Denver CAD-381 User manual

INSTRUCTION MANUAL
CAR STEREO CD/CDR/CDRW/MP3/WMA PLAYER
WITH PLL FM STEREO RADIO
RDS
FRONT AUX IN
BLUETOOTH FUNCTION IN MOBILE PHONE
FLIP DOWN AND DETACHABLE FRONT PANEL
CAD-381 BLUETOOTH
1 2 3 1511 1214
139 8 5 6 7 10 18 19 20 21 22 23 24
4(1-6)
17
16

E1
LOCATION OF PARTS AND CONTROLS
1. POWER ON/OFF ( )
2. FUNCTION SELECT BUTTON: BASS/TREBLE/BALANCE/FADER/TA SEEK/
MASK DPI/RETUNE/AUDIO DSP/LOUDNESS/ESP/BEEP/SEEK/STEREO/
LOCAL/VOL LAST
3. VOL UP/VOL DOWN FOR BASS/TREBLE/BALANCE/FADER/TA SEEK/
MASK DPI/RETUNE/AUDIO DSP/LOUDNESS/ESP/BEEP/SEEK/STEREO/
LOCAL/VOL LAST
4. PRESET STATIONS (1,2,3,4,5,6)
5. ‘AF’ function (ALTERNATIVE FREQUENCIES)
6. ‘TA’ function (TRAFFIC ANNOUNCEMENT)
7. ‘PTY’ function (PROGRAM TYPE)
8. DISPLAY (DISP)
9. MODE BUTTON (MODE)
10. BAND (BAND)
11. AUTOMATIC OR MANUAL TUNING
(FREQ UP OR FREQ DOWN )
12. AUTO SEEK SEARCH TUNING (A/PS)
13. ‘SCAN’ AUTOMATIC TUNING CONTROL (SCN)
14. OPEN FRONT PANEL ( )
15. LCD DISPLAY
16. CD EJECT BUTTON ( )
17. CD SLOT
18. PAUSE BUTTON
19. INTRO BUTTON (Preview all Tracks)
20. REPEAT BUTTON
21. RANDOM BUTTON
22, 23. + 10 TRACK SEARCH DOWN/UP
24. FRONT AUX IN
25. RESET BUTTON
26. POWER INDICATOR LED
1 2 3 1511 1214
139 8 5 6 7 10 18 19 20 21 22 23 24
4(1-6)
17
16
1 2 3 1511 1214
139 8 5 6 7 10 18 19 20 21 22 23 24
4(1-6)
17
16
25 26
RESET

E2
53mm
182mm
3
2
182mm
53mm
1
2
134
INSTALLATION
PRECAUTIONS
• Choose the mounting location carefully so that the unit will not interfere with the normal
driving functions of the driver.
• Avoid installing the unit where it would be subject to high temperatures, such as from direct
sunlight or hot air from the heater, or where it would be subject to dust, dirt or excessive
vibration.
• Use only the supplied mounting hardware for a safe and secure installation.
• Be sure to remove the front panel before installing the unit.
NOTE : Inclination angle for car radio installation must not
exceed 30˚ otherwise the front panel will not open.
Note: Keep the release key in the safe place as you may need it in future to remove the unit
from the car.
Bend these
claws, if necessay
release screw and
bracket
ISO CONNECTOR
RCA Jack Line Out (Grey): Red (right) White (left)
RCA Jack Line In (Black): Red (right) White (left)
External Microphone: (Black)
CONNECTOR A
1.
2.
3.
4. MEMORY +12V
5. AUTO ANTENNA OUTPUT
6.
7. +12V (TO IGNITION KEY)
8. GROUND
Note: (connector A no. 7) must be connected by car ignition key in order to avoid that car
battery becomes weak when the car will be not used for long period.
CONNECTOR B
1. REAR RIGHT SPEAKER (+)
2. REAR RIGHT SPEAKER (-)
3. FRONT RIGHT SPEAKER (+)
4. FRONT RIGHT SPEAKER (-)
5. FRONT LEFT SPEAKER (+)
6. FRONT LEFT SPEAKER (-)
7. REAR LEFT SPEAKER (+)
8. REAR LEFT SPEAKER (-)
Maintenance
FUSE REPLACEMENT
If the fuse blows, check the power connection and replace the fuse. If the fuse blows again after the
replacement, there may be an internal malfunction. In this case, consult your nearest repairing center.
Warning
Use the specied amperage fuse for each lead. Use of a higher amperage fuse may cause serious damage.
B
12
34
56
78
12
34
56
78
A

E3
1
2
10
7
1
2
3
4
4
4
5
5
6
6
8
9
TO SUPPORT THE UNIT
Detaching and attaching the front panel
The front panel of this unit can be detached in order to prevent the unit from being stolen.
FOLDING DOWN AND DETACHING/ATTACHING THE FRONT PANEL
Before detaching the front panel, be sure to press the button (1) OFF rst.
Then press the button (14), let the Front Panel arrive in horizontal position and detach the
panel by pulling it towards you as illustrated.
Notes:
•Do not press the front panel hard against the unit when attaching it. It can be easily at-
tached by pressing it lightly against the unit.
•When you carry the front panel with you, put it in the supplied front panel case.
•Do not press hard or give excessive pressure to the display window of the front panel when
attaching it to the unit.
1. UNIT
2. RELEASE CASE
3. DASH BOARD
4. HEX NUT
5. LOCK WASHER
6. PLAIN WASHER
7. CAR BODY
8. REAR SUPPORT STRAP
9. TAPPING SCREW
10. M5 X 15 HEX BOLT
Dashboard
<10°

E4
TA SEEK
SEL
2 sec.
