Dewenwils HCRA50A User manual

Thank you for your purchase.
Please contact us if you have any problem.
Email: [email protected]
Please attach your User Name or Order ID so that
we can assist you better.
Retractable Cord Reel
Instruction Manual
01
◆ Warning: To reduce the risk of fire, electric shock or personal injury,
please strictly follow the instructions.
◆ Mounting Instructions:
1. Do not connect any devices which may exceed the maximum ratings of
this cord reel. If the circuit breaker is disconnection due to overload, please
reduce the current of electrical appliances which you have used, then
press the switch on the circuit breaker to complete the connection.
2. Do not try to plug it in when your hands are wet or damp.
3. Never attempt to plug the cord reel into a non-grounded outlet.
4. When pulling the cord from the cord reel, grasp the reel
’
s cord itself,
but not the device or tool that the cord is plugged into.
5. Do not allow the cable to retract without restraining the retraction speed
as damage or injury may occur from excessive rewind speed.
6. Inspect before every use; do not use if parts are loose or damaged or if
insulation is worn.
7. Always unplug the retractable reel from its electrical outlet before
performing any maintenance or changing accessories.
8. Do not disassemble the body of the reel.
9. Children are not allowed to use the cord reel.
1. Select a mounting location within 2 feet of an electrical outlet. The outlet
for a garage door opener is ideal.
2. Drywall will not hold the weight of the cord reel. It is necessary to locate
a ceiling joist or wall stud.
3. Use the mounting hardware as a template and mark the holes, so they
are centered on the ceiling joist or stud.
4.
Attach the mounting bracket by using the two wood screws provided.
5.
Align the holes on the mounting bracket with the holes on the side of the
reel and insert the pin.
6. Place the retaining ring on the pin and twist until the entire ring is through
the hole in the pin. NEVER operate the reel without the retaining ring in
place.

02
◆ Specifications
◆ Operation
Input Voltage:125VAC, 60Hz
Max Power Rating: 10A, 1250W
Cord:16AWG, SJTW
Lead-in Cord Length: 4 FT
Circuit Breaker Rated Current: 10A
Length: 30 FT
Figure1: Mounting Modes
1. Plug the lead-in cord into the grounded outlet.
2. Pull cord out to the desired length. Notice a clicking noise when pulling
the cord. The cord will stay at the desired length during the clicking and
rewind after a pull past the clicking noise.
3.
4.
To retract, pull the cord out and guide it slowly back into the reel.
If the Circuit breaker is disconnection due to overload, please reduce the
current of electrical appliances which you have used, then press the switch
on the circuit breaker to connection.
NOTE:
Cord length is 30 feet long fully extended. DO NOT keep on pulling the
cord after it is fully extended.
03
One-year Limited Warranty
Dewenwils warrants this product to be free from defects in material and
workmanship for a period of one year from the date of purchase. Warranty is
void if damage is caused by misuse or improper installation. Please contact
us if you have any questions.
Email: [email protected]
Our dedicated customer service team will get back to you within 24 hours.
◆
◆
Package Includes
Cord Reel x 1
Instruction Manual x 1
Wood Screw x 2
Bracket x 1
Pin x 1
Retaining Ring x 1