LevelOne WBR-6020 User manual

LevelOne
User Manual
Ver. 1.0
WBR-6020
N_Max Wireless Router

2
Safety
FCC WARNING
This equipment may generate or use radio frequency energy. Changes or modifications to this
equipment may cause harmful interference unless the modifications are expressly approved in the
instruction manual. The user could lose the authority to operate this equipment if an unauthorized
change or modification is made.
This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment generates, uses, and can
radiate radio frequency energy and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one or more of the following
measures:
1) Reorient or relocate the receiving antenna.
2) Increase the separation between the equipment and receiver.
3) Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
4) Consult the dealer or an experienced radio/TV technician for help.
CE Declaration of conformity
This equipment complies with the requirements relating to electromagnetic compatibility, EN 55022
class B for ITE, the essential protection requirement of Council Directive 89/336/EEC on the
approximation of the laws of the Member States relating to electromagnetic compatibility.
CE Marking Warning
Hereby, Digital Data Communications, declares that this product (Model-no. WBR-6020) is in
compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC.
The CE-Declaration of Conformity can be downloaded at:
http://www.levelone.eu/support.php

3
General Public License
This product incorporates open source code into the software and therefore falls under the guidelines
governed by the General Public License (GPL) agreement.
Adhering to the GPL requirements, the open source code and open source license for the source
code are available for free download at http://global.level1.com.
If you would like a copy of the GPL or other open source code in this software on a physical CD
medium, LevelOne (Digital Data Communications) offers to mail this CD to you upon request, for a
price of US$9.99 plus the cost of shipping.

4
Table of Content
TABLE OF CONTENT .................................................................................................................................................4
1. INTRODUCTION...................................................................................................................................................5
USER MANUAL OVERVIEW ...........................................................................................................................................5
2. UNPACKING AND SETUP...................................................................................................................................6
FEATURES...................................................................................................................................................................6
PACKAGE CONTENTS...................................................................................................................................................6
3. HARDWARE INSTALLATION..............................................................................................................................7
FRONT VIEW ...............................................................................................................................................................7
REAR VIEW .................................................................................................................................................................8
HARDWARE INSTALLATION ...........................................................................................................................................9
4. CHECK YOUR NETWORK SETTINGS..............................................................................................................12
5. CONFIGURATION WIZARD...............................................................................................................................13
6. ADVANCED SETUP ...........................................................................................................................................18
BASIC SETTING .........................................................................................................................................................19
Green Function....................................................................................................................................................20
Primary Setup......................................................................................................................................................22
DHCP Server.......................................................................................................................................................27
Wireless Settings.................................................................................................................................................28
Change Password ...............................................................................................................................................39
FORWARDING RULES.................................................................................................................................................40
Virtual Server.......................................................................................................................................................41
Special AP...........................................................................................................................................................42
Miscellaneous Items............................................................................................................................................43
SECURITY SETTINGS..................................................................................................................................................44
Packet Filter.........................................................................................................................................................45
Packet Filter.........................................................................................................................................................45
Domain Filter .......................................................................................................................................................47
URL Blocking.......................................................................................................................................................48
MAC Address Control..........................................................................................................................................49
Miscellaneous Items............................................................................................................................................51
ADVANCED SETTINGS................................................................................................................................................52
System Log..........................................................................................................................................................53
Dynamic DNS......................................................................................................................................................54
QoS Rule.............................................................................................................................................................55
SNMP Setting......................................................................................................................................................56
Routing ................................................................................................................................................................57
System Time........................................................................................................................................................59
Schedule Rule .....................................................................................................................................................60
TOOLBOX..................................................................................................................................................................62
System Info..........................................................................................................................................................63
Firmware Upgrade...............................................................................................................................................64
Backup Setting ....................................................................................................................................................64
Reset to Default...................................................................................................................................................64
Reboot.................................................................................................................................................................64
Miscellaneous Items............................................................................................................................................65
TECHNICAL SPECIFICATIONS................................................................................................................................76
Default Settings
IP Address
192.168.0.1
Password
password
Wireless Mode
Enable
Wireless SSID
WBR-6020
Wireless Security
None

5
1. Introduction
Congratulations on your purchase of LevelOne WBR-6020 N_Max Wireless Router. This product is
specifically designed for Small Office and Home Office needs. It provides a complete SOHO solution
for Internet surfing, and is easy to configure and operate even for non-technical users.
Instructions for installing and configuring this product can be found in this manual. Before you install
and use this product, please read the manual carefully for fully exploiting the functions of this product.
User Manual Overview
Introduction
Describes the N_Max Wireless Router.
Unpacking and Setup
Helps user to get started with the basic installation of the router.
Hardware Installation
Describes the LED indicators router.
Configuration
Describes the functionalities and its settings.
Technical Specifications
Lists the technical (general, physical and environmental)
specifications of the router.

