Develop ineo 3320 User manual

Q
uick Re
f
erence
ineo 3320

Quick Reference
- 2 -
Contents
1—Learning about the printer ....................................................................................................................... 5
Using the printer control panel.................................................................................................................. 5
Understanding the colors of the Sleep button and indicator lights ........................................................... 6
2—Loading paper and specialty media......................................................................................................... 7
Setting the paper size and type ................................................................................................................ 7
Configuring Universal paper settings........................................................................................................ 7
Loading trays ............................................................................................................................................ 7
Loading the multipurpose feeder ............................................................................................................ 12
Linking and unlinking trays ..................................................................................................................... 17
Linking and unlinking trays ................................................................................................................. 17
Creating a custom name for a paper type.......................................................................................... 17
Assigning a custom paper type name ................................................................................................ 18
Assigning a custom paper type .......................................................................................................... 18
3—Printing................................................................................................................................................... 20
Printing a document................................................................................................................................ 20
Printing a document............................................................................................................................ 20
Adjusting toner darkness.................................................................................................................... 21
Canceling a print job ............................................................................................................................... 22
Canceling a print job from the printer control panel ........................................................................... 22
Canceling a print job from the computer ............................................................................................ 22
4—Copying ................................................................................................................................................. 23
Making copies......................................................................................................................................... 23
Making a quick copy........................................................................................................................... 23
Copying using the ADF ...................................................................................................................... 23
Copying using the scanner glass ....................................................................................................... 23
Copying photos....................................................................................................................................... 24
Canceling a copy job .............................................................................................................................. 24

Quick Reference
- 3 -
Canceling a copy job from the printer control panel........................................................................... 24
5—E-mailing................................................................................................................................................ 25
Setting up the printer to e-mail................................................................................................................ 25
Setting up the e-mail function............................................................................................................. 25
Configuring e-mail settings................................................................................................................. 25
Creating an e-mail shortcut..................................................................................................................... 25
Creating an e-mail shortcut using the Embedded Web Server.......................................................... 25
Canceling an e-mail ................................................................................................................................ 26
6—Faxing.................................................................................................................................................... 27
Sending a fax.......................................................................................................................................... 27
Sending a fax using the printer control panel..................................................................................... 27
Sending a fax using the computer...................................................................................................... 27
Sending a fax using a shortcut number.............................................................................................. 28
Sending a fax using the address book ............................................................................................... 28
Sending a fax at a scheduled time ..................................................................................................... 29
Creating a fax destination shortcut ......................................................................................................... 29
Creating a fax destination shortcut using the Embedded Web Server .............................................. 29
Canceling an outgoing fax ...................................................................................................................... 30
Canceling a fax job while the original documents are still scanning .................................................. 30
Canceling a fax job after scanning the original documents................................................................ 30
7—Scanning................................................................................................................................................ 31
Scanning to an FTP address .................................................................................................................. 31
Scanning to an FTP address.............................................................................................................. 31
8—Clearing jams......................................................................................................................................... 32
Avoiding jams.......................................................................................................................................... 32
Understanding jam messages and locations.......................................................................................... 33
[x]-page jam, open front door. [20y.xx] ................................................................................................... 35
[x]-page jam, open rear door. [20y.xx].................................................................................................... 38
[x]-page jam, clear standard bin. [20y.xx]............................................................................................... 39
[x]-page jam, remove tray 1 to clear duplex. [23y.xx]............................................................................. 40

Quick Reference
- 4 -
[x]-page jam, open tray [x]. [24y.xx]........................................................................................................ 41
[x]-page jam, clear manual feeder. [25y.xx]............................................................................................ 42
[x]-page jam, open automatic feeder top cover. [28y.xx]........................................................................ 43

Quick Reference
- 5 -
1—Learning about the printer
Using the printer control panel
Use the
To
1
Display
•View the printer status and messages.
•Set up and operate the printer.
2
Arrow buttons
Scroll up and down or left and right.
3
Select button
•Select menu options.
•Save settings.
4
Address book button
View all the stored addresses.
5
Redial button
View the last number dialed.
6
Keypad
Enter numbers, letters, or symbols.
7
Sleep button
Enable Sleep mode or Hibernate mode.
Do the following to wake the printer from Sleep
mode:
•Press (Sleep button).
•Send a print job from the computer.
•Perform a power-on reset using the main power
switch.
•Receive a fax.
8
Cancel button
Cancel all printer activity.
9
Start button
Start a job, depending on which mode is selected.