SEL SEL
MASK DPI
SEL
ESP
ESP12 / ESP 45
LOCAL/DX
LOCAL
SEL
TA SEEK
SEL
2 sec.
TA SEEK / TA ALARM
TA SEEK
SEL MASK DPI SEL
2 sec.
MASK DPI / MASK ALL
TA SEEK
SEL RETUNE SEL
RETUNE DSP
SEL
MASK DPI
SEL
TA SEEK
SEL
2 sec.
SEL SEL
MASK DPI
SEL RETUNE DSP
SEL
TA SEEK
SEL
2 sec.
SEL DSP ONMASK DPI SEL RETUNE
SEL
2 sec.
RETUNE L / RETUNE S
STEREO/MONO
STEREO
SEL
POP M --- ROCK M --- CLASS M --- FLAT M --- DSP OFF
SEL SEEK1 / SEEK 2SEEK
LOUD
LOUD ON/OFF
TA SEEK
SEL
2 sec.
SEL LOUD
SEL
MASK DPI
SEL SEL
RETUNE DSP
SEL ESP
ON/OFF
SEL
SEL
BEEP
TA SEEK
SEL
2 sec.
SEL LOUD
SEL
MASK DPI
SEL SEL
RETUNE DSP
SEL ESP
SEL BEEP
SEL SEEK
TA SEEK
SEL
2 sec.
SEL LOUD
SEL
MASK DPI
SEL SEL
RETUNE DSP
SEL ESP
SEL BEEP
STEREO
SEL
SEL SEEK
TA SEEK
SEL
2 sec.
SEL LOUD
SEL
MASK DPI
SEL SEL
RETUNE DSP
SEL ESP
SEL BEEP
LOCAL
SEL
STEREO
SEL
SEL SEEK
TA SEEK
SEL
2 sec.
SEL LOUD
SEL
MASK DPI
SEL SEL
RETUNE DSP
SEL ESP
SEL BEEP VOL LAST /
VOL ADJ
VOL LAST
SEL VOL
VOL
VOL
VOL
VOL
VOL
VOL
VOL
VOL
VOL
VOL
TA SEEK
SEL
2 sec.
SEL SEL
MASK DPI
SEL
ESP
ESP12 / ESP 45
LOCAL/DX
LOCAL
SEL
TA SEEK
SEL
2 sec.
TA SEEK / TA ALARM
TA SEEK
SEL MASK DPI SEL
2 sec.
MASK DPI / MASK ALL
TA SEEK
SEL RETUNE SEL
RETUNE DSP
SEL
MASK DPI
SEL
TA SEEK
SEL
2 sec.
SEL SEL
MASK DPI
SEL RETUNE DSP
SEL
TA SEEK
SEL
2 sec.
SEL DSP ONMASK DPI SEL RETUNE
SEL
2 sec.
RETUNE L / RETUNE S
STEREO/MONO
STEREO
SEL
POP M --- ROCK M --- CLASS M --- FLAT M --- DSP OFF
SEL SEEK1 / SEEK 2SEEK
LOUD
LOUD ON/OFF
TA SEEK
SEL
2 sec.
SEL LOUD
SEL
MASK DPI
SEL SEL
RETUNE DSP
SEL ESP
ON/OFF
SEL
SEL
BEEP
TA SEEK
SEL
2 sec.
SEL LOUD
SEL
MASK DPI
SEL SEL
RETUNE DSP
SEL ESP
SEL BEEP
SEL SEEK
TA SEEK
SEL
2 sec.
SEL LOUD
SEL
MASK DPI
SEL SEL
RETUNE DSP
SEL ESP
SEL BEEP
STEREO
SEL
SEL SEEK
TA SEEK
SEL
2 sec.
SEL LOUD
SEL
MASK DPI
SEL SEL
RETUNE DSP
SEL ESP
SEL BEEP
LOCAL
SEL
STEREO
SEL
SEL SEEK
TA SEEK
SEL
2 sec.
SEL LOUD
SEL
MASK DPI
SEL SEL
RETUNE DSP
SEL ESP
SEL BEEP VOL LAST /
VOL ADJ
VOL LAST
SEL
VOL
VOL
VOL
VOL
VOL
VOL
VOL
VOL
VOL
VOL
VOL
TA SEEK
SEL
2 sec.
SEL SEL
MASK DPI
SEL
ESP
ESP12 / ESP 45
LOCAL/DX
LOCAL
SEL
TA SEEK
SEL
2 sec.
TA SEEK / TA ALARM
TA SEEK
SEL MASK DPI SEL
2 sec.
MASK DPI / MASK ALL
TA SEEK
SEL RETUNE SEL
RETUNE DSP
SEL
MASK DPI
SEL
TA SEEK
SEL
2 sec.
SEL SEL
MASK DPI
SEL RETUNE DSP
SEL
TA SEEK
SEL
2 sec.
SEL DSP ONMASK DPI SEL RETUNE
SEL
2 sec.
RETUNE L / RETUNE S
STEREO/MONO
STEREO
SEL
POP M --- ROCK M --- CLASS M --- FLAT M --- DSP OFF
SEL SEEK1 / SEEK 2SEEK
LOUD
LOUD ON/OFF
TA SEEK
SEL
2 sec.
SEL LOUD
SEL
MASK DPI
SEL SEL
RETUNE DSP
SEL ESP
ON/OFF
SEL
SEL
BEEP
TA SEEK
SEL
2 sec.