6
2. Unpacking and Setup
This chapter provides the package contents and setup information for the N_Max Wireless Router.
Features
Smart Power Saving Features and Wireless Disable button
Delivers N_Max Wireless Performance at up to 300Mbps using Draft N 2.0
Increased Wireless Range with MIMO Technology
Auto-Channel Selection to avoid interference from neighbors
Simple Security Control with One-Button WPS Protection
Advanced Firewall and Traffic Priority Features.
Quick and Easy Installation Wizard
Package Contents
Open the box of the N_Max Wireless Router and carefully unpack it. The box should contain the
following items:
WBR-6020 N_Max Wireless Router
Power Adapter
Cat.5 Cable
Antenna x2
CD Manual / Utility
Quick Installation Guide
If any item is found missing or damaged, please contact your local reseller for replacement.

7
3. Hardware Installation
Front View
WLAN Button
Press and hold for 3 seconds to turn the Wireless LAN on or off.
Please confirm WLAN status as indicated by WLAN Light
Status Light
A steady blinking light indicates the device is ready
WAN Light
A solid light indicates the WAN port is connected.
WLAN Light
Off indicates Wireless LAN is turned off, or no wireless client is
connected to the router.
LED blinks during wireless data transmission, or when there is a
wireless client connected to the router.
Fast and Steady blinking indicates WPS function is activated and the
router is pairing with wireless client.
LAN Lights
A solid light indicates to an Ethernet enable computer on ports 1 ~ 4.
LED blinks during data transmission.
Sleep Light
When solid light (orange) means that the router is in sleep mode.
WPS Button
Wi-Fi Protected Setup push button. Press to activate WPS pairing with
wireless client.
Reset (WLAN and
WPS Buttons)
Press the WLAN and WPS buttons together for 5 seconds to reboot
and restore the device to factory default settings.

8
Rear View
Power Jack
Receptor for the supplied power adapter
LAN Ports (1~4)
Connect Ethernet devices such as computers, switches or hubs.
WAN Port
The WAN port is the connection for the Ethernet cable to the Cable or
DSL Modem.
Sleep Button
This button is used to force the router to enter sleep mode, or wake up.
It has the highest priority and overrides the Power Saving Schedule.
Antennas
Detachable antennas allows users to change antenna if necessary.

9
Hardware Installation
Decide where to place your Wireless Router
You can place your Wireless Router on a desk or other flat surface. For optimal performance, place
your Wireless Router in the center of your office (or your home) in a location that is away from any
potential source of interference, such as a metal wall or microwave oven. This location must be close
to power and network connection.
1. Attach the included antennas.
2. Connect your broadband internet connection to WBR-6020’s WAN port.
ADSL / Cable Modem
Internet

10
3. Connect the Computer LAN cable.
4. Plug in the Power Adapter

11
5. Wait until the Status light is blinking steadily.
This means the router is ready for use.

12
4. Check Your Network Settings
1. Please make sure your PC can get IP address automatically so the WBR-6020 can communicate
with your PC during configuration.
Select “Control Panel” > “Network Connections”.
Right click the “Local Area Connection” and choose “Properties”.
Select the TCP/IP protocol for your network card.
Click on the Properties button. You should then see the following screen and make sure you
have selected “Obtain IP address automatically”
2. Reboot computer to make sure you have received the IP address correctly.

13
5. Configuration Wizard
Once properly configured, the WBR-6020 N_Max Wireless Router will obtain and assign IP address
information automatically. Configuration settings can be established through the Web-Based
Configuration Menu, or the Easy Setup Utility on the CD.
Easy Setup Utility
Insert the CD into your CD-ROM drive of your computer.
The autorun program should start automatically.
If it does not, please run autorun.exe on your CD.
In the autorun screen, click Utility to begin the Easy Setup Utility.

14
Web-Based Configuration
Open a web browser (Internet Explorer/Firefox/Safari) and type in the IP Address
http://192.168.0.1
Note:
If you have changed the default IP Address assigned to the WBR-6020, ensure you enter the
correct IP Address.
Type in “password” (without quotes) in the Password box, Then click Login
Note: password is the default login password for the unit.
The user can setup step by step to finish the connection with Wizard.
If you are an advanced user, you can access the configurations directly in the Advanced Setup

15
Setup Wizard will guide you through a basic configuration procedure step by step. Press Next to
begin.

16
Remember to set up the Sleep Mode to enable the Power Saving features.

17
Once the user finishes those steps and the router screen displayed as below. It means that the
Internet connection is now established.

18
6. Advanced Setup
To access the Advanced Setup, click on Advanced Setup at the top of the page.
Or, for first time installation, choose Advanced Setup and click Enter.
Once in the Advanced Setup, you will be presented with the following menu.

19
Basic Setting
These are the basic settings of the unit. Click on the menu on the left to access the respective
settings page.

20
Green Function
The Power Saving function allows you to set the time that the router enters into Sleep Mode.
This means that the router can automatically power on and off at user specified times.