Develop ineo+ 224 User manual

ineo
+
224/284/364
ineo+454/554
Product Guide
16.05.2012

2
Product Guide ineo+224/284/364/454/554
Table of contents
Product Basic.............................................................................3
Product Configuration...............................................................4
System Specifications...............................................................9
Printer Specifications ineo Controller...................................22
Printer Specifications Fiery IC-414 (VI-506 required)..........25
Scanner Specifications ...........................................................27
Fax Specifications....................................................................28
Consumables............................................................................30
Article Numbers........................................................................32
Service Part...............................................................................36
Appendix ...................................................................................38

3
Product Guide ineo+224/284/364/454/554
P Pr ro od du uc ct t B Ba as si ic c
MODEL DEVELOPMENT CODE Zeus X Zeus 0 Zeus 1 Zeus 2 Zeus 3
MODEL NAME ineo+554 ineo+454 ineo+364 ineo+284 ineo+224
SUCCESSOR MODEL FOR ineo+552 ineo+452 ineo+360 ineo+280 ineo+220
ESTIMATED SALES START 08/2012 07/2012
INFOSOURCE SEGMENT IV III II
ALSO AVAILABLE AT KM bizhub C554/C454/C364/C284/C224
Olivetti d-Color MF554/MF454/MF364/MF284/MF222
TYPE Console/Stationary Platen
Colour MFP
MAX. (PEAK) MONTHLY PAGE
VOLUME (COLOUR/MONO) 50k/150k 38k/112k 5k/19k 3k/11k
AVERAGE/PERMANENT MONTHLY
PAGE VOLUME 33.3k 30k 13.3k 10k
MACHINE LIFE 2000k or 5
years 1800k or 5 years 800k or 5 years 600k or 5 years
FLAT BED SCANNER/
EXPOSURE LAMP LIFE 250k/580k
MCBF (Mean
Copies Between
Failure)
Total
Colour
Mono
85.3k
70.3k
91.8k
68.5k
56.5k
73.8k
57.4k
47.3k
61.8k
48.2k
39.8k
51.9k
42.1k
34.7k
45.4k
MCBJ (Mean Copies Between Jam) 10k with standard paper
MTTR (Mean Time To Repair) No figure available
STANDARD COPY MODE (MONO &
COLOUR) 6 Pages/
job 5 Pages/ job 4 Pages/ job 3 Pages/ job 2 Pages/ job
STANDARD ORIGINAL DENSITY 5 % Mono & Color
SAFETY & ENVIRONMENT
English/German Data Sheets
Downloadable in the dbox:
dbox/Support/CSES Download/Open CSES Download/Document/
Safety & Environment
PLEASE NOTICE
Standard paper weight for systems is 80 g/m2for monochrome machines and 90 g/m2for full colour ones. Since using these
standards result in optimum system performance, all specifications on performance, reliability, maintenance and replacement
based on those standard papers. Using thick papers, labels, transfer and polyester films continuously can increase the wear
and tear on replacement parts and consumables – meaning your servicing costs will go up.
Use the bypass or the lower tray from the paper feed unit when working with materials having such characteristics as polyester
films, textile transfer films and labels. Otherwise, you may be faced with double feeding or a higher number of feeding jams.
If possible use subtray when working with materials having such characteristics as polyester films, textile transfer films and
labels. Roller-marks on the copy or print may appear or increased jams can occur. Standard paper weights yield the best
possible copy and print results. Using higher grammage may influence the quality of the output. Using standard paper weights
also guarantees that double sided copies and prints are made reliably. Different characters of films as well as thick, thin and
coated papers may increase the jam rate for double sided copies and prints.

4
Product Guide ineo+224/284/364/454/554
P
Pr ro od du uc ct t C Co on nf fi ig gu ur ra at ti io on n
SYSTEM DIMENSIONS
ineo+224/284/364 + PC-201 (or PC-110 or PC-410 or DK-510) +DF-624
Unit in mm

5
Product Guide ineo+224/284/364/454/554
SYSTEM DIMENSIONS
ineo+224/284/364 + PC-201 (or PC-110 or PC-410 or DK-510) +DF-624 + FS-534 + (MK-730)
Please be aware, that the Banner Tray MK-730 is not available in Europe. Europe will have the Banner
Tray BT-C1 instead.
Unit in mm

6
Product Guide ineo+224/284/364/454/554
SYSTEM DIMENSIONS
ineo+454/554 + PC-201 (or PC-110 or PC-410 or DK-510) +DF-701 + FS-533
Unit in mm