Quick Reference
- 6 -
Use the
To
10
Fax button
Send faxes.
11
Back button
Return to the previous screen.
12
Home button
Go to the home screen.
13
Indicator light
Check the status of the printer.
Understanding the colors of the Sleep button and indicator
lights
The colors of the Sleep button and indicator lights on the printer control panel signify a certain printer
status or condition.
Indicator light color and its corresponding printer status
Indicator light
Printer status
Off
The printer is off or in Hibernate mode.
Blinking green
The printer is warming up, processing data, or printing.
Solid green
The printer is on, but idle.
Blinking red
The printer requires user intervention.
Sleep button light color and its corresponding printer status
Sleep button light
Printer status
Off
The printer is off, idle or in Ready state.
Solid amber
The printer is in Sleep mode.
Blinking amber
The printer is entering or waking from Hibernate mode.
Blinking amber for 0.1 second, then goes
completely off for 1.9 seconds in a slow,
pulsing pattern
The printer is in Hibernate mode.

Quick Reference
- 7 -
2—Loading paper and specialty media
Setting the paper size and type
1. From the printer control panel, navigate to:
>Settings > >Paper Menu > >Paper Size/Type >
2. Press the up or down arrow button to select the tray or feeder, and then press .
3. Press the up or down arrow button to select the paper size, and then press .
4. Press the up or down arrow button to select the paper type, and then press to change the
settings.
Configuring Universal paper settings
The Universal paper size is a user-defined setting that lets you print on paper sizes that are not preset in
the printer menus.
Notes:
•The smallest supported Universal paper size is 76.2 x 127 mm (3 x 5 inches), and is supported only
from the multipurpose feeder.
•The largest supported Universal paper size is 215.9 x 355.6 mm (8.5 x 14 inches), and is supported
from all paper sources.
1. From the printer control panel, navigate to:
>Settings > >Paper Menu > >Universal Setup > >Units of Measure > >
select a unit of measure >
2. Select Portrait Width or Portrait Height, and then press .
3. Press the left or right arrow button to change the setting, and then press .
Loading trays
CAUTION—POTENTIAL INJURY: To reduce the risk of equipment instability, load each tray
separately. Keep all other trays closed until needed.
1. Pull out the tray completely.
Note: Do not remove trays while a job prints or while Busy appears on the printer display. Doing so
may cause a jam.

Quick Reference
- 8 -
2. Squeeze and then slide the width guide tab to the correct position for the size of the paper you are
loading.

Quick Reference
- 9 -
3. Squeeze and then slide the length guide tab to the correct position for the size of the paper you are
loading.
Notes:
- For some paper sizes like letter, legal, and A4, squeeze and slide the length guide tab backward
to accommodate their length.
- When loading legal-size paper, the length guide extends beyond the base leaving the paper
exposed to dust. To protect the paper from dust, you can purchase a dust cover separately. For
more information, contact technical support.
- If you are loading A6-size paper in the standard tray, then squeeze and then slide the length
guide tab toward the center of the tray to the A6-size position.
- Make sure the width and length guides are aligned with the paper size indicators on the bottom of
the tray.

Quick Reference
- 10 -
4. Flex the sheets back and forth to loosen them, and then fan them. Do not fold or crease the paper.
Straighten the edges on a level surface.
5. Load the paper stack.
Notes:
- Load with the printable side facedown when using recycled or preprinted paper.
- Load prepunched paper with the holes on the top edge toward the front of the tray.

Quick Reference
- 11 -
- Load letterhead facedown, with the top edge of the sheet toward the front of the tray. For two-
sided printing, load letterhead faceup with the bottom edge of the sheet toward the front of the
tray.
- Make sure the paper is below the maximum paper fill indicator located on the side of the width
guide.
6. Insert the tray.
7. From the printer control panel, set the paper size and paper type in the Paper menu to match the
paper loaded in the tray.
Note: Set the correct paper size and type to avoid paper jams and print quality problems.

Quick Reference
- 12 -
Loading the multipurpose feeder
Use the multipurpose feeder when printing on different paper sizes and types or specialty media, such as
card stock, transparencies, and envelopes. You can also use it for single-page print jobs on letterhead.
1. Open the multipurpose feeder.
a. Pull the multipurpose feeder extender.

Quick Reference
- 13 -
b. Pull the extender gently so that the multipurpose feeder is fully extended and open.
2. Squeeze the tab on the left width guide, and then move the guides for the paper you are loading.
3. Prepare the paper or specialty media for loading.
- Flex sheets of paper back and forth to loosen them, and then fan them. Do not fold or crease the
paper. Straighten the edges on a level surface.

Quick Reference
- 14 -
- Hold transparencies by the edges. Flex the stack of transparencies back and forth to loosen them,
and then fan them. Straighten the edges on a level surface.
Note: Avoid touching the printable side of the transparencies. Be careful not to scratch them.
- Flex the stack of envelopes back and forth to loosen them, and then fan them. Straighten the
edges on a level surface.
4. Load the paper or specialty media.
Notes:
- Do not force paper or specialty media into the multipurpose feeder.
- Make sure the paper or specialty media is below the maximum paper fill indicator located on the
paper guides. Overfilling may cause paper jams.

