Denver TFD-2214MC User manual

Operating Instructions
22" TFT LCD DVBT+ DVD COMBODVBC+
TERMINALS INPUT: HDMI, YPBPR ,AV, SCART, PC, USB, CI..
AC 110-240V 50/60Hz
TELETEXT
NTSC PLAYBACK
PAL/SECAM B/G,D/K,I
SLOT IN DVD PLAYER
TFD-2214MC

Table Of Contents
1
Table of Contents 1
2
3
Important Safety Instruction
Warnings and Cautions
4
Functional Parts(TV)
7-9
Connecting External Equipment
Basic Operation
Troubleshooting Tips 24
Rear View Of TV Set
Operation-Remote Control 10-11
Functional Parts(DVD) 5
12-21
Inital Settings(DVD) 22-23
6

2
CAUTION
Never tamper with any components inside your set, or any other adjustment controls not mentioned in
this manual. The LCD panel used in this product is made of glass. Therefore,it can break When the
product is dropped or applied with impact. Be careful not to be injured by broken glass pieces in case
the LCD panel breaks.When you clean up dust or stick of a water drop on the LCD panel. The power
cord should be pulled out from the plug receptacle, then wipe the receiver with dried soft Cloth.
During thunder and lighting ,unplug the power cord and antenna cord to prevent your TV set from
damage. All television receivers are high voltage instruments. All "inside work" on your receiver should
be performed only by the TV service personnel.
If some abnormal phenomena happens , may be you have some mis-opertion,please take off power and
restart your TV set .
WARNING: TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT EXPOSE THIS
APPARATUS TO RAIN OR MOISTURE AND OBJECTS FILLED WITH LIQUIDS,
SUCH AS VASES, SHOULD NOT BE PLACED ON THIS APPARATUS.
The lighting flash with arrow head within a triangle is intended to tell the user that
parts inside the product are a risk of electric shock to persons.
The exclamation point within a triangle is intended to tell the user that important
operating and servicing instructions are in the papers with the appliance.
RISK OF ELECTRIC SHOCK
DO NOT OPEN
WARNING
WARNING: TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT
REMOVE COVER OR BACK. NO USER-SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
Important Safety Instruction

3
Caution
Do not drop or push objects into the television cabinet slots
or openings. Never spill any kind of liquid on the television
receiver.
Caution
Do not insert anything in the ventilation holes. If metal or
something flammable enters, it may result in fire or electric shock.
Warnings And Cautions
Caution
Do not place your television on an unstable cart , stand , shelf or
table. Serious injury to an individual, and damage to the television,
may result if it should fall.
Caution
Do not block the ventilation holes in the back cover.
Adequate ventilation is essential to prevent failure of electrical
component.
简 介
To prevent fire or electrical shock hazard, Do not expose the
television receiver to rain or moisture.
Warning

Functional Parts( TV )
Front View of LCD Set
To turn the TV power ON
Put the TV set on the correct place, then connect the DC plug of the AC-DC adaptor to the DC 12V socket
at the back of the TV set. Connect the adaptor main cord to the wall outlet ,then the LED indicator lamp
turns red/blue and the TV set is at Standby/work Mode. At Standby Mode, if Standby Button is pressed
the power indicator will change to blue. It takes a few seconds before the picture appears.
To turn the TV power OFF
Press the Standby Button to make the TV set in Standby Mode, then disconnect the power plug from the
wall outlet.
NOTE:
If TV is the selected input without signal received and NO operation is performed for about 5 minutes
continuously, the TV set will enter standby mode. For any inputs other than TV, the TV set will not enter
standby mode automatically without users instruction. If you are not going to use this TV set for a long
time, switch off the set and disconnect the power plug from the wall outlet.
4
2. LED indicator lamp
1. Remote Sensor
12
7 6 5 4 3
V- V+ P- P+
MENU SOURCE STAND BY
89
3. Standby Button
4. SOURCE Button
5. MENU Button
6. P+ Button
7. P- Button
8. V+Button
9. V- Button

