Diamond Multimedia DS3900 User manual

Quick start guide
DS3900
USB 3.0 Dual Display Dock

i
ABOUT THIS MANUAL
This manual provides a beginner's introduction to installing, configuring and using the USB3.0
Gigabit Ethernet Adapter. Information in this document has been carefully checked for accuracy;
however, no guarantee is given to the correctness of the contents. The information in this document
is subject to change without notice. The manufacturer makes no representations or warranties,
either expressed or implied, with respect to the contents hereof and specifically disclaims any
warranties, merchantability, or fitness for any particular purpose.
SAFETY INSTRUCTIONS
Always read the safety instructions carefully:
Keep this User’s Manual for future reference
Keep this equipment away from humidity
If any of the following situation arises, get the equipment checked by a service technician:
•The equipment has been exposed to moisture.
•The equipment has been dropped and damaged.
•The equipment has obvious sign of breakage.
•The equipment has not been working well or you cannot get it to work according to the
User’s Manual.
COPYRIGHT
This document contains proprietary information protected by copyright. All rights are reserved. No
part of this publication or documentation accompanying this product may be reproduced in any form
or by any means or used to make any derivative such as translation, transformation, or adaptation
without permission of the manufacturer.
TRADEMARKS
All trademarks and registered trademarks are the property of their respective owners or companies.

ii
Table of Contents
1. Introduction.......................................................................................................1
Application........................................................................................................................1
Features.............................................................................................................................2
Package Contents..............................................................................................................2
System Requirements........................................................................................................2
Front Panel........................................................................................................................3
Rear Panel .........................................................................................................................4
2. Installation.........................................................................................................5
Driver installation .............................................................................................................5
Hardware installation........................................................................................................6
Verifying the Installation...................................................................................................7
3. Using the USB Display Dock..............................................................................8
Configuring Displays........................................................................................................8
Controlling the Display.....................................................................................................8
4. Uninstalling the Driver....................................................................................13
Uninstalling the Driver....................................................................................................13
5. Specifications..................................................................................................14
6. Regulatory Compliance..................................................................................16
FCC Statement.............................................................................................................................16
CE ................................................................................................................................................16
WEEE Information ......................................................................................................................16

1. Introduction
1
1. Introduction
A USB3.0 Dual Display dock enables multiple USB devices to be connected to
the computer using a single USB3.0 cable . Now with one simple cable connection
to your computer you can have access to large screen displays, stereo speakers,
external hard drive, optical disk drive, printer, USB keyboard and mouse
Just plug in the one USB 3.0 cable from the USB3.0 Dual Display dock to any USB
3.0 or USB 2.0 port on your laptop and your displays and accessories will be
activated in seconds. To undock, simply unplug the one cable and go.
Application

USB 3.0 Display Dock User’s Manual
2
Features
USB Downstream
Compliant to USB 3.0 and USB 2.0
Two USB3.0 down-stream ports supports Super-speed, high-speed and
full-speed traffic
Four USB2.0 down-stream ports support Super-speed, high-speed, full-speed
and low-speed traffic
Ethernet
IEEE 802.3, 802.3u, and 802.3ab compatible
Supports IPv4/IPv6 .
Supports full duplex operation with IEEE 802.3x flow control
Video
Dual digital video outputs
Extended Desktop (Default), Mirrored Desktop, Primary Display
Supports High Resolution up to 2048 x 1152
Audio
2 CH Stereo output & Mic-in with a combo jack
Package Contents
Before installation, please check the items of the package. The package should
contain the following items:
USB 3.0 display dock x1
Power Adapter x1
USB 3.0 Cable x1
Driver CD with User’s Manual x1
Quick Installation Guide x1
DVI toVGA Adapter x1
System Requirements
One available USB port
One of the following operating systems
W
Mac OS 10.6 or higher
indows XP , Windows 7, Windows 8

1. Introduction
3
Front Panel
Power LED:
Glows when the docking station is
powered.
1 USB 3.0 downstr
2 USB 3.0 downstream port: plus quick charge
eam port : Connect
USB peripherals.
3.5 mm stereo audio output port: Connect
to stereo headphones or speakers.
port (BC 1.2) for Apple iPad and iPhones

USB 3.0 Display Dock User’s Manual
4
Rear Panel
4 USB 2.0 downstream ports (A type female
connector): Connect to USB peripherals .
10/100/1000 Mbps Ethernet port:
Connect to
the Ethernet network via a network cable.
DVI video output port: Connect to a DVI
monitor.
USB3.0 upstream port: Connect to the USB3.0
port of the host computer.
Power jack: Connect to the provided power
adapter. The Docking Station always needs external
power supply for operation.
DVI video output port: Connect to a HDMI
monitor.

2. Installation
5
2. Installation
Driver installation
Caution: DO NOT connect the USB display dock to your computer before you install the
provided driver.
Follow the procedures below to install the driver and then connect the USB display dock to
your system :
1. Insert the provided Driver CD into your disc drive. Please locate and double-click
the setup.exe file under x:\Driver\where x is your disc drive letter.
Note：
It will encounter a User Account Control dialog box when attempting to install a
program, please click Yes to start the installation.

USB 3.0 Display Dock User’s Manual
6
2. Please wait while Windows configures DisplayLink Core Software. Your screens
may temporarily go black or flash during this process.
3. When finished,the installation screen will disappear and you will return to your
desktop.
Note：On some machines you may need to reboot before you can use yourDisplay
dock.
Hardware installation
1.
Connect the
Connect the power adapter to the DS1000 and then to a wall socket. Then plug to a USB 3.0
or 2.0 port on the PC.
USB display dock :
Plug the USB3.0 cable into the USB upstream connector on the back of the Display dock.
Then a pop-up message will appear in the notification area indicating the installation is
complete.
* Actual strings depend on your operation system. These screen shots are from Windows 7
and might vary slightly for each operation system.
2.
Connecting Ethernet network device
1. Connect an Ethernet cable to the Ethernet port on the Display dock.
2. Connect the other end of the Ethernet cable to your network hub, switch or router.
3.
Connecting DVI/HDMI Monitor
For DVI port : Use a DVI cable (not provided) to connect the DVI port to a monitor
equipped with DVI input jack.
For HDMI port : Use a HDMI cable (not provided) to connect the HDMI port to a monitor
equipped with HDMI input jack.
4.
5. Connecting USB2.0/USB3.0 Devices

2. Installation
7
Connect your USB devices to the USB ports on the Display dock. As long as one USB
device is connected to the port and the connection works properly, If your USB device,
such as a printer or optical drive, etc., came with its own AC adaptor, make sure that it is
plugged into the device and a working electrical outlet.
6. To connect your speaker/headphones :
insert the plug to the green hole on the front of the Display dock. To connect a
microphone, insert the plug to the pink hole on the front of the Display dock.
Verifying the Installation
Once you finish the installation, you can open WindowsDevice Manager to verify if
your Ethernet Adapter is properly installed. To access the Device Manager:
On Windows 7: Right-click Computer on the desktop and click System
Properties>Device Manager
On Windows XP: Right-click My Computer on the desktop and click Properties
> (Hardware) > Device Manager.
In the USB Display Adapter group, an item named USB3.0 Dual Video Dock should
be displayed.
If there is a question or exclamation mark next to that item, thenthe driver is not
properly installed. Please delete the item, select the Delete the driver software for
this device option (if provided), unplug the adapter from your computer and then repeat
the installation steps.