7
Product Guide ineo+224/284/364/454/554
SYSTEM DIMENSIONS
ineo+454/554 + PC-201 (or PC-110 or PC-410 or DK-510) +DF-701 + FS-535 + Pi-505 +
ZU-606 + LU-204 (or LU-301) + (MK-730)
Please be aware, that the Banner Tray MK-730 is not available in Europe. Europe will have the Banner
Tray BT-C1 instead.
Unit in mm

8
Product Guide ineo+224/284/364/454/554
SYSTEM CONFIGURATION
Will be added in the next PG edition

9
Product Guide ineo+224/284/364/454/554
S
Sy ys st te em m S Sp pe ec ci if fi ic ca at ti io on ns s
DUPLEX TYPE AUTO DOCUMENT
FEEDER DF-624 Option ineo+224/284/364
Original Size
A6 / max. A3
Original Weight
35 - 128 g/m² (Simplex)
50 – 128 g/m² (Duplex/Mix Mode)
Tray Capacity
100 sheets (80g/m², A4)
Feeding Type
First Page System
Feeding Speed
SimplexMode: Copy :55 sheets (600 dpi) [mono & colour]
Scan: 80 sheets (300 dpi) [mono & colour]
Duplex Mode: Copy: 26 sheets (600 dpi) [mono & colour]
Scan: 37 sheets (300 dpi) [mono & colour]
Dimensions (WxDxH) mm
611.2 x 503.6 x 130
Weight (kg)
9.0
DUAL SCAN DOCUMENT FEEDER
DF-701 Option ineo+224/284/364
Standard ineo+454/554
Original Size
A6 / max. A3
Original Weight
35 - 163 g/m² (Simplex)
50 – 163 g/m² (Duplex)
50 – 128 g/m² (Mixed Mode)
Tray Capacity
100 sheets (80g/m², A4)
Feeding Type
First Page System, Dual Scan
Feeding Speed
SimplexMode: Copy :55 sheets (600 dpi) [mono & colour]
Scan: 80 sheets (300 dpi) [mono & colour]
Duplex Mode: Copy: 110 sheets (600 dpi) [mono & clr.]
Scan: 160 sheets (300 dpi) [mono & clr.]
Dimensions (WxDxH) mm
611.2x 503.6 x 130
Weight (kg)
12
ORIGINAL COVER OC-511 Option ineo+224/284/364
Remark
Required if no Document Feeder is attached

10
Product Guide ineo+224/284/364/454/554
PAPER CASSETTES Standard
Capacity
1 Tray: 500 sheets (universal)
2 Tray: 500 sheets (universal)
Paper Format
1 Tray: B5 crosswise – A3
2 Tray: B5 crosswise – SRA3 (320 x 450 mm)
Paper Weight
1 – 2 Tray: 52 – 256 g/m²
Max. Paper Capacity
6,650 sheets incl. bypass and optional cassettes for ineo+ 454/554
3.650 sheets incl. bypass and optional cassettes for
ineo+224/284/364
BYPASS Standard
Capacity
150-sheet bypass
Paper Format
A5 lengthwise – SRA3
Width: 90 to 320, Length: 139.7 to 1200 mm
Paper Weight
52 – 300 g/m² (OHP, labels, Banner Size, etc.)
DUPLEX Standard
Availability Status
Standard
Capacity
stackless
Paper Format
A5 – SRA3
Paper Weight
52 – 256 g/m²
PAPER FEED CABINET PC-110 Option
Paper Size
A5 – A3
Paper Weight
52 – 256 g/m²
Paper Capacity
1 x 500 sheets (80 g/m²)
Media Type
Plain Paper
Dimension (WxDxH) (mm)
615 x 652 x 246
Weight (kg)
22

11
Product Guide ineo+224/284/364/454/554
PAPER FEED CABINET PC-210 Option
Paper Size
A5 – A3
Paper Weight
52 – 256 g/m²
Paper Capacity
2 x 500 sheets (80 g/m²)
Media Type
Plain Paper
Dimension (WxDxH) (mm)
615 x 652 x 246
Weight (kg)
24
PAPER FEED CABINET PC-410 Option
Paper Size
A4 crosswise
Paper Weight
52 – 256 g/m²
Paper Capacity
2500 sheets (80 g/m²)
Media Type
Plain Paper
Dimension (WxDxH) (mm)
615 x 652 x 246
Weight (kg)
23
COPY DESK DK-510 Option
Dimension (WxDxH) (mm)
615 x 650 x 252
Weight (kg)
14.2
Type
Rigid, metal with plastic door
LARGE CAPACITY TRAY LU-204 Option
Paper Size
A4 –SRA3
Paper Weight
52 – 256 g/m²
Paper Capacity
2500 sheets 80 g/m²
1000 sheets 256 g/m²
Dimensions (WxDxH) (mm)
629 x 556 x 405
Weight (kg)
25

