit stream). (See page 26.)

11
ENGLISH
(5) Connecting to a Digital Recorder (MD Recorder, DAT Deck, etc.)
✽Set the “AUDIO SETUP” default setting as shown below. (See page 26.)
• “DIGITAL OUTPUT” →“PCM”
“96k LPCM OUT” →“96k>48k”
Playing DVDs with incorrect settings may result noise that could damage your ears or the speakers.
89
B
DN-V210/DN-V310
Optical fiber cable
Digital audio input
connector (OPTICAL)
To power outlet
(6) Connecting to a Stereo Component
DN-V210/DN-V310 Stereo component
To power outlet
Analog audio input
connector
NOTES:
• When connecting to a stereo device with 2 audio channels
qFor sources recorded in multiple channels, analog signals downmixed into two channels are output. (For sources for
which downmixing is prohibited, only the FL and FR channels are output.)
wSet “96kLPCM OUT” at “AUDIO SETUP” under “SETUP” to “96k>48k” (See page 26). (When set to “96k>48k”,
analog audio signals converted to 48 kHz or less are output for linear PCM sources.)