Dish Network WALLY User manual

Unplug the power cord from the wall. Then disconnect the cables
from the receiver you’re returning. Leave the remaining cables
connected to the wall/TV.
Attach the cables to your new receiver and plug the new power
cord into the wall.
Follow the onscreen setup instructions. Make sure that your TV is
on and set to the proper input.
1
2
3
Tray Receiver Bubble Bag
Set Up Your New Receiver & Watch TV Today!
(Para descargar esta guia en español, visite mydish.com.)
Old Receiver
New Receiver
Power Supply

Package the old receiver by placing it in the provided bubble bag,
and then placing it in the box. Place the cardboard tray over the
receiver for added protection and then the old power supply on top.
Close the box by folding the flaps toward the center. Seal the box
using clear packaging tape.
Flip and reattach the shipping label on the side of the box. Take
the box to a UPS dropo location. Go to ups.com/dropo to find a
location near you.
4
5
6
DN014281