DeviceGate Technology BT-Pusher WiFi Marketing Device User manual

BT-Pusher WiFi Marketing Device
User Guide
Version 1.0.0
DeviceGate Technology Co.,Ltd
Web http://www.BT-Pusher.com
http://www.BT-Pusher.com.cn
Add Room 4032,HaoJing Building,NO.9 DaGangGongYe Road,
TianHe , GuangZhou, GuangDong, China
Mail [e-mail]
Tel [phone]
Fax [phone]

BT-Pusher WiFi Marketing device User Guide
Page 2 of 16
Content
1 Introduction......................................................................................3
1.1 Overview.................................................................................3
1.2 Function……………………………………………………………………………………………….3
1.3 Application…………………………………………………………………………………………..4
1.4 Features……………………………………………………………………………………………….5
1.5 Package Contents………………………………………………………………………………..5
2 Installation……………………………………………………………………………………………………….7
2.1 BT-Pusher WiFi Marketing Device Interface Specification….………………7
2.2 User Guide…………………………………………………………………………………………….8
2.2.1 Power……………………………………………………………………………………………….8
2.2.2 FLASH DISK Local Managerment………………………………………………….10
3 Warranty Information …….………………………………………..……………………………………15

BT-Pusher WiFi Marketing device User Guide
Page 3 of 16
1. Introduction
1.1 Overview
WiFi Marketing is a new and effective marketing method,BT-Pusher WiFi Marketing
device can Push advertisements pages to Smartphones ,laptops or Notebook(As iPhone,iPad
and so on). You can update advertising Photo or web pages to WiFi Marketing Device via flash
disk, When the users of Smartphones and laptops connect to your WiFi Marketing
device(Access Point), They can not have any online behavior(even IM application) before they
view your Advertising Pages
1.2 Function
● 1:StandAlone Work Function
● 2:Support build-in WebSite
● 3:Support DHCP Client and Server
● 4:Support Abnormal automatic recovery function
● 5:Show Device working status using LED
● 6:Transmission distance: up to 200 meters
● 7:Support Redirect to build-in website

BT-Pusher WiFi Marketing device User Guide
Page 4 of 16
● 8:Support Redirect to any internet website
● 9:Must View advertising Page before Any online behaviors
● 10:A variety of WiFi advertising methods
● 11:Support 802.11n,802.11g,802.11b wireless protocol
● 12:Download Speed up to 150Mbps.
1.3 Application
Shops and In-store Promotions ●Exhibitions
Restaurants and coffee shops ●Business center / shopping mall
Touristareas ●Hotels
Airports ●Sport events
Transportation ●Auto parts sales shop
Auto4Sshops ●Repair stations
MotorCity ●Cinemas
Housing Sales Center ●Recreation centers
Even you can think of any place, almost everywhere

BT-Pusher WiFi Marketing device User Guide
Page 5 of 16
1.4 Features
Model BT-Pusher WiFi Marketing Device
Appearance
Status indication LED status indication
Size 9cm*9cm*3cm(no include antenna)
Weight 200g
Power Input 110-240V
Storage Above 128M Byte, expanded to 1G Byte
Antenna External antenna(default 6db)
WiFi type 802.11n,802.11g,802.11b
Download speed Up to 150Mbps
Usb interface Yes
Ethernet 10/100 Ethernet
Abnormal automatic
recovery function Yes
Managerment
method
USB Flash disk local
1.5 Package Contents
Each BT-Pusher WiFi Marketing package include:
1，A BT-Pusher WiFi Marketing Device with 6dbi external antenna

BT-Pusher WiFi Marketing device User Guide
Page 6 of 16
2，A adapter(Appearance for reference only)
2. Installation
2.1 WiFi Device interface specification

BT-Pusher WiFi Marketing device User Guide
Page 7 of 16
LED：Indicate the working status of the BT-Pusher WiFi Marketing device
POWER INPUT：DC 12V 1A power adapter
USB INTERFACE：Used to connect flash disk for offline management. Please use
WiFiConfig software to modify corresponding parameters or update Ads pages
and make sure to save the results to a flash disk,then insert the flash disk into the
relevant BT-Pusher WiFi Markering Device’s USB interface, the system will
automatically set the device parameters, update Ads pages and so on. (After you
insert a flash disk,please make sure LED show a status described in section 2.2.2)
NETWORK INTERFACE：Used to connect to your local network(Router or
Switch)
2.2 User Guide
2.2.1 Power
1. Put BT-Pusher WiFi Markeing device in a safe place, Connect Antenna to its
antenna interface,use network cable connect BT-Pusher WiFI Marketing device to
your Router or Switch and Plug power adapter (DC 12V) in the power interface,
As shown below:

