Digi-Pas DWL9000XY User manual

Digi-Pas®
USER MANUAL
Rev. 1.11
www.digipas.com
2-Axis Ultra Precision Inclinometer
Model: DWL9000XY
Note: Contents in this instruction manual is continuously updated, please check Digi-Pas website for latest version.

Digi-Pas®
© 2021 Digipas Technologies Inc. All Rights Reserved.
www.digipas.com
TOC 1
DWL-9000XY Instruction Manual
1. Device Overview....................................................................................................................... 1
1.1. Technical Specication......................................................................................................1
1.2. Dimension of the Tilt Sensor Module .................................................................................2
1.3. Overview..............................................................................................................................3
1.4. List of items included in DWL-9000XY product package................................................4
2. Setting Up....................................................................................................................................4
2.1. Operation Procedure .........................................................................................................4
2.2. Mounting Device On Fixture or Work Piece.....................................................................4
3. User Interface .............................................................................................................................5
3.1. Single Axis Mode Interface ................................................................................................5
3.2. Single Axis Mode Display Screen and Button Function ..................................................5
3.3. Single Axis Mode Operation ..............................................................................................6
3.4. Dual-Axis Mode Display Screen and Button Function ....................................................6
3.5. Main Menu Icon Screen Display and Button Function ...................................................7
3.6. Main Menu Icon Features ..................................................................................................7
4. Features & Setting ......................................................................................................................8
4.1. Absolute Level Screen Display and Button Function ......................................................8
4.2. Alternate Zero Screen Display and Button Function.......................................................9
4.3. Sync Menu Screen Display and Button Function ..........................................................10
4.4. Angle Meter Screen Display and Button Function........................................................11
4.5. Vibro Meter Screen Display and Button Function .........................................................11
4.6. Setting Menu Display Screen and Button Function.......................................................12
5. Storage & Cleaning ................................................................................................................13
6. Warranty ...................................................................................................................................13
APPENDIX 1: User Calibration .......................................................................................................15
CONTENT

Digi-Pas®
© 2021 Digipas Technologies Inc. All Rights Reserved.
www.digipas.com
TOC 2
DWL-9000XY Instruction Manual

Digi-Pas®
© 2021 Digipas Technologies Inc. All Rights Reserved.
www.digipas.com
DWL-9000XY Instruction Manual
INTELLECTUAL PROPERTY
This manual contains propriety information, which is protected by copyrights. All rights are re-
served. No part of this manual may be photocopied, reproduced, redistributed or translated to
another language without the prior written consent of Digipas Technologies Inc.
The information in this manual was correct at the time of printing, stored in CD or uploaded in the
Company website. However, Digipas Technologies Inc. will continue to improve products and
reserves the rights to change specication and maintenance procedures at any time without prior
notice.
Digi-Pas® Products were manufactured under ISO9001 & ISO14001 standards, tested to comply by
the followings certication bodies:

Digi-Pas®
© 2021 Digipas Technologies Inc. All Rights Reserved.
www.digipas.com
Page 1
DWL-9000XY Instruction Manual
1. DEVICE OVERVIEW
1.1. Technical Specication
Measuring Range
(Single Axis Mode)
0 to 7200 arcsec.
(0.0000° to ± 2.0000°)
Measuring Range
(2-Axis Mode)
0 to 3600 arcsec.
(0.0000° to ± 1.0000°)
Resolution 0.2 arcsec. (≤ 1μm/M)
Accuracy ± 0.6 arcsec at 0 to ±100 arcsec.
± 1.2 arcsec at other angles
Repeatability 0.2 arcsec. (≤ 1μm/M)
Measurement Speed ≤ 25 Sec.
Vibrometer 2.0g
Display Colour TFT LCD
Power Supply 4 x AAA 1.5V Batteries / USB Power source
Material PC ABS / Alloy Steel
Connectivity USB 2.0 Cable (≤ 5 metre)
Bluetooth (≤30 metre)
PC SYNC Software Professional Edition (Included)
Operating Temperature +10°C to +40°C
(Calibrated for the entire temperature range)
Storage Temperature -20°C to +60°C
Dimension (mm) 188 x 62 x 37
Nett Weight (Approx.) 1150 gram
Table 1. Technical specication of DWL-9000XY Ultra Precision Inclinometer
Notes:
-Product performance to specication complies with accredited Calibration & Test Providers in USA, Japan, UK,
and Germany to conform with NIST, JIS, UKAS & DIN under the International Laboratory Accreditation Cooperation
(ILAC) and American Association for Laboratory Accreditation (A2LA). For more information, please visit
“www.digipas.com”.