Quick Reference
- 15 -
- Load paper, transparencies, and card stock with the recommended printable side faceup and the
top edge entering the printer first. For more information on loading transparencies, see the
packaging that the transparencies came in.
Note: When loading A6-size paper, make sure the multipurpose feeder extender rests lightly
against the edge of the paper so that the last few sheets of paper remain in place.

Quick Reference
- 16 -
- Load letterhead faceup with the top edge entering the printer first. For two-sided (duplex) printing,
load letterhead facedown with the bottom edge entering the printer first.
- Load envelopes with the flap on the left side facedown.
Warning—Potential Damage: Never use envelopes with stamps, clasps, snaps, windows,
coated linings, or self-stick adhesives. These envelopes may severely damage the printer.
5. From the printer control panel, set the paper size and paper type in the Paper menu to match the
paper or specialty media loaded in the multipurpose feeder.

Quick Reference
- 17 -
Linking and unlinking trays
Linking and unlinking trays
1. Open a Web browser, and then type the printer IP address in the address field.
Notes:
- View the printer IP address on the printer control panel in the TCP/IP section under the
Network/Ports menu. The IP address appears as four sets of numbers separated by periods,
such as 123.123.123.123.
- If you are using a proxy server, then temporarily disable it to load the Web page correctly.
2. Click Settings >Paper Menu.
3. Change the paper size and type settings for the trays you are linking.
- To link trays, make sure the paper size and type for the tray match that of the other tray.
- To unlink trays, make sure the paper size or type for the tray does not match that of the other tray.
4. Click Submit.
Note: You can also change the paper size and type settings using the printer control panel. For more
information, see Setting the paper size and type.
Warning—Potential Damage: Paper loaded in the tray should match the paper type name assigned in
the printer. The temperature of the fuser varies according to the specified paper type. Printing issues may
occur if settings are not properly configured.
Creating a custom name for a paper type
Using the Embedded Web Server
1. Open a Web browser, and then type the printer IP address in the address field.
Notes:
- View the printer IP address in the TCP/IP section in the Network/Ports menu. The IP address
appears as four sets of numbers separated by periods, such as 123.123.123.123.
- If you are using a proxy server, then temporarily disable it to load the Web page correctly.
2. Click Settings >Paper Menu >Custom Names.
3. Select a custom name, and then type a new custom paper type name.
4. Click Submit.
5. Click Custom Types, and then verify if the new custom paper type name has replaced the custom
name.

Quick Reference
- 18 -
Using the printer control panel
1. From the printer control panel, navigate to:
>Settings > >Paper Menu > >Custom Names
2. Select a custom name, and then type a new custom paper type name.
3. Press .
4. Press Custom Types, and then verify if the new custom paper type name has replaced the custom
name.
Assigning a custom paper type name
Using the Embedded Web Server
1. Open a Web browser, and then type the printer IP address in the address field.
Notes:
- View the printer IP address in the TCP/IP section in the Network/Ports menu. The IP address
appears as four sets of numbers separated by periods, such as 123.123.123.123.
- If you are using a proxy server, then temporarily disable it to load the Web page correctly.
2. Click Settings >Paper Menu >Custom Names.
3. Type a name for the paper type, and then click Submit.
4. Select a custom type, and then verify that the correct paper type is associated with the custom name.
Note: Plain Paper is the factory default paper type for all user-defined custom names.
Using the printer control panel
1. From the printer control panel, navigate to:
>Settings > >Paper Menu > >Custom Names
2. Type a name for the paper type, and then press .
Assigning a custom paper type
Using the Embedded Web Server
1. Open a Web browser, and then type the printer IP address in the address field.
Notes:
- View the printer IP address in the TCP/IP section in the Network/Ports menu. The IP address
appears as four sets of numbers separated by periods, such as 123.123.123.123.
- If you are using a proxy server, then temporarily disable it to load the Web page correctly.

Quick Reference
- 19 -
2. Click Settings >Paper Menu >Custom Types.
3. Select a custom paper type name, and then select a paper type.
Note: Paper is the factory default paper type for all user-defined custom names.
4. Click Submit.
Using the printer control panel
1. From the printer control panel, navigate to:
>Settings > >Paper Menu > >Custom Types
2. Select a custom paper type name, and then select a paper type.
Note: Paper is the factory default paper type for all user-defined custom names.
3. Press .

Quick Reference
- 20 -
3—Printing
Printing a document
Printing a document
1. From the Paper menu on the printer control panel, set the paper type and size to match the paper
loaded.
2. Send the print job:
For Windows users
a. With a document open, click File >Print.
b. Click Properties, Preferences, Options, or Setup.
c. Adjust the settings, if necessary.
d. Click OK >Print.
Note: For details on the printing preferences settings, refer to the Help for the Driver.