Directed Pixbee lullabi User manual

USER MANUAL
lullabi
Smart Sleep Trainer
with Night Light and White Noise
PXB-100L

3

4
CONTENTS
1.0 IMPORTANT SAFETY PRECAUTIONS................ 6
2.0 PRODUCT OVERVIEW ....................................... 7
3.0 OPERATING INSTRUCTIONS............................. 8
3.1 LCD screen............................................8
3.2 Snooze button.......................................8
3.3 Mode button (1) ....................................8
3.4 Mode button (2) ....................................9
3.5 Speaker .................................................9
3.6 USB Type-C port (power supply) ...........9
4.0 CHILD LOCK FUNCTION.................................. 10
5.0 TIME SETTING ................................................... 11
6.0 ALARM CLOCK SETTING..................................12
7.0 PIXBEE SMART LIFE APP ..................................13
8.0 LIGHTING ADJUSTMENTS................................15
9.0 THEME SELECTION ...........................................17
10.0 ALARM CLOCK SELECTION .............................19
11.0 APPLICATION SETTINGS..................................21
12.0 VOICE COMMANDS......................................... 23

5
13.0 TROUBLESHOOTING .......................................24
14.0 SPECIFICATIONS ............................................. 24
15.0 IN THE BOX....................................................... 25
16.0 WARRANTY TERMS AND CONDITIONS ......... 25

6
1.0 IMPORTANT SAFETY PRECAUTIONS
Please read these instructions carefully before
installing and using the product. Please retain
these instructions for future reference.
1. Use only the supplied USB Type-C cable and
AC power adaptor.
2. The LED light cannot be replaced. Please
do not dismantle or modify the device by
yourself as it will void the warranty.
3. Do not place or operate the product near
extreme heat sources, damp surroundings or
corrosive materials.
4. Do not operate the product with a damaged
power cord, after a malfunction has occurred
or if the product is damaged in any manner.
5. This product is not waterproof or designed
for rugged use.
6. Use only a dry cloth to clean and remove
dust.
7. Please follow local regulations when
disposing of or recycling this product and its
components.
8. If this product is not in use for prolonged
periods, please disconnect the power supply
and store it in a clean and dry place.

7
2.0 PRODUCT OVERVIEW
5
6
3 4
1
2
1. LCD screen
2. Snooze button
3. Mode button (1) for temperature, time, alarm
clock and child lock
4. Mode button (2) for time, time format, alarm
clock, child lock and Wi-Fi network pairing
5. Speaker
6. Type-C USB port

8
3.0 OPERATING INSTRUCTIONS
3.1 LCD SCREEN
• The screen will display various working
parameters such as temperature, time, child
lock, Wi-Fi, alarm clock, time format and
other information.
• Wake-Up mode: The time range is from 06:00
to 17:59. The sun, butterfly and sunflower
icons will flash 3 times every 5 minutes
(except for snooze mode).
• Sleep mode: The time range is from 18:00
to 05.59. All the 12 icons will flash 3 times in
sequence every 30 minutes.
3.2 SNOOZE BUTTON
• When the alarm sounds, short press the
Snooze button
Z
Z
to stop the alarm. Long
press for 3 seconds to adjust the brightness
from 1% to 100%.
• When entering snooze mode, the alarm
will sound every 10 minutes. The 12 icons
will continue to flash during snooze mode.
When the alarm sounds, you can continue to
operate other functions or turn off the alarm.
3.3 MODE BUTTON (1)
Used in combination with Mode button (2)
Temperature, time, alarm clock and child lock
• Short press the button to switch between
Celsius and Fahrenheit.

9
• Long press for 3 seconds to choose
time setting, alarm clock and selection
confirmation. Short press to exit setting.
• Temperature variation is ±3º. This is normal.
3.4 MODE BUTTON (2)
Used in combination with Mode button (1)
Time, time format, alarm clock, child lock and
Wi-Fi network pairing
• Short press the button to switch between
12-hr and 24-hr format.
• Long press for 3 seconds to enter into Wi-Fi
network pairing mode. When entering time
or alarm clock setting, short press to switch
options or adjust parameters.
• The default time format is 12-hr and AM and
PM will be displayed. AM and PM will not be
displayed for the 24-hr format.
• This device will enter into Wi-Fi network
pairing mode once it is powered on.
3.5 SPEAKER
• All sounds will be emitted from the speaker.
3.6 USB TYPE-C PORT (POWER SUPPLY)
• This product uses a USB Type-C power input
with an output voltage of DC5V/1A.
• It is recommended to use the original power
adaptor to avoid any hazards.

10
4.0 CHILD LOCK FUNCTION
The child lock prevents children from tampering
with the device settings.
• Press the and at the same time and
hold for 3 seconds to access the child lock
function.
• To exit the function, press the two buttons at
the same time and hold for 3 seconds.
• When child lock is activated, the child lock
icon will appear on the LCD display.
• Child lock function is also available in the
Pixbee Smart Life app.

