DEVAISE AHDG042 User manual

AHDG042
V3.5
Fabric 3 Drawer File Cabinet with Shelf

During assembly, please only slightly tighten all screws in their correct position first, then fully
tighten them. A Philips screwdriver is recommended but not included.
•
GENERAL GUIDELINES
WARNINGS
Please read the following instruction carefully and use the product accordingly.
During assembly, keep parts and packaging materials away from children and pets as there
could cause injury and are a potential choking hazard.
Avoid sharp objects or corrosive chemicals to prevent damage to the product.
Please open the item slowly and cautiously to avoid pinching your hands by metal joints,
especially children.
If an odor is present when first opening the package, please leave the unwrapped product in
a shaded and ventilated area for a few days to air out.
Please follow the assembly instructions precisely and only use the product as intended.
Prior to assembly, please check the product for defects or missing accessories. If any
defects are found or accessories are missing, do not use product as damage or injury
may occur;
Please contact us for assistance and replacement.
It is suggested you regularly check the products bolts and connections to ensure safe use.
Assemble the item on a soft flat and clean surface to avoid scratches and damage.
It is recommended that two people assemble this product.
Please keep this manual and hand it over when you transfer the product.
This summary may not include every detail of all variations and considered steps.
Please contact us when further information and help are needed.
•
•
•
•
•
•
•
•
•
•
•
•
IMPORTANT INFORMATION
READ CAREFULLY.
KEEP THIS INFORMATION FOR FURTHER REFERENCE.
NOTES

If you have any further questions, please feel free to contact us
by email or official website: [email protected]
We will reply ASAP.
Enjoy your new purchase!
Before installation, please make sure you have all the hardware,
the serial numbers are properly labeled corresponging to the list,
and the quantity is correct.

1
EXPLODED DRAWING
×2
1
8
6
6
2
3
4
5
9
7
12
10
11
11

2
PARTS
M6x23 M6x10
X6
B
X3
C
X6
D
X13
A
X3
F
X2
G
X2
H
X4
E
X2
J
X1
K
X1
L
X2
I
X4
M
M5x30
F1
F2
E1 E2
D3D2D1
1M6x10
K
B
B×6
REMARK
Put a blanket under the board to avoid scratch or damage.
Make sure the holes on Part 2and Part 3at the same side.
1.
2.
3. Please do not fully tighten screws until all screws are in place.
1
3
29
X6
X1

3
2
3
REMARK
Please do not fully tighten screws until all screws are in place.
REMARK
Please do not fully tighten screws until all screws are in place.
M5x30
X1
X4
K
M
M6x23
X1
X4
K
A
4
5
3
9
8
7
A×4
M×4
2

4
4
5
M6x23
X1
X6
K
A
HX2
GX2 LX1
REMARK
Make sure the holes on Part 7and Part 2& Part 3are on the same side.
Please do not fully tighten screws until all screws are in place.
1.
2.
7
HH
GG
FRONT
39
7
2
A×6
H
G
Lockable casters
360° Swivel Casters

5
6
7
REMARK
6
6
REMARK
CX1
LX1
X1K
M6x23
X1
A
CX2
LX1
X1K
M6x23
X2
A
AA
A
C
C
C
Please do not fully tighten screws at this step.
Please fully tighten all the screws after they are in right place，including those in Step 6.

6
8
9
×2
KX1
F1
F2
K
X1 X1
F
X2
F
F1
F2
12
12
12
10
10
10
11
11
F2
F2
F1 ×2
F1 ×2

7
10
11
J
X4
X2
E
E1
J
E2
D3
D3
E1
J
E2
×4
D3 X6
D3
D3
D3 D3
D3
D3
×6
12

8
12
13
DX2
D2D1
KX1
×2
IX2
I
12
12
D1
D2

9
×2
14 DX4
D2
D2
D1
D1
KX1
12
10
10
×2
+
D1 D1
D2 D2