DEWESOFT V21-1 User manual

SIRIUSi XHS-PWR
SAFETY REFERENCE MANUAL
SIRIUSi XHS-PWR V21-1
SIRIUS XHS-PWR 1/10

SIRIUSi XHS-PWR
SAFETY REFERENCE MANUAL
1. Table of contents
1. Table of contents 2
2. About this document 3
2.1. Legend 3
2.2. Online versions 3
2.2.1. Device Technical Reference Manual 3
2.2.2. DEWESoft® User Manual 3
3. Safety instructions 4
3.1. General safety and hazard warnings for all Dewesoft systems 6
4. Notice 9
4.1. Warranty information 9
4.2. Calibration 9
4.3. Support 9
4.4. Service/repair 9
4.5. Restricted Rights 9
4.6. Printing History 10
4.7. Copyright 10
4.8. Trademarks 10
4.9. Documentation version history 10
SIRIUS XHS-PWR 2/10

SIRIUSi XHS-PWR
SAFETY REFERENCE MANUAL
2. About this document
This is the user manual for SIRIUSi XHS-PWR module.
2.1. Legend
The following symbols and formats will be used throughout the document and/or are used on the
module.
Caution
Indicate that the current situation needs operator awareness or operator action in order to avoid
undesirable consequences. Consult manuals and follow all instructions.
Caution, hot surface
Indicate that the item can be hot and should not be touched without taking care.
Caution, risk of electric shock
Follow all instructions to avoid electrical shock.
2.2. Online versions
2.2.1. Device Technical Reference Manual
The most recent version of this manual can be downloaded from our homepage:
https://download.dewesoft.com/list/manuals-brochures/hardware-manuals
In the Hardware Manuals section click the download link for the Device® technical reference manual.
2.2.2. DEWESoft® User Manual
The DEWESoft® User Manual document provides basics and additional information and examples for
working with DEWESoft® and certain parts of the program.
The latest version of the DEWESoft® tutorials can be found here:
https://download.dewesoft.com/list/manuals-brochures/software-manuals
In the Software Manuals section click the download link of the DEWESoft X User Manual entry.
SIRIUS XHS-PWR 3/10

SIRIUSi XHS-PWR
SAFETY REFERENCE MANUAL
3. Safety instructions
Your safety is our primary concern! Please be safe! Read carefully following instructions and use
common sense when operating the equipment.
Warning
The following general safety precautions must be observed during all phases of operation, service, and
maintenance of this product. Failure to comply with these precautions or with specific warnings
elsewhere in the product manuals violates safety standards of design, manufacture, and intended use of
the product. Dewesoft d.o.o. assumes no liability for the customer’s failure to comply with these
requirements.
If accessories for the product are available they are not covered with following instructions. Please read
the safety manual for the accessory.
Only trained persons can operate, make maintenance or service actions.
Product safety isolation relies on reliable safety ground connection. Before any other
cable attachment please connect product safety ground first to the system safety
ground. When removing the product, safety ground connection shall be removed last.
Not grounding the product reduces safety isolation of the product and can lead to
electrical shock in case of product malfunction.
When operating high voltage in excess of 1000V and high currents can be present inside
of the product.
Newer do any servicing or maintenance actions if power cables are live to prevent
electrical shock or arc as a result of current flow or its interruption.
Before any work on the product check that surface temperature is safe for handling.
During operation at high currents product internal and surface temperature can increase
a lot. This combined with potential high ambient temperature can lead to product
surface temperature exceeding safe touch temperature.
Before any work on a product check that all power sources are off. If power sources are
not under visual control of the servicing person use safety locks to prevent unintended
power source turn on. Install safety warnings at power switch location that maintenance
is going on and try to inform all persons with access to the power source about intended
operation.
Newer open any cover on the products which have power cables already supplied with
the product. There are no serviceable parts inside. All repairs or calibration must be done
at the Dewesoft or Dewesoft approved service centres (lista servisov. ce obstaja)
SIRIUS XHS-PWR 4/10

