Dhp 4035159uk User manual

DO NOT RETURN TO THE STORE !

Call 0844 3300948

4035159UK

B344035159UK00 - 10125 - M

Date of Purchase

Convertible

X.P. - 12/16/2014

If parts are missing or damaged, we will gladly ship your

replacement parts free of charge.

Lot Number

Thank you for purchasing from DHP!

IMPORTANT - READ CAREFULLY - RETAIN FOR FUTURE REFERENCE

Single Metal Bunk Bed

Silver

Customercare@signaturesleep.co.uk

DHFE

5 Elstree way

Borehamwood

Hertfordshire, WD6 1SF

United Kingdom

Read Before Beginning Assembly

0844 3300948

Monday - Friday

9:00 am - 5:00 pm

(London Time)

Warranty Information

B344035159UK00

Caution

DHP warrants this product to be free from defects in material and workmanship and

agrees to remedy any such defect. This warranty covers one year from the date of

original purchase. This is solely limited to the repair or replacement of defective

parts and assembly labor is not included.

This warranty does not apply to any product which has been improperly assembled,

subjected to misuse or abuse or which has been altered or repaired in any way.

Liability for consequential damages is excluded to the extent exclusion is permitted

by law. This warranty gives you specific legal rights and you may also have other

rights which vary from county to county.

To obtain warranty service, purchaser must present original bill of sale. Components

repaired or replaced are warranted through the remainder of the original warranty

period only. The defective components will be repaired or replaced without charge,

subject to the terms and conditions described above.

●Call our Customer Care phone number if you need assistance.

●Work in a spacious area, preferably on a carpet, near where the unit will be used.

●Recommended # of people needed for assembly: 2(however it is always better

to have an extra hand). Estimated assembly time is 1.5 hours.

●Make sure all parts are included. Most parts are labeled or stamped on the raw

edge.

●Read each step carefully. It is very important that each step of instruction is

performed in the correct order. If these steps are not followed in sequence,

assembly difficulties will occur.

●This product is designed for home use and not intended for commercial use.

●This product contains small components. Please ensure that they are kept away

from small children.

●Do not use power tools to assemble your furniture. Power tools may strip or

damage the parts.

●A power tool and drill bit will be required to secure the bunk to the wall.

●You will need a phillips headed screwdriver to assemble this product.

For help with assembly, identifying parts, product information or to order parts,

please contact us:

Parts

B344035159UK00

All in 1 big box!

Replacement Parts, Call 0844 3300948

Before you throw the package, please use the

Check Box to identify the parts and ensure that

you have all the parts needed for the assembly.

There are inner boxe(s) that include components

required to complete this assembly.

A B C D D

Ladder Side Rail

UK900070

X 1

Upper Post

UK920960

X 2

Upper Post

UK920970

X 1

Upper Post

UK920980

X 1

Lower Post

UK920990

X 2

Lower Post

UK921000

X 2

Rear Guardrail

UK900200

X 1

Front Guardrail

UK900210

X 1

Upper Side Rail

UK900060

X 1

End Guardrail

UK900220

X 4

Lower Side Rail

UK900090

X 2

Parts

B344035159UK00

All in 1 big box!

Replacement Parts, Call 0844 3300948

Before you throw the package, please use the

Check Box to identify the parts and ensure that

you have all the parts needed for the assembly.

There are inner boxe(s) that include components

required to complete this assembly.

Connector Post

UK921520

X 4

Slat

UK900140

X 48

Spacer

UK300000

X 46

Endcap

UK919500

X 8

Wall Bracket

UK300020

X 2

Bracket

UK300010

X 8

Plug

UK391660

X 96

Ladder

UK900260

X 1

Bolt Hole Plug

UK392850

X 14

Bolt Hole Plugs (S) are only necessary when

you assemble 2 single beds (Step 6 &Step 10).

If you are going to assemble a bunk bed, please

keep them with your Instruction Manual.

B344035159UK00

Step 6

If you are assembling a bunk bed, then

please ignore this step and continue with

Step 7.

if you wish to use this item as 2 single beds,

then to avoid any finger entrapments, please

6.1 Use the BOLTS 3to cover the bolt holes

above the bed foundation.