Digi-Pas®
© 2021 Digipas Technologies Inc. All Rights Reserved.
www.digipas.com
Page 2
DWL-9000XY Instruction Manual
1.2. Dimension of the Tilt Sensor Module
Figure 1. DWL-9000XY Device Dimension
134
12.5
50
15.6
M5 X
7mm X 3 holes
100
188.4
60.5
92
M5 X
16mmx 2 holes
5.3
62.4
36.9
11
36
90°
6
39 29
37
153
62
57 55
30

Digi-Pas®
© 2021 Digipas Technologies Inc. All Rights Reserved.
www.digipas.com
Page 3
DWL-9000XY Instruction Manual
1.3. Overview

Digi-Pas®
© 2021 Digipas Technologies Inc. All Rights Reserved.
www.digipas.com
Page 4
DWL-9000XY Instruction Manual
1.4. List of items included in DWL-9000XY product package
Item No. Description Quantity
1DWL 9000XY Ultra Precision Inclinom-
eter 1 unit
2Certicate of Calibration 1 set
3 AAA batteries 4 pcs
4 USB 2.0 cable (3 Meters) 1 pc
5 Security dongle 1 pc
6 M5 Button head screws 3 pcs
Table 1. Packaging content
2. SETTING UP
2.1. Operation Procedure
1. Insert 4 pieces of “AAA” batteries into the battery compartment and press ON/OFF but-
ton. Alternatively, insert USB power source to the USB Port to power up the device. Take
note that the device performance might be affected when poorly regulated USB power
source is used.
2. Initial Setup screen pops up. Press ON/OFF button to scroll up or MODE button to scroll
down for selecting “Default Units” or “Current Device Location”. Press “UNITS” or “HOLD”
button to input the selected option. Select the nearest option when your location is not
available in the default list. Scroll to select “Done” to continue.
3. Allow sufcient time for the device to stabilize during initial power-up. When the thermom-
eter on the screen turns green, the device is ready to use.
Note: For maximum accuracy, perform calibration (refer to APPENDIX: User Calibration) or Absolute Level
(refer to Chapter 4: Absolute Level for more details) before measurement.
2.2. Mounting Device On Fixture or Work Piece
The two threaded holes are provided for mounting the device onto user-dened xtures/machin-
ery.

Digi-Pas®
© 2021 Digipas Technologies Inc. All Rights Reserved.
www.digipas.com
Page 5
DWL-9000XY Instruction Manual
To mount the device onto user’s dened xture or workpiece. Remove both the set screw (M5),
then replace with the appropriate type of screws specied by the user.
3. USER INTERFACE
3.1. Single Axis Mode Interface
3.2. Single Axis Mode Display Screen and Button Function
3.3. Single Axis Mode Operation
562.2Arcsec
Place the digital level on the surface to be measured.
Please ensure the contact surfaces of the device and measuring plane are clean
and free from dust particles.
562.2Arcsec
BATTERY
LEVEL
MEASUREMENT
UNITS
THERMOMETER
DIGITAL READING
MEASUREMENT
UNITS HOLD
MAIN MENU
OFF

Digi-Pas®
© 2021 Digipas Technologies Inc. All Rights Reserved.
www.digipas.com
Page 6
DWL-9000XY Instruction Manual
The green arrow sign on display indicates the higher side.
User may “freeze” the screen by pressing the HOLD button.
The icon pops up to indicate the screen is paused. To
resume operation, press the hold button once.
Dual-Axis Mode Interface
3.4. Dual-Axis Mode Display Screen and Button Function

Digi-Pas®
© 2021 Digipas Technologies Inc. All Rights Reserved.
www.digipas.com
Page 7
DWL-9000XY Instruction Manual
Place the digital level on the surface to be measured.
Please ensure the contact surfaces of the device and measuring plane are
clean and free from dust particles.
The “Target Ball” or “Bull Eye” move towards the measured position similar
to traditional “Bubble” vials. The green arrow sign on display indicates the
higher side of plane.
Once the measurement stabilizes, the “Target Ball” or “Bull Eye” blinks.
3.5. Main Menu Icon Screen Display and Button Function
3.6. Main Menu Icon Features
ABSOLUTE LEVEL SETTING
Enable user to ensure each measurement reading is in accordance to maximum
device accuracy specied.
ALTERNATE ZERO SETTING
Enable user to measure relative angles at a common plane with respect to a ref-
erence angle. Set any angle to 0” as a reference.