12
Product Guide ineo+224/284/364/454/554
LARGE CAPACITY TRAY LU-301 Option
Paper Size
A4 crosswise
Paper Weight
52 – 256 g/m²
Paper Capacity
3000 sheets 80 g/m²
1300 sheets 256 g/m²
Dimensions (WxDxH) (mm)
367 x 528 x 405
Weight (kg)
18
BANNER TRAY BT-C1 Option
Function
To support multi banner feeding through manual bypass
INNER FINISHER FS-533 Option
Functionality
Stacking, Stapling
Paper Weight
52 – 300 g/m²
Paper Size
A6 – SRA3, Banner
Stack Capacity
500 sheets A4 (52 – 90 g/m²),
250 sheets A3 (52 – 90 g/m²)
Staple Mode
Corner front/back, 2-point
Stapling Capacity
50 sheets A4 (52 - 90 g/m²), 30 sheets A3 (52 - 90 g/m²),
2 sheets (91 - 209 g/m² cover pages),
Staples
SK-602
Dimensions (WxDxH) (mm)
472.5 x 583.5 x 194.7
Weight (kg)
12
Remark
One staple cartridge is packed to the finisher

13
Product Guide ineo+224/284/364/454/554
50 SHEETS STAPLE FINISHER
FS-534 Option
Finishing Modes Non-sort, sort, group, staple, punch (option), fold (option)
Tray Capacity
200/3000 sheets A4, 200/1500 sheets A3
Paper Weight
52 – 300 g/m²
Paper Size
A6 – SRA3, Banner
Stapling Capacity
Max. 50 sheets 90 g/m²), 30 sheets (91 – 120 g/m²) 15 sheets (121 –
209 g/m²)
Stapling Format
A3 – A5 lengthwise
Staples
SK-602
Dimensions (WxDxH) (mm)
528 x 641 x 1,023
Weight (kg)
40
Remark
One staple cartridge is packed to the finisher.
Options for FS-534: PK-520 for Europe/Sweden, SD-511
SADDLE KIT SD-511 Option for FS-534
Paper Size
A4 lengthwise / A3+ (311 x 457 mm)
Paper Weight
Centre Staple: 52 – 90 g/m²
Half-Fold: 52 – 209 g/m²
(more than 91 g/m² sheet can be used only as cover sheet)
Tri-Fold: 52 – 90 g/m²
Tray Capacity
20 sets (1-3 pages), 5 sets (11-20 pages)
Tri-Fold: 30 sets with 1 page, 10 sets with 2 or 3 pages
Stapling Modes
Centre parallel 2 points (booklet staple)
Stapling Capacity for Centre Stapling
20 sheets (52 – 90 g/m²), 19 sheets (14 sheets 90 g/m² + 1 sheet
209 g/m²)
Staples
SK-602
Dimensions (WxDxH) (mm)
210 x 556 x 547
Weight (kg)
24
Remark
One staple cartridge is packed to the saddle kit