Functional Parts(DVD)
Switch this LCD-TV Set to DVD status, insert the disk to DVD slot, and the player will suck it in.
Notes:
1.Do not attach any seal or label to either side (the labeled side or the recorded side) of a disc.
2.Do not use irregularly shaped CDs (e.g., Heartshaped or octagonal)since they may result in
malfunctions.
3.Some playback operations of DVDs and Video CDs may be intentionally programmed by
software manufacturers. This unit plays DVDS and Video CDs according to disc content
designed by the software manufacturer, therefore some playback features may not be
available or other functions
may be added.
5
1
2. Play/Pause
1. DVD Slot
3. Stop
4. Open/Close
2
4
3

Rear View Of TV Set
EARPHONE
ANT
SPDIF
PC-A IN
VGA
USB
HDMI
YPbPr
VIDEO
SCART
DC IN 12V
NOTE:
Precautions when connecting to other equipment
When using external equipment with this TV set, please read the instruction manual of the external equipment.
Switch off all power supplies to the equipment and TV set before connection.
Always ensure that the input and output terminals are correctly connected.
The UPDATE terminals just use to update the system software.
6
PC-A IN HDMI
CI
SPDIF
R
Pr Pb
VIDEO
L
DC-12V

ANT PC-A IN SCART
VGA HDMI DC-12V USB
CI
Connecting External Equipment
Connecting a PC
When your PC is connected to the TV with D-SUB cable and audio cable.
You can view and listen to the PC's video and audio output on the TV. Use the VASE 1280 X 800@60Hz
format to obtain the best image quality for your TV.
Connecting a VCR or other device(E.G. DVD/Digital cable Box/Satellite Receiver) with composite
video connectors.
Connect the video output of the device to the composite video input (yellow RCA) on the TV. Connect the
line-level audio output of the device to the audio inputs( Red and White RCA) on the TV with AV cable.
LEFT SIDE
7
LEFT SIDE
Note: Cable are often color-coded to connectors. Connect red to red, white to white ,etc.
ANT PC-A IN SCART
VGA HDMI DC-12V USB
CI
R
Pr Pb
VID EO
LR
Pr Pb
VID EO
L

ANT PC-A IN SCART
VGA HDMI DC-12V USB
CI
ANT PC-A IN SCART
VGA HDMI DC-12V USB
CI
8
Connecting External Equipment
Connecting a DVD Player or other device (E.G. VCR/Digital cable Box/Satellite Receiver) with
Component Video Connectors .
Use a component video cable to connect the DVD player's YPbPr jacks to the TV's YPbPr jacks.
Use an audio cable to connect the DVD player's AUDIO OUT jacks to the TV's AUIDOIN jacks . Be sure
to use the same row of input that you used for the video connection.
Note: The YPbPr jacks on your DVD player are sometimes labeled YCbCr, or Y, B-Y and R-Y. if so,
connect the cables to like colors.
Note: Cable are often color-corded to connectors. Connect red to red, white to white, etc.
LEFT SIDE
DVD PIAYER
Connecting a VCR or other device (E.G. DVD/Digital Cable Box/ Satellite Receiver)with Scart
connectors
Use a SCART video cable to connect the VCR SCART jacks to the TV'S SCART jacks.
Scart cable
LEFT SIDE
R
Pr Pb
VID EO
L
R
Pr Pb
VID EO
L

ANT PC-A IN SCART
VGA HDMI DC-12V USB
CI
ANT PC-A IN SCART
VGA HDMI DC-12V USB
CI
Connecting External Equipment
Connecting a DVD with High-definition multimedia connectors
Use HDMI cable connect the DVD HDMI jack to the TV's HDMI jack.
HDMI
Y
COAXIAL
U/Pb
V/Pr
VIDEO
S-VIDEO
LEFT
RIGHT
DVD PIAYER
Connecting a television system and earphone
Use RF cable connect the antenna / set top box /satellite R.F output jack to the TV's TUNER jack.
Use stereo audio cable to connect the earphone to the TV's earphone jack.
Sate llite
Receiver
To antenna or
set top
box/satellite
R.Foutput.
LEFT SIDE
9
LEFT SIDE
HDMI cable
R
Pr Pb
VID EO
L
R
Pr Pb
VID EO
L