Digitus DS-55100 User manual

HDMI VIDEO EXTENDER
Manual
DS-55100

HDMI Extender by
Single CAT-5e/6 cable 50m 1080p Support 3D
1.0 Introduction
The DS-55100 extends the HDTV display up to 50 meters in Full HD by using
a simple network cable between a transmitter and receiver unit. It supports a
HDMI signal transmission without loss.
2.0 Features
Cat 5 HDMI extender consisting of transmitter and receiver unit
Follow the standard of IEEE-568B
Extension up to 50 meters
Auto-adjustment of feedback, equalization and amplify. The user does not
need to care about the length of the cable
Video resolution up to 1080p
Support 165MHz/1.65Gbps per channel (4.95Gbps all channel) bandwidth
HDCP pass through
Support 8bit per channel (24bit all chancel) color depth
Support uncompressed 2 channel audio such as LPCM
Support 3D video

3.0 Specifications
Signal input HDMI Signal
Input Video Signal 0.5-1.0volts/p-p
Output video HDMI Signal
DTV/HDTV 480i/576i/480P/576P/720P/1080i/1080P
CAT-6 cable 50m for 1080p
Video. Amplifier Bandwidth 2.25Gbps/225MHz
Vertical Frequency Range 50/60Hz
Interlaced
Resolutions(50&60Hz)
480i,576i,1080i
Progressive
Resolutions(50&60Hz)
430p,576p,720p,1080p
Operating Temperature 0℃to 70℃
Operating Humidity 10% to 85% RH (no condensation)
Storage Temperature -10℃to +80℃
Storage Humidity 5% to 90% RH (no condensation)
Power Supply 5V DC
Power consumption(MAX) 5W
Certification CE, FCC
AC Power Adapter EU standard
Note:
I. In order to achieve the high transmission quality, please choose the
shielded CAT-5e or CAT-6 cable.
2. The low quality cables will not achieve the perfect transmission and
full distance.
3. Theoretically, when the function of the product is okay with short
distance transmission, the problem of long distance transmit could
be cause by the quality problems in the transmission cable.

4.0 Package Contents
HDMI Extender, transmitter and receiver unit
2 x Power Supply 5V, 2A
2 sets of mounting brackets with screws
Manual
5.0 Panel Descriptions

6.0 Connection and Operation
1) Plug the fixed HDMI cable of the sender into the HDMI input source.
2) Connect two CAT-5e/6 cables to both the output of the transmitter and
input of the receiver
3) Plug the fixed HDMI cable of the receiver into the HDMI display
(such as: HD-LCD. HD-DLP)
Attention: Insert/Extract cable gently
6.1 Connection Diagram