Denon AVR-S770H User manual

AVR-S770H
INTEGRATED NETWORK AV RECEIVER
■
UIC
ar
■
UI
DENON ®

1
Welcome
Thank you for choosing a Denon AVR.
Use the SetupAssistantfunction to help configure the settings for this unitwhen you first set it up.
Follow the guidance displayed on the TV screen connected to this unit to configure the settings.
This manualdescribesthe procedure up until starting the Setup Assistant.
Please do not return this product to the
store. If you need help...
~ -Sc-an- th _e_Q_R code or visitsupport.denon.com/
for setup help, technical support, warranty assistance, or
[ ✓ _,_ c - ustomer support contact information.

Before you begin
Required for setup Optional
TV
Speakercables LAN cable
or
HDM I®cable
Subwoofer cable Wi-Fi®
router
Speakers
• When connecting this unit to a device that is compatible with the DeepColor, 4K, ARC and eARC functions, use a"High Speed HDM Icable
with Ethernet" that displays the HDMI logo.
• When connecting this unit to a device that is compatible with 8K and 4K 120Hz video, use a certified "Ultra High Speed HDMI cable". Ifyou
use a differentHDMI cable, the video may not display or other problems may occur.
2

3
What's in the box
Quick StartGuide Cable labels
Safetyinstructions
<>
AVR
Notes on radio
<>
FM indoorantenna
Warranty
~
(for North America AM loop antenna
model only)
/
Sound calibration
microphone
Sound ca libration
microphonestand
Remote control
(RC-1257)
2x R03/ AAA batteries
~rnrn~
~
.
~
• The included sound calibration microphonestand is convenient for performing speakercalibration. Using your own tripod or the supplied
Sound calibration microphonestand enables settings to be automaticallyconfigured to the optimum listening environment, providing
exceptionallyhigh performance.

..
Attach the included cable labels
The supplied cable labels include labels for the speaker and HDMI cables.
Attach acable label to each cable that matches the speakers and HDMI devices being connected, as shown below.
This makes it easy to identifyand properlyconnect the cables between your components.
ES
4

5
Setup
0 Rotate the antennas
Rotate the antenna upwards for the best possible
reception.
[
l
~ > - ~
. . -1 · m:;6¢164
• Theantennas are required for both Bluetooth and Wi-Fi
functions.
Optional
Ifyou are connecting the AVR to a wired network, connect an
Ethernetcable (notincluded) between the AVR and your router.
Do not connect the Ethernetcable if you are connecting the
AVR to awireless network.
............
Router
0
0
0 LAN port
0 t::J-'"""
0

8 Connect the power cord
Place the AVR near your 1V and connect the power cord.
ES
u \l
TV
0000 0000
0 0 • 0
AVR
Powercord
6

7
e Connect the AVR to your TV
HDMIO
TV
.~ (ARC/eARC)
~<>
AVR {Rear panel)
HDMIIN
(ARC/eARC)
l=)
HDMI cable
Using a high qualityHDMIcable*, connect one end to the HDMI
port labeled "eARC" or "ARC" on yourTV. Connect the other
end to the HDMI OUT TV port on your AVR.
What is ARC and eARC?
Audio Return Channel or "ARC" sends audio back to the AVR
using the same HDMIcable that sends video from your AVR
to your TV. This allows your AVR to process the sound from
your TV's built-in tuner and apps. TVs with an Enhanced Audio
Return Channel or "eARC" port provide additional support for
high bitrate multichannel audio (DolbyAtmos, DolbyTrueHD,
DTS-HD and DTS:X). Please refer to your TV owner'smanual for
details abouteARC support for your particular model.
* For 4K TVs, we recommend using an HDMI cable labeled
"High Speed" and "with Ethernet" .
* For BK TVs, we recommend using an HDMI cable labeled
"Ultra High Speed".

e Turn on the TV
TV remote control
Select the appropriate HDMI
input on your TV
HDMI
TV remote contro l
FR
ES
8

9
Install batteries in the AVR
remote control
:f,
• Batteries can betaken out in reversed order.
8 Turn on the AVR
Press<!) on the remote control.
0 0
0 0 0 0
0000
0
0 0 0
E3
I J I I
0 0 @
ooo
:@ o
0 0
000
0000
0000