Dixie Chopper Eco-Eagle Xcaliber User manual

Model # ____________________
Serial # ____________________
Date Purchased ____________________
Engine Serial # ____________________
Engine Model # ____________________
Engine Spec. # ____________________
Alternative Xcaliber CNG Owner’s Manual
February, 2010700161

Dixie Chopper • 6302 E. County Road 100 N. • Coatesville, IN • 46121 • www.dixiechopper.com
AUTHORIZED DEALER
About This Manual
This owner’s manual is considered a permanent part of the mower. It must be available to all of the
operators and/or person(s) servicing the mower. Should the mower be resold, this manual must remain
with the mower.
All information, illustrations, and specications contained in this manual were in effect at the time of
publication. Dixie Chopper reserves the right to change, modify, and/or discontinue specications and/
or design without notice. If there is a change that has been made to your mower which is not shown
or reected in this manual, please see your authorized Dixie Chopper Mower dealer before operating
and/or servicing the equipment.
Congratulations on the purchase of your new Dixie Chopper mower. We at Dixie Chopper are con-
dent that this mower will provide you with years of excellent performance, durability, and trouble free
service when operated and maintained as directed in this manual.
Should you ever have any questions regarding the operation, maintenance, or safety of your mower,
please contact your authorized Dixie Chopper Mower dealer who has been specially trained on opera-
tion and service of Dixie Chopper Mowers.
A space has been provided on the cover and below to record information about your new Dixie Chopper
Mower. Please take time to record such information for future reference, especially when you contact
an authorized Dixie Chopper Mower dealer with questions.
Date Purchased: ___________________________________________
Model Number: ___________________________________________
Serial Number: ___________________________________________
Purchased From: ___________________________________________

Dixie Chopper • 6302 E. County Road 100 N. • Coatesville, IN • 46121 • www.dixiechopper.com
TABLE OF CONTENTS
Warranty Policies 1
Optional Extended Warranty Programs 2
Safety Information 3
General Safety Precautions 7
Safety Information Decals 9
Specications 10
Mower Controls 13
Operating the Mower 14
Refueling the Mower 18
Basic Mower Adjustments, Maintenance, and Repairs 19
Fluid Recommendations 23
Belt Route and Common Parts 24
Routine Maintenance 25
Lubrication Points 27
Troubleshooting 28
Notes 31