BT-Pusher WiFi Marketing device User Guide
Page 8 of 16
2. After power-on, LED will indicate the system status information, as follows
（1） Red LED and middle Green LED light. Indicates power supply normal
（2） After about one minute ,Middle Green LED will flash rapidly,This means
BT-Pusher WiFi marketing Device started to enter the normal work state,
Then your WiFi enabled device as iphone ,ipad, notebook will can scan and
conenct to BT-Pusher WiFI Marketing Device, and this will let you begin your
internet surfing. Enjoy it….

BT-Pusher WiFi Marketing device User Guide
Page 9 of 16
3. But You can not have any online behavior yet(Even IM,Bolg application and so on)
before they view your Advertising Pages. As below:
4. There is one “Hyper-Link” in last advertising Page, You can click last Advertising
page photo go to special internet Advertising WebSite, Even Build-in WebSite in
BT-Pusher WiFi marketing device's internal storage . if you click “Hyper-Link” in last
advertising page, You have to view Special advertising web page, as your corporate
website and so on, As Below

BT-Pusher WiFi Marketing device User Guide
Page 10 of 16
5. if you click "Continue" in last Ads page, You will be directed to the site you want to
surf(We assume that you want to www.google.com before you view advertising
page ).as below:

BT-Pusher WiFi Marketing device User Guide
Page 11 of 16
6. then you can begin your IM chat, web surfing….… Enjoy it!!
if you want to change your Ads page content,Build-in website and config
system parameter, please use WiFiConfig software to do it .
2.2.2 FLASH DISK Local Managerment
BT-Pusher WiFi Marketing Device has flash disk local management functions,
through flash disk operation can update the system configuration information, modify the Ads
pages content, upload build-in website and so on.
1: Need to use the WiFiConfig configuration software for the relevant operation.
WiFiConfig software on WiFiConfig directory:

BT-Pusher WiFi Marketing device User Guide
Page 12 of 16
（1） Double-click to open WiFiConfig.exe software, will appear below the
window, first click on the “new config” to build a new project, and then
according to your needs to configure your device.
（2） Second, click “Add Device”, as shown below:

BT-Pusher WiFi Marketing device User Guide
Page 13 of 16
Please refer to document “WiFiConfig software User Guide” for more detailed
operation
2: AfterUsingWiFiConfig software to modify corresponding parameters or update
Ads pages contents ,Please make sure to save project and Copy to flash disk,then
insert the flash disk into the relevant BT-Pusher WiFi Marketing Device’s USB interface,
the system will automatically set the device parameters, update Ads pages contents
and Copy your website to BT-Pusher WiFi marketing device's internal storage and so
on. as shown below:

BT-Pusher WiFi Marketing device User Guide
Page 14 of 16
（1） After Flash disk inserted, BT-Pusher WiFI marketing device’s another
green LED will flashes once every half a second, as shown below, indicates
device being updated：
（2） When the last green LED stop flashing, And middle Green led will
continue to flash rapidly, indicating update has been completed, the system
will re-enter the normal working state, Only when it is normal working
state ,you can unplug the Flash disk from USB interface.

BT-Pusher WiFi Marketing device User Guide
Page 15 of 16
2.3 Installation Notes
1. Away from the high-temperature place.
2. To avoid direct sunlight.
3. Do not put damp places, to avoid the water.
4. Do not place other equipment above BT-Pusher WiFi Marketing device.
5. Bt-Pusher WiFi Marketing device should be installed in a well-ventilated place

BT-Pusher WiFi Marketing device User Guide
Page 16 of 16
3 Warranty Information
DeviceGate guarantees BT-Pusher products are free of defects for a period of 12 months
from the date of purchase. This warranty is non-transferable and applies to the original
purchaser. BT-Pusher products found to be defective will be replaced free of charge. Purchaser
is responsible for all shipping costs. For returns and warranty claims, Purchaser must first
obtain a return authorization number by sending an email to BT[email protected]
Returns or Warranty claims without a return authorization number will not be accepted.
Thank you for choosing BT-Pusher device!
Please visit our website
http://www.BT-Pusher.com
For more detailed