Digi-Pas®
© 2021 Digipas Technologies Inc. All Rights Reserved.
www.digipas.com
Page 8
DWL-9000XY Instruction Manual
SYNC MENU
Enables user to select the connectivity (USB/Bluetooth) with a computer installed
with PC Sync Software.
ANGLE METER
Enables user to obtain real-time continuous angle measurements displayed in line
graph.
VIBRO METER
Enables user to obtain real-time continuous vibration measurements displayed in
line graph.
SETTING MENU
Enable user to modify various parameters of the device.
4. FEATURES AND SETTING
Absolute Level Screen Display and Button Function
Place the device on the surface to be measured. Press MODE button to start
the measurement and wait until the loading bar is full.
Please ensure the contact surfaces of the device and measuring plane are
clean and free from dust particles.
Note: The device is able to auto detect its position is single axis position or
dual-axis.

Digi-Pas®
© 2021 Digipas Technologies Inc. All Rights Reserved.
www.digipas.com
Page 9
DWL-9000XY Instruction Manual
Turn the device 180° and press MODE button again to start the measure-
ment.
When completed the above settings, the ‘ABS’ logo is shown to indicate
that the device is in the Absolute Level mode.
Alternate Zero Screen Display and Button Function
Place the digital level on the surface to be measured. Press MODE button to
set the angle to 0” as a reference.
Please ensure the contact surfaces of the device and measuring plane are
clean and free from dust particles.
Note: The device is able to auto detect its position is single axis position or
2-axis.
The ‘Alt. Zero’ logo is shown to indicate that the device is in Alternate Zero
mode.

Digi-Pas®
© 2021 Digipas Technologies Inc. All Rights Reserved.
www.digipas.com
Page 10
DWL-9000XY Instruction Manual
User may “freeze” the screen by pressing the HOLD button. The icon pops
up to indicate the screen is paused. To resume operation, press the hold
button once.
SYNC Menu Screen Display and Button Function
The status bar indicates current selected mode as USB. To change to Blue-
tooth mode, scroll the ‘right’ button and then press MODE button.
Reboot the device by turning off the device and then turn on the device
again to activate the new setting.
Once Bluetooth mode is activated, the Bluetooth Icon will appear on the
top right display.

Digi-Pas®
© 2021 Digipas Technologies Inc. All Rights Reserved.
www.digipas.com
Page 11
DWL-9000XY Instruction Manual
Angle Meter Screen Display and Button Function
Place the digital level on the surface to be measured.
Please ensure the contact surfaces of the device and measuring plane are clean
and free from dust particles.
The Angle Meter displays real-time continuous angle measurements in line
graph.
User may “freeze” the screen by pressing the HOLD button.
The icon pops up to indicate the screen is paused. To resume operation,
press the hold button once.
Vibro Meter Screen Display and Button Function

Digi-Pas®
© 2021 Digipas Technologies Inc. All Rights Reserved.
www.digipas.com
Page 12
DWL-9000XY Instruction Manual
Place the device on the surface to be measured.
Press Auto Set button to set the line graph to the centre of display.
Please ensure the contact surfaces of the device and measuring plane are clean and free from dust
particles.
When the device detects the vibration, the relative magnitude (g) is shown
on the graph.
To change the scale and speed of the line graph, press the scale selection
button or the speed selection button accordingly.
Setting Menu Display Screen and Button Function
Units To change the measuring unit (arcsec., mm/M, mil(NATO) & mrad).
Current Device Location When the device detects the vibration, the relative magnitude (g)
is shown on the graph.
AutoOff To set automatic power off according to user dened time period.
AutoDim To set automatic dim according to user dened time period.
Buzzer To turn on/off the device buzzer.
Display Brightness To set LCD brightness according to user dened level.