1
Dixie Chopper • 6302 E. County Road 100 N. • Coatesville, IN • 46121 • www.dixiechopper.com
Warranty Policies
There are no understandings, agreements, representations, or warranties expressed or implied (including but not lim-
ited to any regarding the merchantability or tness for a particular purpose), not specied herein, regarding the equip-
ment which is the subject of this warranty.
Owner/Operator Knowledge Responsibility
As a condition of the Dixie Chopper warranty, the owner and operator(s) are fully responsible for having read, and
reasonably understood the proper operation and care of the Dixie Chopper Mower before attempting to operate the
mower.
Through the terms and conditions contained herein, Magic Circle Corporation and Dixie Chopper warrants that it will
adjust, repair, or replace any factory original part used in the manufacturing of a Dixie Chopper complete unit, found to
be defective in material or workmanship.
Complete Unit
The warranty period is limited to two years from the date of retail purchase on behalf of the original owner of a Dixie
Chopper Mower. This warranty will provide the cost of repair or replacement ( at the discretion of Dixie Chopper) of
the defective part, including labor. This warranty applies in like form to the original retail purchaser of a Dixie Chopper
Mower used commercially, or for income producing purposes. Additionally, Dixie Chopper will provide to the original
purchaser beyond the initial 2 year warranty as stated above, replacement of any main frame, front fork and castor
bearings, steering levers and linkages due to breakage, or any stainless steel body due to rust, for the useful life period
of the machine. This additional “lifetime warranty” covers stated parts only...no labor.
Deck Spindle Assembly
Parts and labor for the replacement of the complete deck spindle assembly (deck hub, deck spindle bearings, deck hub
spacer, and blade spindle shaft), of the Dixie Chopper Mower will be warranted for three years from the retail purchase
date on behalf of the original owner against defects in materials or workmanship.
Hydro-Drive-Train
Hydro-drive components (pumps, wheel motors, and T-box), of the Dixie Chopper Mower will warranted for two years
from the retail purchase date on behalf of the original owner against defects in materials or workmanship.
Generac Engine
The Generac engine used on the Dixie Chopper Mower is warranted for period of three years from the retail purchase
date on behalf of the original owner against defects in materials or workmanship. Labor required for engine warranty
will be covered by Dixie Chopper for the rst two years and at the unit owners expense during the third year.
Tires, Blades, and Belts
Tires, blades, clutch shoes, and belts are considered to be consumable wear items, and are therefore warranted for an
initial period of 90 days against materials or workmanship defects, not for wear or abuse.
Replacement Parts (Customer proof of purchase required)
Dixie Chopper replacement parts are warranted for 90 days against defects in materials & workmanship. (Hydro
pumps and motors must be dealer installed). Coverage is for parts replacement only...no labor, and does not pertain to
improper installation or abuse.
Battery Warranty
Dixie Chopper original equipment batteries are warranted against OEM factory defects in materials or workmanship
(“discharged only and abuse” are not covered). If battery failure occurs within six months of mowers original retail pur-
chase date, purchase of battery will be reimbursed ($30-$50 depending on model). Battery failures occurring beyond
six months but less than one year from original retail purchase date will be reimbursed at 50% of the cost of the stan-
dard replacement battery.
Transportation for Warranty Repairs
A Dixie Chopper Mower (including any defective part(s) requiring warranty repair, must be returned to an authorized
Dixie Chopper Service Dealer within the warranty period. The expense of transporting the unit to and from the dealer
for warranty work will be the responsibility of the mower owner.
Limitation of Warranty
The Product Registration/Dealer Delivery Certication must be mailed to Dixie Chopper within three days of the original
retail purchase date to enable accurate validation of the warranty period provided. Proof of purchase may be required
( invoice & copy of product registration) from the unit owner to substantiate any warranty claim.. All warranty work must
be performed by an authorized Dixie Chopper Servicing Dealer, using only Dixie Chopper OEM parts.
This warranty covers only Dixie Chopper Mower complete units that are registered with the factory when purchased
new, properly maintained, and operated under conditions considered normal for commercial turf equipment.

2
Dixie Chopper • 6302 E. County Road 100 N. • Coatesville, IN • 46121 • www.dixiechopper.com
Optional Extended Warranty Programs
5 Year Extended Generac-Engine Warranty ($895) (5 Year
Coverage from Purchase Date) This is an extension of the original three year warranty
issued by Dixie Chopper and is subject to the same limitations. Please see Guardian Generac
Engine owner’s manual for details of the original warranty. This warranty will be administered by
the Dixie Chopper Service/Warranty Department (800-307-2667). Dixie Chopper will, at its
discretion, pay for (parts only), the replacement of the engine, or any of its components that fail due to
defects in material or workmanship, for a period of ve years from the original date of purchase.
Five Year Extended Deck Spindle Asm. Warranty($199)* (5-Years Coverage from Purchase
Date) This ve year extended warranty covering the complete deck spindle assembly (deck hub,
deck spindle bearings, deck hub spacer, and blade-spindle shaft), of the Dixie Chopper complete unit
will be warranted for ve years from the retail purchase date on behalf of the original owner against
defects in materials or workmanship. The 4th and 5th year are parts only, no labor.
Dixie Chopper will replace all or part of the assembly at its discretion.
Purchase all three Extended Warranties at time of original retail purchase for
$1495
Purchase Hydro and Spindle Warranties at time of original retail purchase for
$798
Five-Year Extended Hydro-Drive-Train Warranty ($599)* (5-Years Coverage from Purchase Date)
Dixie Chopper offers a three-year extended parts warranty covering hydro-drive-train components.
Purchasing the three-year extended parts warranty provides to the original purchaser from date of
purchase...
2 years Parts & Labor, plus an additional 3-years Parts Only warranty coverage. This means
for 5 years, if hydro-drive-train components (wheel motors, pumps & pulleys, T box & pulley,
hydro hoses, ttings, gaskets, drive linkages, bushings, wheel hubs, or wheel rims), as part
of the machine, require replacement due to a defect in materials or workmanship, Dixie Choper
will cover the cost of needed replacement part(s) is included. During the rst 2 years of warra-
nty coverage, labor for the necessary replacement of the part(s) is included. During years
3 through 5, labor for the necessary replacement of the part(s) will be the responsibility of the
machine owner.

