DIR Apollo II User manual

8716-2G
Apollo II
INSTRUCTION MANUAL
®

Net Weight
USA
DC 24
AC 110V/6
396
160 lbs
lbs
0HZ
V
Max Load Capicity
Input Voltage
Output Voltage
UK
AC 230V/5
73.5kg
180 kg
0HZ
DC24V

Headrest Locking Knob
Armrest Installation
Armrest Installation

Introduction for control panel
Press button ① to power ON the bed and be able to use all
controls. Press ① again to power OFF the bed and the bed
will return to its original state.
Press button ② to adjust the whole bed up and down.
Press button ③ to adjust the backrest up and down.
Press button ④ to adjust the incline angle for the seat.
Press button ⑤ to adjust the footrest up and down
Press button ⑥-⑧ for your pre-set preferred height & chair
position, you can preset up to 3 different pre-set positions
Press button ⑨ to turn off the heating function.
Press button ⑩ to turn on the heating function.

Please make sure the unit is turned ON before operating all adjustments.

Height Adjustment

Backrest Adjustment

Seat Adjustment

Leg Rest Adjustment

Headrest Angle Adjustment
Headrest Locking Knob

Foot Extension
Adjustment

Maintenance & Care
1. Use damp towel to wipe and clean surface.
2. Simple soap and water can be used to wash surface.
3. Avoid using abrasive cleaning agents.
Brush away excess hair
Clean surface with damp cloth or
use simple soap & water solution.
Avoid using corrosive clean-
ing agents such as bleaches.
Do not remove upholstery
for cleaning
Product care

Technical Troubleshooting Guide
Problem
Possible Cause
1.Thefunction of con trol button
has reached to maximum.
2.To check if the power plug is
connected.
3.To check if each connecti ng
plug of the transformer is
connected.
Solution
Warranty
1.Try to press other control
The warranty period is one year. DIR warrants to you, the original buyer, that goods shall be free of defects in material and/or
workmanship for one year from date of delivery.Damage resulting from improper handling after merchandise is received,
or from exposure to weather or extreme atmospheric conditions is not covered by the warranty.
For any other information please contact our support team:
66 Rea Street South
Birmingham
B5 6LB
UK
-----------------------------
Tel:
[phone]
-----------------------------
Email:
[e-mail]
DIR BIRMINGHAM
Unit 1 River Road
Business Park
33 River Road, Barking
Greater London
IG11 0DA
UK
-----------------------------
Tel:
[phone]
--------- --------------------
Email:
DIR LONDON
USA
Tel:
sale
DIR NEW YORK
575 Underhill Blvd.
Suite 170
Syosset, NY 11791
----------------- ----------
[phone]
[phone]
-------- ---------------------
Email:
s@dirsalonfurnit
ure.c
om
[email protected]
button.
2.Disconnect the power plug and
connect it again.
3.Disconnect and reconnect all
ports to the transformer.
*Unresponsive button controls
*Beeping sounds