Digi-Pas®
© 2021 Digipas Technologies Inc. All Rights Reserved.
www.digipas.com
Page 13
DWL-9000XY Instruction Manual
5. STORAGE AND CLEANING
Storage
Keep the device in the equipment box and maintain the storage temperature within -20°C to
60°C or -4°F to 140°F.
When the device is not in used, the batteries are to be removed from the device.
Cleaning
1. Keep the device dry and clean. Remove any moisture or dirt with a soft dry cloth before
measurement to obtain the maximum accuracy. Do not use harsh chemicals, strong de-
tergents or cleaning solvent to clean the device.
2. Do not submerge device in liquid while cleaning.
6. WARRANTY
Digi-Pas® 2-Axis Ultra Precision Inclinometer is warranted to the original purchaser to be free from
defects in workmanship and material. Digipas Technologies Inc. will, at its option, repair or replace
any defective part which may malfunction under normal and proper use period of 2 (two) of pur-
chase. The foregoing warranty shall not apply to defects resulting from misuse, abuse, assignment,
or transfer by the Buyer. or interfacing, outside of environment the product. Digipas Technologies
Inc. that the operation of instrument software, or rmware, will be uninterrupted or error-free. The
exclusive remedy under any and all warrants and guarantees expressed herein, and we shall not
be liable for damages from loss or delay of equipment uses, consequential, or incidental dam-
age. No other Warranty is expressed or implied. Digipas Technologies Inc. specically disclaims the
implied warranties of merchantability and tness for a particular purpose.
Limitation of Liability:
In no event shall DIGIPAS TECHNOLOGIES INC., (hereinafter, “the Company”) be liable to you or
any third party for any indirect, special, incidental, exemplary or consequential damages of any
kind resulting from any breach of warranty or from the performance or use of the product. This
includes without limitation: property damage, loss of value of the product or any third party prod-
ucts that are used with the product, or loss of use of the product or any third party products that
are used with the product, even if the Company has been advised of the possibility of such loss or
damages. The Company’s total cumulative liability arising from or related to the product, whether
in contract, tort (including negligence) or otherwise, shall not exceed the amount actually paid
by you for the product. Some states and/or jurisdictions do not allow the exclusion or limitation of
incidental or consequential damages, so the above limitations or exclusions may not apply to you.
If any limitation of liability shall be deemed invalid by any applicable law, then the limitations of
liability set forth above shall apply to the maximum extent permitted under applicable law.

Digi-Pas®
© 2021 Digipas Technologies Inc. All Rights Reserved.
www.digipas.com
Page 14
DWL-9000XY Instruction Manual
Disdtribute by:
Manufactured by:
JSB TECH PTE LTD
Email:[email protected]
www.digipas.com

Digi-Pas®
© 2021 Digipas Technologies Inc. All Rights Reserved.
www.digipas.com
Page 15
DWL-9000XY Instruction Manual
APPENDIX 1: USER CALIBRATION
Calibration Instruments:
Granite Table: Grade AA (Levelled to ≤0.5 arcsec.)
Calibration Procedure:
Ensure the DWL9000XY device is in power OFF condition.
Press and hold the CAL button by using a small pin and
simultaneously press the ON/OFF button.
The LCD screen displays “Calibration 1”.
Place the device to Position 1. Press the MODE button
once and wait until the countdown reach “0”, the LCD
screen displays “Calibration 2”.
Master Square
Granite Table

Digi-Pas®
© 2021 Digipas Technologies Inc. All Rights Reserved.
www.digipas.com
Page 16
DWL-9000XY Instruction Manual
Turn the device 180° to Position 2. Press the MODE button
again to start the calibration at “Position 2” and wait until
the countdown reach “0”, the LCD screen displays “Cali-
bration 3”.
Place the device to Position 3. Press the MODE button
once and wait until the countdown reach “0”, the LCD
screen display “Calibration 4”.
Turn the device 180° to Position 4. Press the MODE button
again and wait until the countdown reach “0”, the LCD
screen will switch to measuring mode once calibration is
completed.
Precaution:
To achieve maximum accuracy, the device must be held rmly on to jig during calibration pro-
cess. Any movement on countdown during each calibration procedure would affect device ac-
curacy.