Denon AVR-5805 User manual

The AVR-5805MK2 incorporates a host of new technologies, circuits, and functions to achieve DENON’s ultimate aim for all its amps, which is to recreate the producer’s
original intent with absolute fidelity. The "New DDSC-Digital" surround processor, developed around DENON’s design concepts for high-quality sound reproduction, is
now equipped with the latest 32-bit floating-point DSP as well as newly-developed AL24 processing, high-performance 24-bit/192-kHz D/A converter, and other much
improved technologies. The AVR-5805MK2 is also endowed with a wide range of features such as a hefty10-channel power amp capable of bi-amp drive, new Auto Set-up
utilizing multi-point measurement and analysis to support the entire listening area, Room EQ (equalizer), advanced digital audio interfaces including DENON Link and
IEEE 1394, support for THX Ultra2, multi-zone system, newly-developed analog video scaler to 1080p, DVI/HDMI video selector, and full up/down video conversion.
These new technologies, circuits, and features enable the AVR-5805MK2 to reproduce the original design intent of content producers from a wide range of sources in such
areas as surround sound, multi-channel audio, 2-channel stereo, and video.
■ Audio Section
• 'New DDSC-Digital,' for dramatically improved processing performance
The New DDSC(Dynamic Discrete Surround Circuit)- Digital is a high-quality sur-
round sound reproduction circuit designed by DENON, and forms the core of the
design concept that DENON pursues for all its A/V amps: to faithfully reproduce
the original intent of content producers. DENON has succeeded in developing a
fully discrete design for the New DDSC-Digital in which high-performance ICs are
used in independent blocks to form a signal processor that reproduces surround
sound, and the discrete design ensures that all channels are endowed with identi-
cal response and quality of sound.
-New 32-bit floating point DSP
Three of the latest 32-bit floating point DSPs for the decoder for main zone. A lat-
est-generation 32-bit floating point SHARC DSP for the second zone.
-24-bit/192-kHz D/A Converter
The latest high-accuracy 24-bit/192-kHz D/A converter has been employed for the
audio DAC. The AVR-5805 has 8 of these D/A converters for 16 circuits, achiev-
ing differential drive for all 16 channels and digital-to-analog conversion with wide
dynamic range at a high S/N.
-High-performance A/D Converter
A high-performance A/D converter of 24-bit/192-kHz quality has been used to sig-
nificantly boost S/N and dynamic range.
• 'Advanced AL24 Processing,' the latest technology for high sound quality
• DENON Link, enabling high-speed, high-grade digital signal transmission
• IEEE 1394 digital interface - 2 ports
• Large-output Power Amp Section and Power Supply Configuration, for
stable high-power output
• 10-channel power amp, supporting multiple uses
Since the 10 speaker terminals can be assigned to any channel, the AVR-5805
can be used to enjoy home theater entertainment in the following configurations:
- One dynamic 9.1-channel surround system in a single room
- 5.1-channel theater environments in two different rooms, both operating simulta-
neously
- Multi-zone system: a 7.1-channel theater in the main room, a 2.1-channel envi-
ronment in a second room, and a monaural environment in a small third room.
- "Bi-amp" system: Front (L/R) and Center speakers are bi-wired in a 7.1-channel
theater to improve playback quality in the front for enhanced listening enjoyment.
• Stabilized, independent power supplies for each circuit
• Chassis construction to surpress internal/external vibration
• Pure Direct mode, for the pure enjoyment of music in high-quality sound
• Variable Gain Volume and Pre-amp
• New Auto Set-up and Room EQ, Featuring MultEQ from Audyssey, for
overall listening area support
• Full support for the most advanced surround playback formats
- Dolby Digital EX - Dolby Digital - Dolby Pro Logic IIx
- Dolby Headphone - DTS-ES - DTS 96/24
- DTS Neo:6 - DTS - HDCD
• THX, THX Surround EX, THX Ultra2
• Original surround modes from DENON
■ Video Section
• Newly-developed video circuitry, for high picture quality
-5 HDMI/1 DVI digital video inputs; 1 HDMI/1 DVI digital video outputs
-Component video switching
-Video up/down conversion
-I/P conversion and scaling to 1080p
-High-speed, high-accuracy 12-bit/216-MHz video DAC
-TBC (Time Base Correction) technology is used
when converting composite video or S-video signals to component video
AVR-5805MK2
A/V Surround Receiver TENTATIVE
NEW MODEL INFORMATION
AVR5805.qxd 04.11.29 18:43 Page 1

NEW MODEL INFORMATION AVR-5805MK2
*Design and specifications are subject to change without notice.
*“Dolby”, “Dolby Digital-EX”, “Pro Logic IIx”, and the double-D device are
registered trademarks of Dolby Laboratories Licensing Corporation.
*“DTS”, “DTS-ES ES” and “Neo:6” are trademarks of Digital Theater System, Inc.
*HDCD ®,High Definition Compatible Digital ® and Microsoft® are either
registered trademarks or trademarks of Microsoft Corporation in the United
States and/or other countries.
*”DCDi™” is a trademark of Faroudja, a division of Genesis Microchip Inc.
*Audyssey MultEQ is a trademark of Audyssey Laboratories. MultEQ and
the Audyssey MultEQ logo are trademarks of Audyssey Laboratories, Inc.
*NSV and Sub Alias Filter are registered trademarks of Analog Devices, Inc.
DENON ELECTRONICS (USA), LLC.