SIRIUSi XHS-PWR
SAFETY REFERENCE MANUAL
For the units where customers can connect their own cables, only cover with label XZY
can be opened. Before cover opening make sure that all above requirements are fulfilled
(disconnection from the power source, low enough surface temperature etc.). Please read
chapter XYZ in the user manual about required cable minimum cross sections for
intended currents, type of the approved wires and suitable cable lugs and nuts. Use only
specified products. Please follow all other instructions from the same chapter on how to
properly prepare and install cables.
After cable installation, cover must be attached back before the first test or use to avoid
electrical shock or burns in case of any system failure.
During first runs, after cable installation, monitor temperature in the product cable
department via Dewesoft software (link), if possible at full load, to check if temperature is
inside normal operating temperature range. Too high contact resistance, the result of bad
lug connection or poore contact to the internal bus bar can increase internal temperature
considerably. If the temperature is rising in a non normal way or is too high, immediately
disconnect power. Follow all safety precautions from this chapter and verify cables and
their connections as possible sources of the problem.
In case of any doubt please contact Dewesoft support center.
Do not use higher voltage than XZV on the product power supply pins. Power supply
input is protected for some short term transients, however longer exposure to higher
voltage levels will damage input circuit.
DO NOT use the system in rooms with flammable gases, fumes or dust or in adverse
environmental conditions.
Please follow also general safety instructions:
●DO NOT operate damaged equipment: Whenever it is assumed that the safety protection
features built into this product have been impaired, either through physical damage, excessive
moisture, or any other reason, REMOVE POWER and do not use the product until the safe
operation can be verified by service-trained personnel. If necessary, return the product to
Dewesoft sales and service office for service and repair to ensure that safety features are
maintained.
●Do not switch on the system after transporting it from a cold into a warm room and vice versa.
The thereby created condensation may damage your system. Acclimatise the system unpowered
to room temperature.
●Please contact a Dewesoft support team if you have doubts about the method of operation,
safety or the connection of the system.
●Please be careful with the product. Shocks, hits or dropping it even from low height may damage
your system.
●Please read the detailed technical reference manual as well as the security advice of the
connected systems.
●This product has left the factory in safety-related flawlessness and in proper condition. In order to
maintain this condition and guarantee safety use, the user has to consider the security advice
and warnings in this manual.
SIRIUS XHS-PWR 5/10

SIRIUSi XHS-PWR
SAFETY REFERENCE MANUAL
3.1. General safety and hazard warnings for all Dewesoft systems
Safety of the operator and the unit depend on following these rules.
●Use this system under the terms of the specifications only to avoid any possible danger.
●Read your manual before operating the system.
●Observe local laws when using the instrument.
●DO NOT touch internal wiring!
●DO NOT use higher supply voltage than specified!
●Use only original plugs and cables for harnessing.
●You may not connect higher voltages than rated to any connectors.
●The power cable and connector serve as Power-Breaker. The cable must not exceed 3 meters, the
disconnect function must be possible without tools.
●Maintenance must be executed by qualified staff only.
●During the use of the system, it might be possible to access other parts of a more comprehensive
system. Please read and follow the safety instructions provided in the manuals of all other
components regarding warning and security advice for using the system.
●With this product, only use the power cable delivered or defined for the host country.
●DO NOT connect or disconnect sensors, probes or test leads, as these parts are connected to a
voltage supply unit.
●Ground the equipment: For Safety Class 1 equipment (equipment having a protective earth
terminal), a non-interruptible safety earth ground must be provided from the mains power
source to the product input wiring terminals.
●Please note the characteristics and indicators on the system to avoid fire or electric shocks.
Before connecting the system, please read the corresponding specifications in the product
manual carefully.
●The inputs must not, unless otherwise noted (CATx identification), be connected to the main
circuit of category II, III and IV.
●The power cord separates the system from the power supply. Do not block the power cord, since
it has to be accessible for the users.
●DO NOT use the system if equipment covers or shields are removed.
●If you assume the system is damaged, get it examined by authorized personnel only.
●Adverse environmental conditions are Moisture or high humidity Dust, flammable gases, fumes
or dissolver Thunderstorm or thunderstorm conditions (except assembly PNA) Electrostatic
fields, etc.
●The measurement category can be adjusted depending on module configuration.
●Any other use than described above may damage your system and is attended with dangers like
short-circuiting, fire or electric shocks.
●The whole system must not be changed, rebuilt or opened.
●DO NOT operate damaged equipment: Whenever it is possible that the safety protection features
built into this product have been impaired, either through physical damage, excessive moisture,
or any other reason, REMOVE POWER and do not use the product until the safe operation can be
verified by service-trained personnel. If necessary, return the product to Dewesoft sales and
service office for service and repair to ensure that safety features are maintained.
●If you assume a more riskless use is not provided anymore, the system has to be rendered
inoperative and should be protected against inadvertent operation. It is assumed that a more
riskless operation is not possible anymore if the system is damaged obviously or causes strange
noises. The system does not work anymore. The system has been exposed to long storage in
adverse environments. The system has been exposed to heavy shipment strain.
SIRIUS XHS-PWR 6/10