SEL LOUD
SEL
MASK DPI
SEL SEL
RETUNE DSP
SEL ESP
SEL BEEP
SEL SEEK
TA SEEK
SEL
2 sec.
SEL LOUD
SEL
MASK DPI
SEL SEL
RETUNE DSP
SEL ESP
SEL BEEP
STEREO
SEL
SEL SEEK
TA SEEK
SEL
2 sec.
SEL LOUD
SEL
MASK DPI
SEL SEL
RETUNE DSP
SEL ESP
SEL BEEP
LOCAL
SEL
STEREO
SEL
SEL SEEK
TA SEEK
SEL
2 sec.
SEL LOUD
SEL
MASK DPI
SEL SEL
RETUNE DSP
SEL ESP
SEL BEEP VOL LAST /
VOL ADJ
VOL LAST
SEL VOL
VOL
VOL
VOL
VOL
VOL
VOL
VOL
VOL
VOL
VOL
TA SEEK
SEL
2 sec.
SEL SEL
MASK DPI
SEL
ESP
ESP12 / ESP 45
LOCAL/DX
LOCAL
SEL
TA SEEK
SEL
2 sec.
TA SEEK / TA ALARM
TA SEEK
SEL MASK DPI SEL
2 sec.
MASK DPI / MASK ALL
TA SEEK
SEL RETUNE SEL
RETUNE DSP
SEL
MASK DPI
SEL
TA SEEK
SEL
2 sec.
SEL SEL
MASK DPI
SEL RETUNE DSP
SEL
TA SEEK
SEL
2 sec.
SEL DSP ONMASK DPI SEL RETUNE
SEL
2 sec.
RETUNE L / RETUNE S
STEREO/MONO
STEREO
SEL
POP M --- ROCK M --- CLASS M --- FLAT M --- DSP OFF
SEL SEEK1 / SEEK 2SEEK
LOUD
LOUD ON/OFF
TA SEEK
SEL
2 sec.
SEL LOUD
SEL
MASK DPI
SEL SEL
RETUNE DSP
SEL ESP
ON/OFF
SEL
SEL
BEEP
TA SEEK
SEL
2 sec.
SEL LOUD
SEL
MASK DPI
SEL SEL
RETUNE DSP
SEL ESP
SEL BEEP
SEL SEEK
TA SEEK
SEL
2 sec.
SEL LOUD
SEL
MASK DPI
SEL SEL
RETUNE DSP
SEL ESP
SEL BEEP
STEREO
SEL
SEL SEEK
TA SEEK
SEL
2 sec.
SEL LOUD
SEL
MASK DPI
SEL SEL
RETUNE DSP
SEL ESP
SEL BEEP
LOCAL
SEL
STEREO
SEL
SEL SEEK
TA SEEK
SEL
2 sec.
SEL LOUD
SEL
MASK DPI
SEL SEL
RETUNE DSP
SEL ESP
SEL BEEP VOL LAST /
VOL ADJ
VOL LAST
SEL VOL
VOL
VOL
VOL
VOL
VOL
VOL
VOL
VOL
VOL
VOL
TA SEEK
SEL
2 sec.
SEL SEL
MASK DPI
SEL
ESP
ESP12 / ESP 45
LOCAL/DX
LOCAL
SEL
TA SEEK
SEL
2 sec.
TA SEEK / TA ALARM
TA SEEK
SEL MASK DPI SEL
2 sec.
MASK DPI / MASK ALL
TA SEEK
SEL RETUNE SEL
RETUNE DSP
SEL
MASK DPI
SEL
TA SEEK
SEL
2 sec.
SEL SEL
MASK DPI
SEL RETUNE DSP
SEL
TA SEEK
SEL
2 sec.
SEL DSP ONMASK DPI SEL RETUNE
SEL
2 sec.
RETUNE L / RETUNE S
STEREO/MONO
STEREO
SEL
POP M --- ROCK M --- CLASS M --- FLAT M --- DSP OFF
SEL SEEK1 / SEEK 2SEEK
LOUD
LOUD ON/OFF
TA SEEK
SEL
2 sec.
SEL LOUD
SEL
MASK DPI
SEL SEL
RETUNE DSP
SEL ESP
ON/OFF
SEL
SEL
BEEP
TA SEEK
SEL
2 sec.
SEL LOUD
SEL
MASK DPI
SEL SEL
RETUNE DSP
SEL ESP
SEL BEEP
SEL SEEK
TA SEEK
SEL
2 sec.
SEL LOUD
SEL
MASK DPI
SEL SEL
RETUNE DSP
SEL ESP
SEL BEEP
STEREO
SEL
SEL SEEK
TA SEEK
SEL
2 sec.
SEL LOUD
SEL
MASK DPI
SEL SEL
RETUNE DSP
SEL ESP
SEL BEEP
LOCAL
SEL
STEREO
SEL
SEL SEEK
TA SEEK
SEL
2 sec.
SEL LOUD
SEL
MASK DPI
SEL SEL
RETUNE DSP
SEL ESP
SEL BEEP VOL LAST /
VOL ADJ
VOL LAST
SEL
VOL
VOL
VOL
VOL
VOL
VOL
VOL
VOL
VOL
VOL
VOL
1. POWER ON/OFF ( )
By pressing this key, the unit is on or off.
This unit is turned on by pressing any key.
2. FUNCTION SELECT BUTTON: BASS/TREBLE/BALANCE/FADER / TA SEEK/MASK DPI/RETUNE/
AUDIO DSP/LOUDNESS/ESP/BEEP/SEEK/STEREO/LOCAL/VOL LAST
When pressed short, it is activated as selecting mode of electric volume.
