Digital Watchdog MEGApix DWC-MPTZ20XFM User manual

Before installing or operating the camera, please read and follow this manual carefully.Before installing or operating the camera, please read and follow this manual carefully.
11202013
DWC-MPTZ20X
DWC-MPTZ20XFM [Flush Mount Model]
IP 2.1MP Pan Tilt Zoom Camera

PRECAUTIONS
Do not open or modify.
Do not open the case except during maintenance and installation, for it may be dangerous and can cause
damages.
Do not put objects into the unit.
Keep metal objects and flammable substances from entering the camera. It can cause fire, short-circuits, or
other damages.
Be careful when handling the unit.
To prevent damages, do not drop the camera or subject it to shock or vibration.
Do not install near electric or magnetic fields.
Protect the camera from humidity and dust.
Protect the camera from high temperature.
Be careful when installing near the ceiling of a kitchen or a boiler room, as the temperature may rise to high
levels.
Cleaning: To remove dirt from the case, moisten a soft cloth with a soft detergent solution and wipe.
Mounting Surface: The material of the mounting surface must be strong enough to support the camera.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of
the FCC rules. These limits are designed to provide reasonable protection against harmful interference, when the
equipment is operated in a residential environment. This equipment generates, uses, and radiates radio frequency
energy, and if it is not installed and used in accordance with the instruction manual, it may cause harmful interference
to radio communications.
WARNING: Changes or modifications are not expressly approved by the manufacturer.
FCC COMPLIANCE
2

TABLE OF CONTENTS*
Introduction.......................................................................................................................................................4
Features........................................................................................................................................................4
Parts .........................................................................................................................................................5-7
Dimensions...............................................................................................................................................8-9
Inside the Box ......................................................................................................................................10-11
Installation.......................................................................................................................................................12
Network Connection...................................................................................................................................12
Installation- Mounting MPTZ20X .........................................................................................................13-21
Installation- Cabling .............................................................................................................................17-20
Installation- Mounting MPTZ20XFM ....................................................................................................22-25
MEGAPIX Camera Setup...............................................................................................................................26
Installing the IP Finder...............................................................................................................................26
Using IP Finder Software......................................................................................................................27-28
Network Options.........................................................................................................................................29
Upgrading Cameras using the IP Finder Software....................................................................................30
Camera Reboot..........................................................................................................................................31
MEGAPIX Camera Web Viewer.....................................................................................................................32
Accessing the Web Viewer via Internet Explorer.......................................................................................32
Accessing the Web Viewer via Google Chrome, Mozilla Firefox and Safari............................................33
GUI Description .........................................................................................................................................34
First & Second Stream...............................................................................................................................35
Export Image..............................................................................................................................................36
Print Image.................................................................................................................................................37
Instant Recording..................................................................................................................................38-39
Controlling the Camera using Virtual Joystick .....................................................................................40-41
MEGAPIX Camera Setup...............................................................................................................................42
Video ....................................................................................................................................................42-49
PTZ .......................................................................................................................................................50-58
Event ....................................................................................................................................................59-62
Network.................................................................................................................................................63-68
Record ..................................................................................................................................................69-72
System..................................................................................................................................................73-78
Specifications ...........................................................................................................................................79-80
Troubleshooting .......................................................................................................................................81-84
Warranty..........................................................................................................................................................85
Limits & Exclusions.......................................................................................................................................86
3

ONVIF Compliant
2.1 Megapixels, 30fps at All Resolution
Triple Codec, Simultaneous Multi Stream
1/2.8” CMOS Sensor
4.7~94mm VarifocalAuto Iris Lens
20X Optical Zoom with Auto Focus
12X Digital Zoom
Auto Day and Night with IR Cut Filter
Pan 0~360o Endless, 360o Per Second Pan Speed
Vector Drive Technology (Pan/Tilt Motion in Shortest Path)
255 Preset Positions, 4 Patterns, 8 Swings, 8 Groups
WDR (Wide Dynamic Range)
3D-DNR (3D Digital Noise Reduction)
Two-WayAudio
3 Sensor Inputs, 1 Sensor Output
Motion Detection with Smart Notifications
Micro SD/SDHC Class 10 Card for Emergency Backup
IP66 Certified (Weatherproof) [MPTZ20X Only]
Flush Mount Housing [MPTZ20XFM Only]
Heater and Fan Built-in
PoE (PoE Injector not Included)
AC24V
FEATURES*
4

1. Mounting Bracket (Wall and Ceiling
options available)
2. Housing Safety Wire Hanger
3. Sun Shield + Upper Housing
4. Camera Module
5. Dome Safety Wire
6. Camera Dome
PARTS & DESCRIPTIONS - MPTZ20X*
5

PARTS & DESCRIPTIONS - MPTZ20XFM*
6
1. Cover Dome Hooks
2. Cover Dome Side Connectors
3. Cover Dome
4. Camera Module
5. Camera Hooks
6. In Ceiling Housing
7. Camera Module Hook Guide
8. Mounting Clip Bolt
9. Mounting Clip
10. Housing Safety Wire Hanger
11. Flush Mount Hook
12. Flush Mount
13. Flush Mount Cover Side Connectors
14. Flush Mount Cover

PARTS & DESCRIPTIONS*
7
Camera
Part
Description
1
Alarm In/ Out Connects to peripheral devices according to camera settings
2
Network Cable Port RJ45 Cross over network cable connector
3
Fan Defrosts the dome cover and removes moisture.
4
Heater Defrosts the dome in low temperature by increasing the internal temperature of the
camera housing.
5
Audio Output Port Connection for audio output cables
6
Audio Input Port Connection for audio input cables.
7
Micro SD Card Slot Enter a micro SD card for local emergency backup (not included)
8
Power Port Connect 24VAC power source.