SIRIUSi XHS-PWR
SAFETY REFERENCE MANUAL
●Warranty void if damages caused by disregarding this manual. For consequential damages, NO
liability will be assumed!
●Warranty void if damage to property or persons caused by improper use or disregarding the
safety instructions.
●Unauthorized changing or rebuilding the system is prohibited due to safety and permission
reasons (CE).
●Be careful with voltages >25 VAC or >35 VDC! These voltages are already high enough in order to
get a perilous electric shock by touching the wiring.
●The product heats during operation. Make sure there is adequate ventilation. Ventilation slots
must not be covered!
●Only fuses of the specified type and nominal current may be used. The use of patched fuses is
prohibited.
●Prevent using metal bare wires! Risk of short circuit and fire hazard!
●DO NOT use the system before, during or shortly after a thunderstorm (risk of lightning and high
energy over-voltage). An advanced range of application under certain conditions is allowed with
therefore designed products only. For details please refer to the specifications.
●Make sure that your hands, shoes, clothes, the floor, the system or measuring leads, integrated
circuits and so on, are dry.
●DO NOT use the system in rooms with flammable gases, fumes or dust or in adverse
environmental conditions.
●Avoid operation in the immediate vicinity of high magnetic or electromagnetic fields,
transmitting antennas or high-frequency generators, for exact values please refer to enclosed
specifications.
●Use measurement leads or measurement accessories aligned with the specification of the
system only. Fire hazard in case of overload!
●Lithium ion batteries are classified as not hazardous when used according to the
recommendations of the manufacturer described in Battery Safety Data Sheet, which is available
for download from this link.
●Do not switch on the system after transporting it from a cold into a warm room and vice versa.
The thereby created condensation may damage your system. Acclimatise the system unpowered
to room temperature.
●Do not disassemble the system! There is a high risk of getting a perilous electric shock.
Capacitors still might be charged, even if the system has been removed from the power supply.
●The electrical installations and equipment in industrial facilities must be observed by the security
regulations and insurance institutions.
●The use of the measuring system in schools and other training facilities must be observed by
skilled personnel.
●The measuring systems are not designed for use in humans and animals.
●Please contact a professional if you have doubts about the method of operation, safety or the
connection of the system.
●Please be careful with the product. Shocks, hits and dropping it from already- lower level may
damage your system.
●Please also consider the detailed technical reference manual as well as the security advice of the
connected systems.
EN 61326-3-1:2008
IEC 61326-1 applies to this part of IEC 61326 but is limited to systems and equipment for industrial
applications intended to perform safety functions as defined in IEC 61508 with SIL 1-3.
SIRIUS XHS-PWR 7/10