14
Product Guide ineo+224/284/364/454/554
PUNCH KIT PK-519 for
Europe/Sweden Option for FS-533
Punch Method
On-line, page by page, 2 or 4 holes for Europe, 4 holes for Sweden
Hole Diameter
6.5 mm ± 0,5 mm
Paper Size
A3, B4, A4 L, B5 L, (200 mm x 330 mm)
Paper Weight
52 – 157 g/m²
Dimensions (WxDxH) (mm)
110.2 x 483.5 x 203.2
Weight (kg)
3.2
PUNCH KIT PK-520 for
Europe/Sweden Option for FS-534
Punch Method
On-line, page by page, 2 or 4 holes for Europe, 4 holes for Sweden
Hole Diameter
6.5 mm ± 0,5 mm
Paper Size
A3, B4, A4 L, B5 L, (200 mm x 330 mm)
Paper Weight
52 – 300 g/m²
Dimensions (WxDxH) (mm)
61 x 492 x 142
Weight (kg)
2
100 SHEETS STAPLE FINISHER
FS-535 Option
Finishing Modes Non-sort, sort, group, offset sort, offset group, staple, punch (option)
Tray Capacity
Main Tray: 3,000 sheets (80 g/m²) [non sort]
2,500 sheets when SD-512 is installed
Sub Tray: 200 sheets (80 g/m²)
Stapling Modes
Corner (front/back), centre 2 points
Stapling Capacity
100 sheets (90 g/m²), 50 sheets (up to 105 g/m²),
94 sheets (90 g/m²) + 2 sheets (209 g/m²) as cover
Stapling Format
A3 – A5 lengthwise
Staples
MS-10A, one staple cartridge is packed to the finisher
Shift
30 mm
Weight (kg)
63.5
Remark
Options for FS-535: PK-521 for Europe/Sweden, SD-512, PI-505,
ZU-606 and JS-602.

15
Product Guide ineo+224/284/364/454/554
JOB SEPARATOR JS-602 Option for FS-535
Function
Additional 3rd bin for FS-535
Paper Weight
60 – 90 g/m²
Paper Size
A5 – A3W (311 x 457 mm)
Stacking Capacity
Max. 100 sheets (60 – 90 g/m²)
Dimensions (WxDxH) (mm)
341 x 537 x 149
Weight (kg)
1.75
Remark
Cannot be used together with PI-505
INNER JOB SEPARATOR JS-506 Option
Paper Size
Tray 1/2: A6 to SRA3, Banner and Long Length Tray 2 only
Paper Weight
Tray 1/2: 52 – 300 g/m²
Capacity
Tray 1: 150 sheets (90 g/m²)
Tray 2: 50 sheets (90 g/m²)
Dimensions (WxDxH) (mm)
491.9 x 469.5 x 226.5
Weight (kg)
1.5
POST INSERTER PI-505 Option for FS-535
Function
Pre-printed page insertion, manual stapling, half fold and punching
Paper Size
Upper Tray: A5 lengthwise up to A4 (B5)
Lower Tray: A5 lengthwise up to A3+ (311 x 457 mm)
Paper Weight
60 – 209 g/m²
Capacity
Max. stack capacity 200 sheets 80 g/ m²
Dimensions (WxDxH) (mm)
511 x 635 x 220
Weight (kg)
10,5
Remark
Cannot be used together with JS-602

16
Product Guide ineo+224/284/364/454/554
Z-FOLD UNIT ZU-606 Option for FS-535
Hole Punching
Punch Method
On-line, page by page, 2 / 4 hole switching type
Hole Diameter
6.5 mm ± 0,5 mm
Paper Size
2 holes: A3, B4, A4 C/L, B5 C/L, A5 C/L
4 holes: A3, B4, A4 C, B5 C
Paper Weight
60 – 90 g/m²
Folding
Type
Z-fold
Paper Size
A3, B4
Paper Weight
60 – 90 g/m²
Dimensions (WxDxH) (mm)
169 x 1028 x 660
Weight (kg)
45
Remark
Although punching is included, PK-521 can be attached to FS-535 in
addition. This will allow also punching for paper, fed in via the Page
Inserter PI-505
INNER OUTPUT TRAY OT-506 Option ineo+454/554
Standard ineo+224/284/364
Remark
If no finisher is attached the OT-506 is always required.
FAX KIT FK-511 Option
Specifications
Please refer to the chapter “Fax Specifications”
Remark
To connect a 2nd Fax Kit no further options are required.
STAMP UNIT SP-501 Option for DF-627/DF-701
Function
Attached to DF-624/DF-701 and marks every fax original which is
scanned for transmission
SPARE TX MARKER STAMP 2 Spare Stamp for SP-501
Remark
Spare Stamp for SP-501

17
Product Guide ineo+224/284/364/454/554
WORKING TABLE WT-506 Option
Function
To place the Authentication Unit
SECURITY KIT SC-508 Option
Function
Copy Guard + Pass Word Copy, Security pattern search
USB HOST BOARD EK-606 Option
Function
USB interface for USB Keyboard
Remark
For USB Direct Print support.
USB HOST BOARD + Bluetooth
EK-607 Option
Function
USB interface for key board & Bluetooth for Mobile
Remark
Speaker included
BIOMETRIC AUTHENTICATION UNIT
AU-102 Option
Function
Authentication by finger vein scanner
LICENSE KEY LK-101v3 Option
Function
Web Browser Function
Remark
Upgrade Kit UK-204 is required in addition
LICENSE KEY LK-102v3 Option
Function
PDF Encryption Function, PDF/A support
Remark
Upgrade Kit UK-204 is required in addition
LICENSE KEY LK-105v3 Option
Function
Searchable PDF, searchable PPTX, PDF/A 1b
Remark
Upgrade Kit UK-204 is required in addition