VOL ---- BASS ---- TREB ---- BAL ---- FADER ---- VOL
TA SEEK/TA ALARM
When press the SEL button for more than 2 seconds, it is activated as selecting mode of these
function.
TA SEEK Mode or TA ALARM mode is selected by
VOLVOL
or
VOLVOL
.
- TA SEEK mode:
When newly turned station does not receive TP information for 5 sec., the radio retunes to next station
which has not the same station (PI) as the last station, but has the TP information.
In TA seek mode, the current station can be changed to the completely different station because the unit
searches TP station when the eld strength of the current station is very weak, or the current station has
no TP signal.
- TA ALARM mode:
Any automatic retune mode is not activated, just can hear Beep sound.
MASK DPI
When press the SEL button for more than 2 seconds, it is activated as selecting mode of these
function.
MASK DPI: masked only the AF which has different PI.
MASK ALL: masked the AF which has different PI and NO RDS signal with eld strength.
RETUNE L / S CONTROLS (2)
When press the SEL button for more than 2 seconds, it is activated as selecting Retune mode.
RETUNE L: Select 90 seconds as the initial time of automatic TA search.
RETUNE S: Select 30 seconds as initial time.
AUDIO DSP CONTROLS
When press the SEL button for more than 2 seconds, it is activated as selecting mode of these
function.
DSP can be selected by VOL UP and DOWN key.
POP M---ROCK M---CLASS---FLAT M---DSP OFF
LOUDNESS CONTROLS
When press the SEL button for more than 2 seconds, it is activated as selecting mode of these
function.
LOUD ON/OFF mode is selected by
VOLVOL
or
VOLVOL
. The bass and treble response will be boosted.
ESP MODE (2)
When press the SEL button for more than 2 seconds, it is activated as 12 sec. or 45 sec. of ESP mode
can be selected.
TA SEEK
SEL
2 sec.
SEL SEL
MASK DPI
SEL
ESP
ESP12 / ESP 45
LOCAL/DX
LOCAL
SEL
TA SEEK
SEL
2 sec.
TA SEEK / TA ALARM
TA SEEK
SEL MASK DPI SEL
2 sec.
MASK DPI / MASK ALL
TA SEEK
SEL RETUNE SEL
RETUNE DSP
SEL
MASK DPI
SEL
TA SEEK
SEL
2 sec.
SEL SEL
MASK DPI
SEL RETUNE DSP
SEL
TA SEEK
SEL
2 sec.
SEL DSP ONMASK DPI SEL RETUNE
SEL
2 sec.
RETUNE L / RETUNE S
STEREO/MONO
STEREO
SEL
POP M --- ROCK M --- CLASS M --- FLAT M --- DSP OFF
SEL SEEK1 / SEEK 2SEEK
LOUD
LOUD ON/OFF
TA SEEK
SEL
2 sec.
SEL LOUD
SEL
MASK DPI
SEL SEL
RETUNE DSP
SEL ESP
ON/OFF
SEL
SEL
BEEP
TA SEEK
SEL
2 sec.
SEL LOUD
SEL
MASK DPI
SEL SEL
RETUNE DSP
SEL ESP
SEL BEEP
SEL SEEK
TA SEEK
SEL
2 sec.
SEL LOUD
SEL
MASK DPI
SEL SEL
RETUNE DSP
SEL ESP
SEL BEEP
STEREO
SEL
SEL SEEK
TA SEEK
SEL
2 sec.
SEL LOUD
SEL
MASK DPI
SEL SEL
RETUNE DSP
SEL ESP
SEL BEEP
LOCAL
SEL
STEREO
SEL
SEL SEEK
TA SEEK
SEL
2 sec.
SEL LOUD
SEL
MASK DPI
SEL SEL
RETUNE DSP
SEL ESP
SEL BEEP VOL LAST /
VOL ADJ
VOL LAST
SEL
VOL
VOL
VOL
VOL
VOL
VOL
VOL
VOL
VOL
VOL
VOL

E5
TA SEEK
SEL
2 sec.
SEL SEL
MASK DPI
SEL
ESP
ESP12 / ESP 45
LOCAL/DX
LOCAL
SEL
TA SEEK
SEL
2 sec.
TA SEEK / TA ALARM
TA SEEK
SEL MASK DPI SEL
2 sec.
MASK DPI / MASK ALL
TA SEEK
SEL RETUNE SEL
RETUNE DSP
SEL
MASK DPI
SEL
TA SEEK
SEL
2 sec.
SEL SEL
MASK DPI
SEL RETUNE DSP
SEL
TA SEEK
SEL
2 sec.
SEL DSP ONMASK DPI SEL RETUNE
SEL
2 sec.
RETUNE L / RETUNE S
STEREO/MONO
STEREO
SEL
POP M --- ROCK M --- CLASS M --- FLAT M --- DSP OFF
SEL SEEK1 / SEEK 2SEEK
LOUD
LOUD ON/OFF
TA SEEK
SEL
2 sec.
SEL LOUD
SEL
MASK DPI
SEL SEL
RETUNE DSP
SEL ESP
ON/OFF
SEL
SEL
BEEP
TA SEEK
SEL
2 sec.
SEL LOUD
SEL
MASK DPI
SEL SEL
RETUNE DSP
SEL ESP
SEL BEEP
SEL SEEK
TA SEEK
SEL
2 sec.
SEL LOUD
SEL
MASK DPI
SEL SEL
RETUNE DSP
SEL ESP
SEL BEEP
STEREO
SEL
SEL SEEK
TA SEEK
SEL
2 sec.
