DIMON TECHNOLOGY Walldim103E1 User manual

Walldim103E1
Walldim103E1
·Suitable for 1-10V LED dimming driver with passive signal support
·Installation in the European and domestic electrical box
·Can switch off the signal and power supply at the same time
·ABS material, high flame retardant
·Fashion, and easy to use
·Used in the study, bedroom, restaurant, bars and other places need dimming control
Product Features
Technical Parameters
Function Description
Wiring Diagram
(1.Turn the knob clockwise , after hear the ‘click’ sound，the knob signal is turned on
,continue to adjust the knob ,the
brightness of light varies from minimum to maximum. Turn the knob by counter-
clockwise, the brightness of light
varies from maximum to minimum ,continue to adjust the knob，after hear the ‘click’
sound, the knob signal is closed.
1/1
User’s manual: 2020-9
Model
Output
Control output load capacity
Switching output load capacity
Type
Panel color
Panel size
Packing size
Max. 6 A resistive load
Passive dimmer
Ivory-white
86*86*42mm(W*H*D)
104*104*52mm(W*H*D)
140g
-10~55℃
20-90% RH
G.W.
Working temp.
Relative humidity
Walldim103E1
Variable resistance signal
Max. 20 mA
Installation Guide
Dimension(mm)
1. Mount an electrical box inside the wall
2. To separate the panel and the back
cover of the controller with a screwdriver
along the gap of the back cover.

Walldim103E1
Caution
1. Connect the load wire at first, then connect the power wire; Please ensure short circuit can not occur between wires before you turn on the power.
2. Please check the input voltage and frequency range, it may burn out the dimmer once exceed the voltage or frequency range.
2/2
User’s manual: 2020-9
3. Connect the wires according to the
“Wiring Diagram”
4. To put the back cover on the electrical box and fix it with the screw.
5.To buckle the glass panel to the bottom box.