18
Product Guide ineo+224/284/364/454/554
LICENSE KEY LK-106 Option
Function
Bar Code Fonts
Remark
Upgrade Kit UK-204 is required in addition
LICENSE KEY LK-107 Option
Function
Unicode Font
Remark
Upgrade Kit UK-204 is required in addition
LICENSE KEY LK-108 Option
Function
OCR Font
Remark
Upgrade Kit UK-204 is required in addition
UPGRADE KIT UK-204 Option for LK-101v3/LK-102v3/LK-105v3/LK-106/LK-107/LK-108
Capacity
2 GB
Remark
Required in addition, when License Keys are to be used
KEYBOARD HOLDER KH-101 Option
Function
To place the optional USB keyboard (keyboard is procured locally by
countries)
FIERY CONTROLLER IC-414 Option for ineo+284/364/454/554
Specifications
Please refer to the chapter “Fiery Specifications”
VIDEO INTERFACE KIT VI-506
Option for ineo+284/364/454/554
Function
Required to connect IC-414

19
Product Guide ineo+224/284/364/454/554
C
Co op pi ie er r S Sp pe ec ci if fi ic ca at ti io on ns s
ineo+554 ineo+454 ineo+364 ineo+284 ineo+224
Main Switch ON
WARM-UP TIME Sub Switch ON
22 sec. or
less 25 sec. or less 20 sec. or less
22 sec. or
less 25 sec. or less 20 sec. or less
FIRST COPY Colour [sec. or less]
Monochrome [sec. or less]
4.6
4.1 5.5 4.6 6.9 5.3 7.7 5.9 8.3 6.9
COPY SPEED
A4 crosswise mono/colour
(simplex/duplex)
55 ppm 45 ppm 36 ppm 28 ppm 22 ppm
A4 crosswise mono/colour from Bypass
(simplex/duplex)
51/53 ppm 44 ppm 36 ppm 28 ppm 22 ppm
A3 monochrome/colour (simplex/duplex)
27.5 22.6 18 14 14
SCAN RESOLUTION 600 x 600 dpi
PRINT RESOLUTION 1800 x 600 dpi equivalent/1200 x 1200 dpi
MEMORY 2 GB std.
4 GB max. (2 GB for iOption)
HDD 250 GB
GRADATION 256
ZOOM 25 – 400 % adjustable in 0,1 % steps
MULTI COPY 1 – 9999, count up, interruption capability
DENSITY ADJUSTMENT Automatic, Manual (9 steps)
IMAGE LOSS Leading edge: 4.2 mm or less
Trailing edge: 3 mm or less
Both sides: 3 mm or less
POWER REQUIREMENT 220 - 240 V / 50/60 Hz / 8 A (Zeus 1,2,3), 9 A (Zeus X/0)
POWER CONSUMPTION 2.0 kw or less 1.58 kw or less
COPIER DIMENSIONS (W x D x H) mm
615 x 685 x 921 (incl. DF-
701) 615 x 685 x 779 (w/o Original Cover)
COPIER WEIGHT (kg) Approx. 101 Approx. 85

20
Product Guide ineo+224/284/364/454/554
FEATURE LIST
2in1/4in1/8in1
Yes
AMS/APS
Yes
Book Copy
Yes
Booklet Creation
Yes
Chapter Insertion
Yes
Continuous Number Stamping
Yes
Cover Mode
Yes
X/Y Independent Zoom
Yes
Distribution Numbering
Yes
Edge / Frame / Fold Line Erase
Yes
Image Insertion
Yes
Image Repeat
Yes
Image Shift
Yes
Image Rotation
Yes
Program Job
Yes
Non-Image Area Erase
Yes
OHP Interleaving
Yes
Overlay
Yes
Page Insertion
Yes
Positive-Negative-Mode
Yes
Date Stamp / Page Stamp
Yes / Yes
Electronic Print/Rotation Print Out/Criss
/Cross Sorting
Yes