SEL LOUD
SEL
MASK DPI
SEL SEL
RETUNE DSP
SEL ESP
SEL BEEP
LOCAL
SEL
STEREO
SEL
SEL SEEK
TA SEEK
SEL
2 sec.
SEL LOUD
SEL
MASK DPI
SEL SEL
RETUNE DSP
SEL ESP
SEL BEEP VOL LAST /
VOL ADJ
VOL LAST
SEL
VOL
VOL
VOL
VOL
VOL
VOL
VOL
VOL
VOL
VOL
VOL
TA SEEK
SEL
2 sec.
SEL SEL
MASK DPI
SEL
ESP
ESP12 / ESP 45
LOCAL/DX
LOCAL
SEL
TA SEEK
SEL
2 sec.
TA SEEK / TA ALARM
TA SEEK
SEL MASK DPI SEL
2 sec.
MASK DPI / MASK ALL
TA SEEK
SEL RETUNE SEL
RETUNE DSP
SEL
MASK DPI
SEL
TA SEEK
SEL
2 sec.
SEL SEL
MASK DPI
SEL RETUNE DSP
SEL
TA SEEK
SEL
2 sec.
SEL DSP ONMASK DPI SEL RETUNE
SEL
2 sec.
RETUNE L / RETUNE S
STEREO/MONO
STEREO
SEL
POP M --- ROCK M --- CLASS M --- FLAT M --- DSP OFF
SEL SEEK1 / SEEK 2SEEK
LOUD
LOUD ON/OFF
TA SEEK
SEL
2 sec.
SEL LOUD
SEL
MASK DPI
SEL SEL
RETUNE DSP
SEL ESP
ON/OFF
SEL
SEL
BEEP
TA SEEK
SEL
2 sec.
SEL LOUD
SEL
MASK DPI
SEL SEL
RETUNE DSP
SEL ESP
SEL BEEP
SEL SEEK
TA SEEK
SEL
2 sec.
SEL LOUD
SEL
MASK DPI
SEL SEL
RETUNE DSP
SEL ESP
SEL BEEP
STEREO
SEL
SEL SEEK
TA SEEK
SEL
2 sec.
SEL LOUD
SEL
MASK DPI
SEL SEL
RETUNE DSP
SEL ESP
SEL BEEP
LOCAL
SEL
STEREO
SEL
SEL SEEK
TA SEEK
SEL
2 sec.
SEL LOUD
SEL
MASK DPI
SEL SEL
RETUNE DSP
SEL ESP
SEL BEEP VOL LAST /
VOL ADJ
VOL LAST
SEL
VOL
VOL
VOL
VOL
VOL
VOL
VOL
VOL
VOL
VOL
VOL
TA SEEK
SEL
2 sec.
SEL SEL
MASK DPI
SEL
ESP
ESP12 / ESP 45
LOCAL/DX
LOCAL
SEL
TA SEEK
SEL
2 sec.
TA SEEK / TA ALARM
TA SEEK
SEL MASK DPI SEL
2 sec.
MASK DPI / MASK ALL
TA SEEK
SEL RETUNE SEL
RETUNE DSP
SEL
MASK DPI
SEL
TA SEEK
SEL
2 sec.
SEL SEL
MASK DPI
SEL RETUNE DSP
SEL
TA SEEK
SEL
2 sec.
SEL DSP ONMASK DPI SEL RETUNE
SEL
2 sec.
RETUNE L / RETUNE S
STEREO/MONO
STEREO
SEL
POP M --- ROCK M --- CLASS M --- FLAT M --- DSP OFF
SEL SEEK1 / SEEK 2SEEK
LOUD
LOUD ON/OFF
TA SEEK
SEL
2 sec.
SEL LOUD
SEL
MASK DPI
SEL SEL
RETUNE DSP
SEL ESP
ON/OFF
SEL
SEL
BEEP
TA SEEK
SEL
2 sec.
SEL LOUD
SEL
MASK DPI
SEL SEL
RETUNE DSP
SEL ESP
SEL BEEP
SEL SEEK
TA SEEK
SEL
2 sec.
SEL LOUD
SEL
MASK DPI
SEL SEL
RETUNE DSP
SEL ESP
SEL BEEP
STEREO
SEL
SEL SEEK
TA SEEK
SEL
2 sec.
SEL LOUD
SEL
MASK DPI
SEL SEL
RETUNE DSP
SEL ESP
SEL BEEP
LOCAL
SEL
STEREO
SEL
SEL SEEK
TA SEEK
SEL
2 sec.
SEL LOUD
SEL
MASK DPI
SEL SEL
RETUNE DSP
SEL ESP
SEL BEEP VOL LAST /
VOL ADJ
VOL LAST
SEL
VOL
VOL
VOL
VOL
VOL
VOL
VOL
VOL
VOL
VOL
VOL
TA SEEK
SEL
2 sec.
SEL SEL
MASK DPI
SEL
ESP
ESP12 / ESP 45
LOCAL/DX
LOCAL
SEL
TA SEEK
SEL
2 sec.
TA SEEK / TA ALARM
TA SEEK
SEL MASK DPI SEL
2 sec.
MASK DPI / MASK ALL
TA SEEK
SEL RETUNE SEL
RETUNE DSP
SEL
MASK DPI
SEL
TA SEEK
SEL
2 sec.
SEL SEL
MASK DPI
SEL RETUNE DSP
SEL
TA SEEK
SEL
2 sec.
SEL DSP ONMASK DPI SEL RETUNE
SEL
2 sec.