3
Dixie Chopper • 6302 E. County Road 100 N. • Coatesville, IN • 46121 • www.dixiechopper.com
Read the Manual
The operator’s manual contains important safety information
you need to be aware of BEFORE you operate your unit as
well as DURING operation.
Safe operating techniques, an explanation of the product’s
features and controls, and maintenance information is
included to help you get the most out of your equipment
investment.
Be sure to completely read the General Safety Precaution
section, found in this manual. Also completely read the Start
Up and Operating section.
Children
Tragic accidents can occur with children. Do not allow them
anywhere near the area of operation. Children are often
attracted to the unit and mowing activity. Never assume that
children will remain where you last saw them. If there is a
risk that children may enter the area where you are mowing,
have another responsible adult watch them.
Slope Operation
Operation on slopes can be dangerous. Using the unit on a
slope that is too steep where you do not have adequate wheel
traction (and control) can cause sliding, loss of
steering, control, and possible rollover. You should not
operate on a slope greater than a 5.4 foot rise over a 20 foot
length (15 degrees).
Always mow across slopes, not up and down (to maintain
traction on the wheels) and avoid sudden turns or rapid speed
changes. Reduce speed and use extreme caution on ALL
slopes.
Also, note that the surface condition you are on can greatly
impact your ability to safely operate this machine. Operating on
wet or slippery slopes can cause sliding and loss of
steering and control. Do not operate on slopes that are
slippery, wet, or have soft soil conditions.
If you feel unsure about operating the unit on a slope, don’t do
it. It’s not worth the risk.

4
Dixie Chopper • 6302 E. County Road 100 N. • Coatesville, IN • 46121 • www.dixiechopper.com
Thrown Objects
This unit has spinning mower blades. These blades can pick up and throw
debris that could seriously injure a bystander. Be sure to clean up the
area to be mowed and remove objects that could be thrown by the blade
BEFORE you start mowing.
This mower is equipped with an Operator Controlled Discharge Chute
(OCDC). Do not operate mower if OCDC is not properly attached. This
discharge chute has a variable adjustment from fully open to fully closed.
In the closed position it will serve to keep some of the clipped material
under the mower deck for a longer period of time, in order to enhance the
mulching capabilities, as well as function as a discharge safety shield.
This discharge chute should ALWAYS BE OPERATED IN THE DOWN
POSITION WHEN MOWING, WHILE PEOPLE ARE PRESENT IN THE
IMMEDIATE VICINITY.
Do not allow anyone in the area while the unit is running! If someone does
enter the area, shut the unit off immediately until they leave.
Moving Parts
This equipment has many moving parts that can injure you
or someone else. However, if you stay in the operator zone
(stay seated in the seat), and follow the safety rules in this
operator’s manual, the unit is safe to operate.
The mower deck has spinning mower blades that can am-
putate hands and feet. Do not allow anyone near the unit
while it is running! Keep safety devices (guards, shields, and
switches) in place and working.
To help you, the operator, use this equipment safely, it is
equipped with an operator-presence control system. Do
NOT attempt to alter or bypass the system. See your dealer
immediately if the system does not pass all the safety inter-
lock system tests found in this manual.
Roll Bar Use
Keep the roll bar in the raised position and fasten the seat
belt. There is no roll over protection when the roll bar is in
the down position! Do not jump off if the mower tips (it is
safer to be secured by the seat belt with the roll bar raised).
Lower the roll bar only when necessary (such as to tempo-
rarily clear a low overhanging obstacle) and NEVER remove
it. Do NOT use the seat belt when the roll bar is down.
Raise the roll bar as soon as clearance permits.