19C CHAPIN ROAD, SUITE 205 PINE BROOK, N.J. 07058-9385 USA
TEL: [phone] www.usa.denon.com
DENON CANADA INC.
505 APPLE CREEK BLVD, UNIT 5, MARKHAM, ONTARIO, CANADA L3R 5B1
TEL: [phone] www.denon.ca
DENON, LTD.
KAYABACHO TOWER 14F, 1-21-2 SHINKAWA, CHUO-KU, TOKYO 104-0033 JAPAN
16151204 A
■ Expandability
• Analog EXT IN terminal
• 4-zone, multi-room support
• Ethernet and RS-232C terminals
■ Other Functions
• Auto Surround Back Channels ON function, for auto-detection of sup-
porting sources
• Auto Surround mode
• New design and ease-of-use
-Front panel's large display.
-A cursor key and Butons on the front panel
• EL remote controller for easy operation
• On-screen display, for easier, error-free operation
• Variable subwoofer crossover switching
(40/60/80/90/100/110/120/150/200/250 Hz)
• Muting level settings (∞/-40dB/-20db)
• Audio Delay function (max. 6 frames)
■ Input/Output Terminals For Every A/V System
• Audio Inputs
13 Sets Analog Inputs ..............
PHONO, CD, (TUNER), CDR/TAPE, DVD, VDP, TV,
DBS, VCR-1, VCR-2, VCR-3, VCR-4, V.AUX(FRONT) ,
1 Set 10-ch Analog EXT. Input .......... FRONT L/R, CENTER,
SURROUND (A) L/R, SURROUND (B) L/R,
SURROUND BACK L/R, SUBWOOFER
1 Set 6-ch Analog EXT. Input ............ FRONT L/R, CENTER,
SURROUND L/R, SUBWOOFER
12 Sets Digital Input .................
OPTICAL x6 (incl. FRONT x 1)
COAXIAL x6
Denon Link x1
• Audio Outputs
10 Sets Analog PRE Output ... FRONT L/R, CENTER,
SURROUND(A) L/R, SURROUND(B) L/R,
SURROUND BACK L/R, SUBWOOFER
5 Sets Analog REC Output .... VCR-1, VCR-2, VCR-3, VCR-4, CDR/TAPE
3 Set Analog Multi Zone PRE Output
.... ZONE2 L/R, ZONE3 L/R, ZONE4 L/R
3 Sets Digital Output .............. OPTICAL x3
• Video Inputs
6 Sets Component Video Input .. VIDEO-1, VIDEO-2, VIDEO-3, VIDEO-4, VIDEO-5
9 Sets S-Video Input .............. DVD, VDP, TV, DBS, VCR-1,
VCR-2, VCR-3, VCR-4, V.AUX(FRONT)
9 Sets Composite Input .......... DVD, VDP, TV, DBS, VCR-1,
VCR-2, VCR-3, VCR-4, V.AUX(FRONT)
Video Outputs
3 Set Component Video Output .. MONITOR x3 (incl. 1 set for ZONE2)
7 Sets S-Video Output ........... VCR-1, VCR-2, VCR-3, VCR-4, MONITOR,
ZONE2, ZONE3
7 Sets Composite Output ....... VCR-1, VCR-2, VCR-3, VCR-4, MONITOR,
ZONE2, ZONE3
■ Specifications
• Power Amplifier Section
Rated output *THD figures are power amp stage values.
Front...................................................... 170 W + 170 W (8 ohms, 20 Hz - 20 kHz, 0.05 % THD)
200 W + 200 W ( 6 ohms, 20 Hz - 20 kHz, 0.05 % THD )
Center ................................................... 170 W (8 ohms, 20 Hz - 20 kHz, 0.05 % THD)
200 W ( 6 ohms, 20 Hz - 20 kHz, 0.05 % THD )
Surround (A, B)...................................
170 W + 100 W (8 ohms, 20 Hz - 20 kHz, 0.05 % THD)
200 W + 200 W ( 6 ohms, 20 Hz - 20 kHz, 0.05 % THD )
Surround Back..................................... 170 W + 170 W (8 ohms, 20 Hz - 20 kHz, 0.05 % THD)
200 W + 200 W ( 6 ohms, 20 Hz - 20 kHz, 0.05 % THD )
• Preamplifier Section
Analog
Input sensitivity / imepdance 200mV/47kohms
Frequency response .............. 10Hz-100kHz: +0,-3dB (Direct mode)
S/N ........................................ 105 dB(Direct mode)
Rated output ......................... 1.2 V
Digital
D/A output ............................. 2.0 V
Phono
Input sensitivity / impedance.. 2.5 mV
RIAA deviation ...................... +/-1dB(20Hz to 20kHz)
Rated output ......................... 150 mV
• Video Section
Frequency response
Composite video/S-video ...... 5 Hz-10 MHz (+0,-3dB)
Component video .................. 5 Hz-100 MHz (+0,-3dB)
• FM Section
Tuning frequency range...................... 87.5 - 107.9 MHz
Usable sensitivity................................ 1.0 µV (11.2 dBf)
• AM Section
Tuning frequency range...................... 520 - 1710 kHz
Usable sensitivity................................ 18 µV
General
• General
Power supply ........................... AC120V, 60Hz
Power consumption .................. 13 A
Dimensions .............................. 434 (W) x 280 (H) x 505 (D) mm
(17-3/32” x 11-1/32” x 19-7/8”)
Weight ...................................... 44.0kg (97 lbs)
AVR5805.qxd 04.11.29 18:43 Page 2
Now with 5 HDMI inputs