11
5.0 TIME SETTING
Time can be easily set by turning on the "Auto
Network Time" option in the Pixbee Smart Life
app.
When the device is connected to Wi-Fi, it will
automatically set the local time and temperature.
Mode buttons 1 and 2 are only used to set the
time when there is no internet connection, and
the temperature is not displayed.
When the device is connected to the internet,
the Mode buttons cannot be used to set the
time, they can only be used to set the alarm
clock.
1. Long press Mode Button (1) for 3 seconds
to enter into setting mode. The LCD display
will show AM/PM/24h and start to flash.
2. Short press Mode Button (1) to begin
to set the time. The hour digit on the LCD
screen will start to flash.
3. Short press Mode Button (2) to set the hour
digit. Then short press Mode Button (1) to
confirm the hour digit. At the same time, the
minute digit will start to flash.
4. Short press Mode Button (2) to set the
minute digit. Then short press Mode Button
(1) to confirm the minute digit and exit the
time setting mode.

12
6.0 ALARM CLOCK SETTING
It is recommended to set up alarms in the Pixbee
Smart Life app. However, Mode button (1) and
(2) can also be used to set the alarm manually.
1. Long press Mode Button (1) for 3 seconds
to enter into setting mode. The LCD display
will show AM/PM/24h and start to flash.
2. Short press Mode Button (2) and the alarm
clock icon will start to flash. Short press Mode
Button (1) to set the alarm clock time. The
hour digit will start to flash.
3. Short press Mode Button (2) to set the hour
digit. Then short press Mode Button (1) to
confirm the hour digit and the minute digit
will start to flash.
4. Short press Mode Button (2) to set the
minute digit. The short press Mode Button
(1) to confirm the minute digit and exit the
alarm clock setting mode.

13
7.0 PIXBEE SMART LIFE APP
The Pixbee Smart Sleep Trainer can be operated
using the Pixbee Smart Life app. Ensure that the
device is connected to a secured 2.4GHz Wi-Fi
network.
STEP 1
Search and download the Pixbee Smart Life app
from the Apple App or Google Play store. Install
the app.
Scan the QR code below to download the
"Pixbee Smart Life" App, or visit the Apple App
Store or Google Play Store to search for and
download the App.
STEP 2
Open the Pixbee Smart Life app and create a
new account to register on first use or login to
your existing account.

14
STEP 3
Make sure that the device is powered on and
that the Wi-Fi status on the LCD screen is
flashing quickly. Next, turn on the Bluetooth on
your smart device (smartphone or tablet).
STEP 4
Click on ‘Add Device’ and search for the Smart
Sleep Trainer/Light. Next, follow the prompts to
add the product.
STEP 5
Select the 2.4GHz Wi-Fi, input the password and
click OK to complete the Wi-Fi pairing.

15
8.0 LIGHTING ADJUSTMENTS
1. PRODUCT SETTINGS
Click on this to edit the product name, product
settings such as creating product group and
Tap-to-Run Automation.
1
2
6
5
3
4
7

16
2. LCD BACKLIGHT ON/OFF
Use this to turn on or off the backlight of the
LCD display. This button cannot be used to turn
off sounds.
3. LCD BRIGHTNESS ADJUSTMENT
Slide up and down to adjust the brightness of
the LCD display from 1% to 100%. Adjust within
the inner circle.
4. LCD COLOUR ADJUSTMENT
Select the LCD display colour by touching the
desired colour variations within the outer circle.
5. SOUND EFFECTS SELECTION
Swipe up to choose the different sound effects.
Choose from 16 sound effects.
6. VOLUME ADJUSTMENT
Slide the Volume bar to set the desired volume.
7. PLAY/PAUSE
Short press to switch between Play and Pause
functions. For first use, select the sound effect
and then click on the Play button.

17
9.0 THEME SELECTION
THEME EDIT
There are two modes, Theme and My Favourite.
The theme mode is a preset mode and cannot
be edited.

18
RECOMMENDED THEME
There are 10 recommended modes to choose
from: Wake Up, Sleep Aid, Breath, Warm Yellow,
Colourful, Play, Reading, Night, Meditation,
Holiday.
MY FAVOURITE
In this mode, you can add your own theme with
custom light colour, brightness, sound effects
and volume. Up to 8 custom themes can be
added.

19
10.0 ALARM CLOCK SELECTION
ALARM SETTING
Choose to add sleep or wake-up alarm.

20
SLEEP ALARM
Up to 4 sets of alarms can be added. The alarm
can be edited for time, repeat day, note, light
colour, brightness, on/off sound effect, type of
sound effects, volume and duration. Swipe to
the left and click on delete button to delete the
alarm setting.
WAKE-UP ALARM
Up to 4 sets of alarms can be added. The alarm
can be edited for time, repeat day, note, light
colour, brightness, on/off sound effect, type of
sound effects, volume and duration. Swipe to
the left and click on delete button to delete the
alarm setting.