RETUNE L / RETUNE S
STEREO/MONO
STEREO
SEL
POP M --- ROCK M --- CLASS M --- FLAT M --- DSP OFF
SEL SEEK1 / SEEK 2SEEK
LOUD
LOUD ON/OFF
TA SEEK
SEL
2 sec.
SEL LOUD
SEL
MASK DPI
SEL SEL
RETUNE DSP
SEL ESP
ON/OFF
SEL
SEL
BEEP
TA SEEK
SEL
2 sec.
SEL LOUD
SEL
MASK DPI
SEL SEL
RETUNE DSP
SEL ESP
SEL BEEP
SEL SEEK
TA SEEK
SEL
2 sec.
SEL LOUD
SEL
MASK DPI
SEL SEL
RETUNE DSP
SEL ESP
SEL BEEP
STEREO
SEL
SEL SEEK
TA SEEK
SEL
2 sec.
SEL LOUD
SEL
MASK DPI
SEL SEL
RETUNE DSP
SEL ESP
SEL BEEP
LOCAL
SEL
STEREO
SEL
SEL SEEK
TA SEEK
SEL
2 sec.
SEL LOUD
SEL
MASK DPI
SEL SEL
RETUNE DSP
SEL ESP
SEL BEEP VOL LAST /
VOL ADJ
VOL LAST
SEL
VOL
VOL
VOL
VOL
VOL
VOL
VOL
VOL
VOL
VOL
VOL
TA SEEK
SEL
2 sec.
SEL SEL
MASK DPI
SEL
ESP
ESP12 / ESP 45
LOCAL/DX
LOCAL
SEL
TA SEEK
SEL
2 sec.
TA SEEK / TA ALARM
TA SEEK
SEL MASK DPI SEL
2 sec.
MASK DPI / MASK ALL
TA SEEK
SEL RETUNE SEL
RETUNE DSP
SEL
MASK DPI
SEL
TA SEEK
SEL
2 sec.
SEL SEL
MASK DPI
SEL RETUNE DSP
SEL
TA SEEK
SEL
2 sec.
SEL DSP ONMASK DPI SEL RETUNE
SEL
2 sec.
RETUNE L / RETUNE S
STEREO/MONO
STEREO
SEL
POP M --- ROCK M --- CLASS M --- FLAT M --- DSP OFF
SEL SEEK1 / SEEK 2SEEK
LOUD
LOUD ON/OFF
TA SEEK
SEL
2 sec.
SEL LOUD
SEL
MASK DPI
SEL SEL
RETUNE DSP
SEL ESP
ON/OFF
SEL
SEL
BEEP
TA SEEK
SEL
2 sec.
SEL LOUD
SEL
MASK DPI
SEL SEL
RETUNE DSP
SEL ESP
SEL BEEP
SEL SEEK
TA SEEK
SEL
2 sec.
SEL LOUD
SEL
MASK DPI
SEL SEL
RETUNE DSP
SEL ESP
SEL BEEP
STEREO
SEL
SEL SEEK
TA SEEK
SEL
2 sec.
SEL LOUD
SEL
MASK DPI
SEL SEL
RETUNE DSP
SEL ESP
SEL BEEP
LOCAL
SEL
STEREO
SEL
SEL SEEK
TA SEEK
SEL
2 sec.
SEL LOUD
SEL
MASK DPI
SEL SEL
RETUNE DSP
SEL ESP
SEL BEEP VOL LAST /
VOL ADJ
VOL LAST
SEL
VOL
VOL
VOL
VOL
VOL
VOL
VOL
VOL
VOL
VOL
VOL
BEEP MODE
When press the SEL button for more than 2 seconds, it is activated as selecting mode of these
function.
BEEP ON: BEEP sound can be heard from speaker when the buttons are pressed.
SEEK MODE
When press the SEL button for more than 2 seconds, it is activated as selecting mode of these
function.
SEEK 1: When SEEK 1 mode is activated, AUTO SEEK SCAN is stopped when station is detected even
user still push SEEK button.
SEEK 2: Auto SEEK SCAN is not stopped even station is detected if user push SEEK button. When
release this SEEK button, then stop when station is detected.
STEREO/MONO
When press the SEL button for more than 2 seconds, it is activated as selecting mode of these
function.
When FM stations are weak and are disturbed, listening can be improved by selecting MONO.
LOCAL/DX
When press the SEL button for more than 2 seconds, it is activated as selecting mode of these
function.
“Local” position in areas with strong signals to let radio stop at only strong stations during manual tuning
(LOC appears). Press to Distant position in areas with weak signals to listen to all stations.
VOL LAST/ADJUST
When press the SEL button for more than 2 seconds, it is activated as selecting mode of these
function.
VOL LAST: The volume level which user adjust lately is selected whenever power is ON and OFF.
VOL ADJ: The initial volume level (user can adjust) is selected whenever power is ON and OFF
3. VOL UP/VOL DOWN FOR BASS/TREBLE/BALANCE/FADER
Turning the VOL knob right or left,, you can adjust VOL/BASS/TREB/BAL/FAD and select the mode of TA
SEEK/MASK DPI/RETUNE/AUDIO DSP/LOUDNESS/ESP/BEEP/SEEK/STEREO/LOCAL/VOL LAST.