6.2 Use 4 X (S) to cover the bolt holes under

the bed foundation.

6.3 Use 6 X (S) & 2 X BOLTS 3 to cover the

bolt holes on the (G) & (H) as shown.

6.1

6.2

X 8

6.3

B344035159UK00

Step 7

Please follow the Step 7 - Step 10 to

assemble the second bed:

Attach (D) & (D1) to (I) with BOLTS 3as

shown.

If you intend to use this item as 2 single

beds, then please insert (Y1) to (D) & (D1)

as shown.

If you intend to assemble this item to a bunk

bed, please continue with Step 8 without

inserting (Y1). Please make sure that (Y1)

will be kept with your Instruction Manual for

further use.

X 8

B344035159UK00

Step 8

Attach (J) to (D) & (D1) with BOLTS 4as

shown.

X 8

B344035159UK00

Step 9

Refer to the Step 3 - Step 5 to assemble

(O), (Y), (Q) & (X) to the bed.

X 4

B344035159UK00

Step 10

If you are assembling a bunk bed, then

please ignore this step and continue with

Step 12.

if you wish to use this item as 2 single beds,

then to avoid any finger entrapments, please

use 4 X (S) to cover the bolt holes above the

bed foundation.

Your 2 single beds are now ready to use!

Congratulations!

B344035159UK00

Step 11

To assemble the unit as a bunk bed, you

need to follow the Step 1 - Step 5, Step 7 -

Step 9 without insert (Y1) to the Posts.

If you are transfering 2 beds to a bunk bed,

you have to take out the illustrated 8 X (Y1)

from the Posts before next step.

Please also take out all 14 X (S) from the

beds and keep them with your Instruction

Manual for further use.

B344035159UK00

Step 12

Attach (F) to (A) with BOLTS 3, then fix (F)

to (H) with BOLTS 1.

X 2X 2

B344035159UK00

Step 13

Attach (E) to (A) & (B) with BOLTS 3, then

fix (E) to (G) with BOLTS 1.

X 1X 4

B344035159UK00

Step 14

X 4

Insert (K) to (D) & (D1) then fix them with

BOLTS 3.

B344035159UK00

Step 15

Put the upper bed on the top of (K);

Fix the Posts to (K) with BOLTS 3.

X 4

B344035159UK00

Step 16

Attach (Z) to (H) with BOLTS 2.

X 2

B344035159UK00

Step 17

17.1 Place (W) around (G), inside the fifth

slat from each end. Mark the 4 holes to be

drilled;

17.2 Drill with 6mm (1/4") drill bit to a depth

of 40mm. Plug holes with RAWLPLUGS 6;

17.3 Attach (W) with SCREWS 5.

17.1

17.2

17.3

X 4X 4

Helpful Hints

B344035159UK00

●Move your new furniture carefully, with two

people lifting and carrying the unit to it's new

location.

●Your DHP furniture can be disassembled and

reassembled to move.

●Some parts have been pre-assembled for this

item. They are illustred on this page and available

for replacement.

Helpful Hints

Weight Limits: 200 Lbs / 92 Kgs on upper bed

225 Lbs / 102 Kgs on lower Bed

UK919500

X 8

UK919510

X 4

B344035159UK00

WARNINGS for Bunk Bed

●Periodically check and ensure that the guardrail, ladder, and other components are in their proper position, free from damage, and that all assembly fastenings should always

be tightend properly.

●The bunk bed should not be used if any structural part is broken or missing.

●Always use the recommended size mattresses or mattress supports, or both, to help prevent the likelihood of entrapment or falls.

●Use only a single mattress which is 1900mm long and 900 mm wide on both upper and lower beds.

●The maximum thickness of the mattress used on the upper bed is 160mm. The top of the mattress shall be at least 160mm below the upper edge of the guardrails.

●High beds and the upper bed of bunk beds are not suitable for children under six years due to the risk of injury from falls.

●Children can become trapped between the bed and the wall. To avoid risk of serious injury, the distance between the top safety barrier and the wall shall not exceed 75 mm

nor shall be more than 230mm.

●Strangulation hazard - Never attach or hang items to any part of the bunk bed that are not designed for use with the bed; for example, but not limited to, ropes, strings, cords,

harnesses and belts.