DIMENSIOSN - MPTZ20X*
8

DIMENSIOSN - MPTZ20XFM*
9

The following items are included with the MEGAPIX camera.
1. Housing Safety
2. Water-Proof Tape
3. Hexagonal Wrench
4. Anchor Bolt (4pcs)
5. Hole Template
6. CD (Manual + QSG + IP Finder
Software)
7. Safety Wire
8. Quick Start Guide [QSG]
1. Wall Mount Camera Type
2. Ceiling Mount Camera Type
INSIDE THE BOX –MPTZ20X*
10

INSIDE THE BOX –MPTZ20XFM*
11
1. Dome Cover
2. Camera Module in Flush Mount
Housing
3. 2x Safety Wires
4. Quick Start Guide [QSG]
5. CD (Manual + QSG + IP Finder
Software)

T h e re a r e t w o o p t io ns t o p o w e r t h e M P T Z 20 X c a m era .
U s e a P o E - e n a b l e d s w i t c h t o c o n n e c t d a t a a n d p o w e r t h r o u g h a s i n g l e
c a b l e a n d b e g i n v i e w i n g a n d r e c o r d i n g i m a g e s i n s t a n t l y . A n o n - P o E
s w i t c h w i l l r e q u i r e a n a d a p t o r f o r p o w e r t r a n s m i s s i o n .
1. Using a PoE-Enabled Switch
The MEGAPIX Camera is PoE compliant, allowing transmission of power and data via a
single Ethernet cable connected to a PoE injector. PoE injectors eliminates the need for the
different cables used to power, record, or control the camera. Follow the illustrations below to
connect the camera to a PoE- injector using an Ethernet cable.
2. Using 24VAC
If a PoE injector is not available, use a power adaptor for power transmission and a non-PoE
switch for data transmission. Follow the illustrations below to connect the camera without a
PoE Injector.
24VAC
NETWORK CONNECTION*
12

1. Unscrew the top cover of the Mounting Box.
2. Remove the protective plastic to expose the four (4) screw holes.
3. Using the Mounting Box or the Mounting Template, locate on the wall/ ceiling the locations for
the four (4) bolts.
Note: the Anchor bolts included in with the camera kit are for concrete. Be sure to consult with your
installer what bolts are necessary depending on the wall/ ceiling surface.
4. Using a drill, drill four (4) holes for the bolts. Mount the Mounting box on the wall/ceiling.
Note: If your camera model includes the inner box inside the Mounting Box, make sure the cables
remain intact during installation.
INSTALLATION*
13
[1]
[2]
[3]
[4]

5. Remove the PTZ mechanism from the upper housing to connect all necessary cables.
6. To detach camera mechanism, press down and hold both black handles on the camera
mechanism. Pull them up to detach the camera.
7. Remove the tape used to fix the PTZ mechanism after detaching the PTZ mechanism from the
upper housing. This was used to protect the camera’s lens during shipping and should be
removed before turning the camera’s power on.
INSTALLATION*
14
[5]
[6]
[7]

8. To protect the camera from potential water damage, it is recommended to use the water proof
tape on the pipe of the upper housing.
9. Hook the safety cable between the mounting accessory and the upper housing.
10. Attach the upper housing to the mounting pole by rotating it clockwise until the upper housing
and the mounting accessory are tightly connected.
[10]
INSTALLATION*
15

11. Run all the necessary cables via the mounting accessory’s bracket to the upper housing.
12. Connect each of the following cables to the applicable port. Use the diagram below for
more information.*
a. Alarm In/ Out Port
b. Audio In Port
c. Audio Out Port
d. Network Cable Port
e. Power Port
f. Micro SD Card Slot & Cover
13. Check the LED lights are on. Green light flickers when the camera is booting, and Red
light turns on when booting is complete.
* See next page for proper cabling connections and SD Card installation.
INSTALLATION*
16

INSTALLATION*
17
C a b l i n g
U s e t h e d i a g r a m b e l o w f o r p r o p e r c a b l i n g o f p e r i p h e r a l d e v i c e s s u c h a s
2 n d v i d e o o u t p u t , p o w e r , a n d n e t w o r k .

INSTALLATION*
18
C a b l i n g
U s e t h e d i a g r a m b e l o w f o r p r o p e r c a b l i n g o f p e r i p h e r a l d e v i c e s s u c h a s
2 n d v i d e o o u t p u t , a l a r m s i n p u t s , a n d o u t p u t s .

INSTALLATION*
19
C a b l i n g
U s e t h e d i a g r a m b e l o w f o r p r o p e r c a b l i n g o f p e r i p h e r a l d e v i c e s s u c h a s
a u d i o i n p u t ( m i c r o p h o n e ) a n d a u d i o o u t p u t ( s p e a k e r )

INSTALLATION*
20
S D C a r d
U s e t h e d i a g r a m b e l o w f o r i n s t a l l a t i o n o f a n S D C a r d f o r l o c a l e m e r g e n c y
b a c k u p . W h e n s e t u p p r o p e r l y , t h e c a m e r a w i l l r e c o r d t o t h e l o c a l S D c a r d
w h e n i t d e t e c t s i t i s n o t r e c o r d i n g t o a n y s e r v e r s a n d i s n o t c o n n e c t e d t o
t h e n e t w o r k .