4. PRESET STATIONS (1,2,3,4,5,6)
(A) RADIO MODE:
When pressed short, these keys select a preset station directly. When pressed longer than 1 sec.,
current station is stored in preset memory bank. When PTY mode is selected, the PTY switch is shared
as follows:
PTY music group ---- PTY speech group ---- OFF

E6
MUSIC SPEECH
1. POP M, ROCK M 1. NEWS, AFFAIRS, INFO
2. EASY M, LIGHT M 2. SPORT, EDUCATE, DRAMA
3. CLASSICS, OTHER M 3. CULTURE, SCIENCE, VARIED
4. JAZZ, COUNTRY 4. WEATHER, FINANCE, CHILDREN
5. MATION M, OLDIES 5. SOCIAL, RELIGION, PHONEIN
6. FOLK M 6. TRAVEL, LEISURE, DOCUMENT
(B) CD/MP3/WMA PLAYER MODE:
1. PAUSE 2. INTRO 3. REPEAT 4. RANDOM
USING THE RDS FUNCTION
What is RDS?
The RDS (Radio Data System) is a digital information system developed by the EBU (European Broadcast
Union). Piggy-backed on normal FM broadcasts, RDS offers a variety of information services and automatic
retuning functions for RDS-compatible car stereos.
In 1988, RDS became available in the United Kingdom, France, West Germany, Ireland and Sweden. Test
transmissions are being conducted in many other european countries. It is expected that RDS will be available
in most western european countries in the near future.
5. ‘AF’ function (ALTERNATIVE FREQUENCIES)
When pressed short, AF switching mode is selected.
When AF switching mode is selected, the radio check the signal strength of the AF all the time. When
pressed long, it is activated as regional mode ON/OFF.
– Regional mode ON:
AF switching or PI SEEK is implemented to the station which have all PI codes are same as current
station. REG segment is turned on, in LCD display.
– Regional mode OFF
The regional code in the format of PI code is ignored when AF switching or PI SEEK is implemented.
6. ‘TA’ function (TRAFFIC ANNOUNCEMENT)
When pressed short, it is activated as TA mode on or off
When TA mode is on and trafc announcement is transmitted.
– When the unit is it CD/MP3 mode, it will switch to radiomode temporarily.
– If the volume level was under the threshold point, it will be raised to the threshold point.
– When TP station is received, TP segment is turned on in LCD display.
7. ‘PTY’ function (PROGRAM TYPE)
PTY MUSIC ---- PTY SPEECH ---- PTY OFF
While selecting PTY type, its selection is implemented by preset buttons as described in preset key. When
PTY is selected, the radio starts to search corresponding PTY information, and stops if the corresponding
PTY information is detected.
8. DISPLAY (DISP)
Press DISP button to switch between display informations such as radio frequencies, clock, track and
other informations depending on the playing MODE.
9. MODE BUTTON (MODE)
By pressing this key, user can select.
RADIO, CD/MP3/WMA PLAYER or AUX IN mode.
10. BAND (BAND)
Each band is toggled cyclically by pressing this key FM1---FM2---FM3.
11. AUTOMATIC OR MANUAL TUNING (FREQ UP OR FREQ DOWN )
(A) RADIO MODE
When pressed short, these keys are operated as manual tuning mode.
When pressed longer than 1 sec., they are operated as seek tuning mode.
(B) CD/MP3/WMA PLAYER MODE
When pressed short, they are operated as TRACK UP or TRACK DOWN mode.
When pressed longer than 1 sec., they are operated as CUE or REVIEW mode.
12. AUTO SEEK SEARCH TUNING (A/PS)
By pressing shortly, the radio searches for each preset station.
When eld strength level is bigger than the threshold level of stop level, the radio is holding at that preset
number for 5 sec. with releasing mute, and then searches again.

E7
By pressing longer than 1 sec, and then 6 strongest stations are preset to the corresponding preset
number.
When AS operation is nished, the radio executes the preset scan.
13. ‘SCAN’ AUTOMATIC TUNING CONTROL (SCN)
This key is operated as RADIO SCAN
The operation is similar as normal search but different thing is holding 5 seconds on every station detected
in RADIO SCAN mode.
14. OPEN THE FRONT PANEL
Press button and the front panel will open.
15. LCD DISPLAY
The Liquid Crystal Display will display the current state of the unit.
CD/MP3/WMA CONTROL LOCATION OF PARTS
TRACK/SEARCH BUTTON (11)
FORWARD AND REVERSE TRACK SEARCH (or changing songs)
Press the SKIP button ( or ) during play to go to the desired track(song).
....REVERSE ....FORWARD
Press and hold the SKIP button ( or ) during play to scan the disc at high speed. When the desired
music section of the disc is found, release the button. Normal play will resume.
16. CD EJECT BUTTON
Press the EJECT button to remove the CD.
17. CD SLOT
18. PAUSE BUTTON
During “PLAY”, press (18) PAU button to “PAUSE”. Press it again to resume play.
19. INTRO BUTTON (Preview all Tracks)
Press this switch less than 1 sec. ‘INT ON’ indication is displayed and the 10 rst seconds of each track
of the disc are played in normal progression. If you wish to cancel INTRO mode on selected track, press
‘INT’ and play of the selected track starts ‘INT ON’ disappears from display.
20. REPEAT BUTTON ‘RPT’
When you press ‘RPT’ button ‘RPT ON’ indication is displayed. Play of the selected track will be continually
repeated until the Track Repeat mode is cancelled by pressing ‘RPT’ button (20) ‘RPT’ disappears.
21.RANDOM BUTTON ‘RDM’
When you press ‘RDM’ button (21). ‘RDM ON’ indication is displayed and each track of the disc in play
are played in a random instead of normal progression. To cancel RANDOM mode, press ‘RDM’ button
(21) again.
22, 23. 10 TRACK DOWN/UP SELECT: (In case of MP3/WMA les)
M5: 10 Track down / M6: 10 Track up
HOW TO SELECT MP3/WMA FILES
A. Searching Track:
• Press “A/PS”, then searching track is activated.
