How to Enable headset mode?
1) Find Menu then navigate as follows:Menu->Settings->Basic Setting->Headset:
2) Enable the Headset priority
3) Choose the "User HeadSet" or "Both" from "ringer Device for headset" option
4) Press the save button to save the configuration?
5) Press the headset key on phone's during the idle status when you accomplish the above-mentioned configuration. Headset icon will display on phone
status bar
How to activate Bluetooth via phone interface?
1) Find Menu then navigate as follows:
Menu Settings Basic Setting Bluetooth
2) Press the save button to save the configuration.
3) You will see the Bluetooth icon on phone's homepage status bar during the idle status.
(This icon means that phone has no pair the Bluetooth device.)
How to activate Bluetooth feature via web interface?
1) Login the phone's webpage Setting Feature Bluetooth
How to open the Bluetooth pairing mode on Bluetooth headset?
1) Turn on the Bluetooth headset.
2) Long press the multifunction key on the Bluetooth headset until the indicator LED alternately flashes red and blue.
The Bluetooth headset is in pairing mode.
How to scan the Bluetooth headset device on phone interface?
1) Press the Scan button on phone interface.
2) The phone will enter the scan interface.
The phone starts searching for Bluetooth headsets within the working range of 32 feet.
3) There will displays all detected Bluetooth headsets on the phone.
4) Choose the desired Bluetooth Device from the list and connect to it.
5) If the Bluetooth Device connected/paired successfully, you will see the "Connect Success!"
and connected successfully icon.
6) When you back to idle interface, you will see the connected successfully icon.
Note: If the Bluetooth headset has a PIN, you need to configure the PIN via web interface: Default PIN is 0000.
1) Login the phone's webpage->Setting->FeatureBluetooth
How to edit device information on phone interface?
1) Find Menu then navigate as follows:
MenuSettingsBasic SettingBluetooth: Edit Device Information
2) Press the enter button, you can edit the Device Name.
How to adjust the earphone volume during a call?
With the Bluetooth headset paired, you can do the following:
Press the Volume key ( + ) on the Bluetooth headset to increase the volume.
Press the Volume key ( - ) on the Bluetooth headset to decrease the volume.
How to End Calls?
With the Bluetooth headset paired, press the multifunction key on the Bluetooth headset to end a call.
Troubleshooting
