Sunnydaze Decor AGR-409 User manual

CR901
CONSOLE TABLE WITH DRAWER
AGR-409
Carefully review assembly and care instructions before using this product. Save this document for future reference.

Thank you for choosing Sunnydaze Decor. We stand behind our brand and the quality of the items we sell.
Replacement parts or products will be sent at our discretion within the 1-year warranty period. Proof of purchase, with
the date of purchase as well as photos of the merchandise defect, must be provided. Photos are used to determine
the cause of defects and for future quality control. Register your warranty at https://tiny.cc/SunnydazeWarranty
If you have any questions, comments or concerns, feel free to contact us by phone at 833-982-1977, by email:
[e-mail], or via our contact us page at https://tiny.cc/SunnydazeContact
Purchase Date: / / Order/Customer Reference Number:
08/2022
HELPFUL HINTS
Sunnydaze Decor advises reviewing this manual fully, and assembling the unit soon after purchase.
Check that all parts are accounted for and familiarize yourself with the assembly before beginning.

2-PERSON
ASSEMBLY
RECOMMENDED
Page 1 / 8

INTRODUCTION
Instrucciones
Instructions


Read the manual carefully to ensure you fully understand
all use, care, assembly, and safety information.
Read this manual carefully and
follow the assembly instructions
in the order listed. Pay close
attention to assembly drawings.
Regularly clean with a clean
microber cloth to prevent dust
accumulation.
Do not paint the unit.
Do not use abrasive materials or
cleaners to clean the furniture.
Indoor use only.
Do not expose the furniture to
heat or humidity.
When cleaning nearby the
furniture, do not allow contact
with water or cleaners as it may
deteriorate the furniture.
Do not allow metal components
to come in contact with water or
cleaners as it may cause rust and
staining.
Assemble on a soft, at, clean, and
dry surface.
Use a soft, protective barrier when
assembling the furniture.
TIP: Use the box carton as a
protective layer to separate and
protect the parts from scratches and
other damage during assembly.
Do not push or drag furniture as
doing so may damage the unit.
Only move furniture when it is empty.
Always ask for help when moving
furniture.
Avoid Accidents - Do not climb, sit
or stand on the furniture.
Do not allow children to play on or
inside the furniture.
Keep sharp objects away as they
may scratch or damage the unit.
Do not use the furniture as a writing
surface without a padded barrier.
CR901 08/2022
NOTICE:
Manufacturer and seller expressly disclaim any and all liability from personal injury, property damage
or loss, whether direct or indirect, or incidental, resulting from the incorrect attachment, improper use,

Page 2 / 8

  
01 Tabletop 1
02 Side Panel (L/R) 2
03 Leg 4
04 Back Panel 1
05 Front Panel 1
06 Drawer Rail 2
07 Drawer Side (L/R) 2
08 Drawer Face 1
09 Drawer Back 1
10 Drawer Base 1
  
AWood Dowel 28
BM4.5x28mm Pan Screw 20
CM3.5x30mm Flat Screw 8
DM4.5x25mm Pan Screw 10
EHandle Set 1
FTack 4
GConnector 10
HDrawer Slide 2
JM4x8mm Bolt 2
KM3.5x14mm Flat Screw 6
YWall Anchor Kit 1
COMPONENTS
(not included)
Phillips Screwdriver
Rubber Mallet
Power Drill,
6mm Drill Bit,
2mm Drill Bit
CR901 08/2022
Inspect packaging to ensure all
parts are accounted for before
disposing of packing materials.
CHOKING HAZARD — This item contains small parts that can be
swallowed. Keep children and pets away during assembly.
WARNING
Page 3 / 8
2-PERSON
ASSEMBLY
RECOMMENDED

IMPORTANT: Take care not to over-tighten screws as doing so may crack the wood or strip the screw hole, causing a weak connection and reduced stability.
CR901 08/2022
ASSEMBLY
Carefully review all steps and fully understand assembly before beginning.
STEP 1
02: 2
04: 1
05: 1
06: 2
A: 28
G: 10
STEP 2
03: 4
B: 8
IMPORTANT:
Ensure the side panels and
legs are tight against each other
before installing the screws.
Assistance is recommended for this step.
Page 4 / 8
TIP: Install wood dowels and connectors by gently tapping
them into the designated holes using a rubber mallet.

CR901 08/2022
B
STEP 3
B: 4
STEP 4
B: 8
IMPORTANT:
Ensure Drawer Rails (06) are
installed in the correct direction,
as shown in this diagram.
Assistance is recommended for this step.
Page 5 / 8
IMPORTANT:
Ensure the components are
tight against each other before
installing the screws.

CR901 08/2022
STEP 5
01: 1
D: 10
STEP 6
07: 2
08: 1
09: 1
10: 1
C: 8
E: 1
Page 6 / 8

CR901 08/2022
STEP 7
H: 2
K: 6
STEP 8
F: 4
J: 2
Page 7 / 8

NOTICE:
Manufacturer and seller expressly disclaim any and all liability from personal injury, property damage
or loss, whether direct or indirect, or incidental, resulting from the incorrect attachment, improper use,

CR901 08/2022 Page 8 / 8
M3.5x14mm
M3.5x25mm
Wall
Top
STEP 9
Y: 1
IMPORTANT: If walls are not solid like brick, stone or concrete, you will require special ttings (not included). When
in doubt, consult a professional.
Carefully measure the location of pilot hole before drilling and installing the unit.
WARNING: Check for pipes and electrical wiring before drilling.
• Place wall mounting strap against the wall and mark the position for drilling the hole.
• Using a power drill with a 6mm bit, drill a hole to 30mm depth. If the wall is softer, using a 5mm bit is recommended.
• Insert the wall anchor into the hole until the opening is flush with the wall.
• Secure the strap to the wall using the 25mm screw and washer.
• Use a 2mm drill bit to pre-drill a small pilot hole on the back of the furniture top. Secure the other end of the strap to
the furniture using the 14mm screw and washer.

SAFETY STATEMENTS & WARNINGS
• Residential use only. Not for commercial or industrial use.
• For indoor use only.
• Ensure fittings are tight before use. Periodically check fitting to ensure they are tight.
• Only use this unit on a flat, level surface.
• Do not sit, stand or climb on the unit.
• Supervise children; never allow children to climb or sit on this unit as it may tip over and cause serious injury.
• Do not place liquids or hot items directly on the furniture.
• Never use chemical cleaning products or polishes as they may damage the finish.
• Do not exceed the weight capacity of the furniture.
• Do not overload the drawers as doing so may cause damage.
• Do not place the unit in direct sunlight.
• Avoid placing unit near heating or cooling vents as forced air is very drying and can damage the unit.
• Do not write on furniture without a padded barrier to protect the surface.
If you experience issues with assembly or the product was damaged during shipping,
please contact our customer service team directly through one of the methods mentioned at the top of page 1.
Please have the item number and order information ready to expedite response time.