• Press “VOL” knob, then the rst digit is blinking.
• With “
VOLVOL
/
VOLVOL
” knob, select rst digit you want.
• Press “VOL” knob, then the rst digit is xed and second digit is blinking.
• With “
VOLVOL
/
VOLVOL
” knob, select 2’nd 3’rd respectively.
• Then automatically the song you selected will start.
B. Searching File Name:
• Press “A/PS” twice, then le search is activated.
• Press “VOL” knob, then the rst directory is displayed.
• With “
VOLVOL
/
VOLVOL
” knob, you can select the directory you want.
• Press “VOL” knob again, then the directory is xed and the rst le name is displayed.
• With “
VOLVOL
/
VOLVOL
” knob, you can select the le you want.
• Press “VOL” knob, then the song you selected will start.

E8
C. Searching Character:
• Press “A/PS” 3 times, then character search mode is activated.
• Press “VOL” knob, then “A” character is displayed.
• With “
VOLVOL
/
VOLVOL
” knob, you can select the letter you want.
• Press “VOL” knob longer than 2 sec.
• The song which has same character you selected is displayed.
• With ““
VOLVOL
/
VOLVOL
” knob, you can select the song you want.
• Press “VOL” knob, then the song you selected will start.
24. FRONT AUX IN
Convenient easy to use front “AUX IN” input jack, allows easy connection of Portable Media and digital
MP3 Players.
25 RESET
Reset button is placed on the housing.
The reset button is to be activated for the following reason:
• Initial installation of the unit when all wiring is completed.
• All the function button do not operate.
• Error symbol on the display.
26. POWER INDICATOR LED
Flash LED when ignition is switched on.
LOCATION OF REMOTE CONTROL
1. Power on / off
2. Answer / Make a call
3. End a call
4. Select band
5. Tuning freq. up /down
6. Function select
7. Mode
8. Phone number
How to Perform Pairing
Before you can dial out from the car stereo, you must first perform PAIRING.
Pairing is a procedure used to connect 2 Bluetooth devices together.
1. This unit’s Bluetooth function is always on, perform the pairing starting from your cellular phone. Refer
to your cellular manual on proper pairing.
2. Perform the search for available Bluetooth devices, “CAR BLUETOOTH ” will show. Enter ‘8888’ when
asking for code.
3. After successful pairing, connect to the head unit if it is not automatically connected.
Connect / Disconnect Bluetooth Device
The unit will automatically try to reconnect to the last successfully connected mobile upon power on. To
disconnect, simply press + *on the remote control.
Answering / Hanging Up
1. Make sure your mobile and the unit is properly paired and connected.
2. To answer a call, press the button. Once you have finished your conversation, press the button
to hang up.
Making Calls Using the Remote Control
Before you make calls, make sure that the devices are properly paired and connected.
1. Press . Enter the phone number via the remote control and press to dial out. Unit will display
“Dialing”. Press ‘#’ button to make corrections when entering numbers.
2. Press button to end call.
Incoming / Outgoing Called Numbers
This unit has record for incoming and outgoing calls made up to 12 entries. Use this feature to check the
numbers and make calls from it.
1. Press twice. Press the TN-DN or TN-UP to browse for entries. When the number is found, press to
dial out.
2. Press button to end call.
1
5
4
2
3
8
6
7
25 26
RESET

E9
Note:
• To delete number stored in the entries, browse for the number and press ‘*’.
• This unit will only save incoming calls and numbers made from the remote control. Numbers made directly
through the cellular phone will not be saved.
• Latest entry will always be save in location 12. Previous entries will move down by one location
number.
Audio Streaming
If your phone is “A2DP” format compatible, then you can play music in your mobile and the sound will be
transferred to car head unit.
1. Make sure your mobile and the unit is properly paired and connected.
2. Play the music through your mobile music player software.
3. Unit will display “AV” indicating receiving streaming audio.
4. To stop audio streaming, press ‘#’. Unit will terminate streaming function but Bluetooth function will still
be connected.
ALL RIGHTS RESERVED
COPY RIGHT DENVER ELECTRONICS A/S
www.denver-electronics.com
Instructions on environment protection
Do not dispose of this product in the usual household garbage at the end of its lifecycle; hand it over at a collection
point for the recycling of electrical and electronic appliances. The symbol on the product, the instructions for use
or the packing will inform about the methods for disposal.
The materials are recyclable as mentioned in this marking. By recycling, material recycling or other forms of re-
utilization of old appliances, you are making an important contribution to protect our environment.
Please inquire at the community administration for the authorized disposal location.
Note: Specication and the design are subject to possible modication without notice due to improvements.
CD/MP3/WMA PLAYER SECTION
Signal to Noise Ratio > 60 dB
Channel Separation > 50 dB (1kHz)
Frequency Response 20Hz - 20 kHz
TUNER (FM)
Frequency range 87.5-108 MHz
Intermediate frequency 10.7 MHz
Sensitivity 2.8 µV
Stereo separation 30 dB
Signal to noise ratio 50 dB
Channel step 50 kHz
TECHNICAL SPECIFICATIONS
LINE-OUT
Output 5V max.
Impedance 10k Ohm
RCA LINE-IN / FRONT AUX IN
Frequency Response 20 Hz - 20 kHz
Sensitivity 775 mV
Impedance 20k Ohm
GENERAL
Power Supply 12V DC (10.8-15.6V allowable)
Speaker impedance 4 or 8 ohm
Output power 40W x 4CH
Fuse 10A