SIRIUSi XHS-PWR
SAFETY REFERENCE MANUAL
The electromagnetic environments encompassed by this product family standard are industrial, both
indoor and outdoor, as described for industrial locations in IEC 61000-6-2 or defined in 3.7 of IEC 61326-1.
Equipment and systems intended for use in other electromagnetic environments, for example, in the
process industry or in environments with potentially explosive atmospheres, are excluded from the
scope of this product family standard, IEC 61326-3-1.
Devices and systems according to IEC 61508 or IEC 61511 which are considered as “operationally
well-tried”, are excluded from the scope of IEC 61326-3-1.
SIRIUS XHS-PWR 8/10

SIRIUSi XHS-PWR
SAFETY REFERENCE MANUAL
4. Notice
The information contained in this document is subject to change without notice.
Note:
Dewesoft d.o.o. shall not be liable for any errors contained in this document. Dewesoft MAKES NO
WARRANTIES OF ANY KIND WITH REGARD TO THIS DOCUMENT, WHETHER EXPRESS OR IMPLIED.
DEWESOFT SPECIFICALLY DISCLAIMS THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
FOR A PARTICULAR PURPOSE. Dewesoft shall not be liable for any direct, indirect, special, incidental, or
consequential damages, whether based on contract, tort, or any other legal theory, in connection with
the furnishing of this document or the use of the information in this document.
4.1. Warranty information
The copy of the specific warranty terms applicable to your Dewesoft product and replacement parts can
be obtained from your local sales and service office. To find a local dealer for your country, please visit
https://dewesoft.com/support/distributors.
4.2. Calibration
Every instrument needs to be calibrated at regular intervals. The standard norm across nearly every
industry is annual calibration. Before your Dewesoft data acquisition system is delivered, it is calibrated.
Detailed calibration reports for your Dewesoft system can be requested. We retain them for at least one
year, after system delivery.
4.3. Support
Dewesoft has a team of people ready to assist you if you have any questions or any technical difficulties
regarding the system. For any support please contact your local distributor first or Dewesoft directly.
Dewesoft d.o.o.
Gabrsko 11a
1420 Trbovlje Slovenia
Europe Tel.: [phone]
Web: http://www.dewesoft.com
Email: [email protected]om
The telephone hotline is available Monday to Friday from 07:00 to 16:00 CET (GMT +1:00)
4.4. Service/repair
The team of Dewesoft also performs any kinds of repairs to your system to assure a safe and proper
operation in the future. For information regarding service and repairs please contact your local
distributor first or Dewesoft directly on https://dewesoft.com/support/rma-service.
4.5. Restricted Rights
Use Slovenian law for duplication or disclosure. Dewesoft d.o.o. Gabrsko 11a, 1420 Trbovlje, Slovenia /
Europe.
SIRIUS XHS-PWR 9/10

SIRIUSi XHS-PWR
SAFETY REFERENCE MANUAL
4.6. Printing History
Version V21-1
Released 2021
Last changed: 26/06/2021 at 13:00.
4.7. Copyright
Copyright © 2015-2021 Dewesoft d.o.o. This document contains information which is protected by
copyright. All rights are reserved. Reproduction, adaptation, or translation without prior written
permission is prohibited, except as allowed under the copyright laws. All trademarks and registered
trademarks are acknowledged to be the property of their owners.
4.8. Trademarks
We take pride in our products and we take care that all key products and technologies are registered as
trademarks all over the world. The Dewesoft name is a registered trademark. Product families
(KRYPTON, SIRIUS, DSI, DS-NET) and technologies (DualCoreADC, SuperCounter, GrandView) are
registered trademarks as well. When used as the logo or as part of any graphic material, the registered
trademark sign is used as a part of the logo. When used in text representing the company, product or
technology name, the ® sign is not used. The Dewesoft triangle logo is a registered trademark but the ®
sign is not used in the visual representation of the triangle logo.
4.9. Documentation version history
Version
Date
Notes
V21-1
26.06.2021
Initial document version.
SIRIUS XHS-PWR 10/10