5
Dixie Chopper • 6302 E. County Road 100 N. • Coatesville, IN • 46121 • www.dixiechopper.com
Retaining Walls, Drop-offs, and Water
Retaining walls and drop-offs around steps and water are
a common hazard. Give yourself a minimum of two mower
widths of clearance around these hazards and hand-trim with
a walk behind mower or string trimmer. Wheels dropping
over retaining walls, edges, ditches, embankments, or into
water can cause rollovers, which may result in serious injury,
death, or drowning.
Overhead Obstacles
Check for overhead clearances before driving under any
objects. Do not allow the roll bar to contact low overhanging
obstacles such as tree branches and guide wires.
Fuel and Maintenance
Always disengage all drives, shutoff the engine, and remove
the key before doing any cleaning, refueling, or servicing.
CNG and vapors are extremely ammable. Do not smoke
while operating or refueling. Do not add fuel while engine
is hot or running. Allow engine to cool for at least 3 minutes
prior to adding fuel.
Do not add fuel indoors, in an enclosed trailer, garage, or any
other enclosed area that is not well ventilated.
Proper maintenance is critical to the safety and performance
of your unit. Keep the unit free of grass, leaves, and excess
oil. Be sure to perform the maintenance procedures listed in
this manual, especially periodically testing the safety system.
Enclosed Areas
Only operate this unit outdoors and away from unventilated
areas such as inside garages or enclosed trailers. The en-
gine emits poisonous carbon monoxide gas and prolonged
exposure in an enclosed area can result in serious injury or
death.

6
Dixie Chopper • 6302 E. County Road 100 N. • Coatesville, IN • 46121 • www.dixiechopper.com
Using This Manual
The general operation, adjustment, and maintenance procedures contained in this manual are meant
for both the beginner and the experienced Dixie Chopper operator. Obviously, operating conditions
will vary greatly for each person’s situation; every individual case cannot be addressed here. With ex-
perience, operators should have no trouble developing good operating skills for the safe and effective
handling of most conditions.
Unless otherwise stated, the directional references used in this manual, forward, backward, right or
left, refer to an operator orientation of being seated on the mower, facing forward.
Illustrations and photographs used in this manual were current at the time of the printing of the man-
ual. However, production changes may have occurred after the time of the purchase of your Dixie
Chopper; therefore, your unit may vary slightly from what is depicted in this manual.
Dixie Chopper reserves the right to change, modify, alter, or improve the design of the machine, as
deemed necessary by Dixie Chopper, without notication to existing owners or purchasers of the
machines. If your machine does not appear to be congured exactly as reected in this operation
manual, or the parts manual, contact your authorized Dixie Chopper dealer for current information
and parts.
Using This Manual

7
Dixie Chopper • 6302 E. County Road 100 N. • Coatesville, IN • 46121 • www.dixiechopper.com
1. Know the location and function of the controls and how to operate them. Know how to stop quickly.
READ AND UNDERSTAND THIS OPERATION MANUAL AND THE INSTRUCTIONS FURNISHED
WITH ATTACHMENTS BEFORE ATTEMPTING TO OPERATE THIS MOWER.
2. Do not allow children to operate machine. Do not allow adults to operate machine without proper
instruction.
3. Do not carry passengers. Do not mow when children, pets, or others are present. The operator
is responsible for the safety of others within the vicinity of the operation of this mower.
4. Keep hands, feet, and clothing away from rotating blades or other rotating parts while engine is running.
5. Clear the work area of objects (wire, rocks, and debris of any kind) that can be picked up and
thrown by the mower, and possibly damage the equipment or cause personal injury to the operator
or bystanders.
6. Disengage all attachment clutches, set parking brake, and place steering speed control levers into neutral
lock (open) position before attempting to start engine.
7. Disengage power to attachments, stop engine, and remove ignition key before leaving the operator
position or leaving machine unattended.
8. Do not attempt to adjust or repair the mower deck, the drive system, the mower blades, or any moving
parts of the vehicle while the engine is running. You must disengage power to attachments, disengage
PTO, set parking brake, set steering control levers to neutral
lock, shut off the engine, and remove key before making any repairs or adjustments or attempting
any of the following tasks:
a. Deck pitch adjustment
b. Unclogging the chute
c. Checking blade mounting bolts for proper tightness at frequent intervals
d. Refueling
Failure to comply can result in personal injury or death.
9. Disengage power to attachments when transporting or not in use.
10. Attempting to use this mower on slopes exceeding 15 degrees is not recommended. Reduce
speed and exercise extreme caution on slopes to prevent tipping or loss of control. Be especially cautious
and slow down when changing directions on slopes. DO NOT mow slopes when grass is wet.
11. Stay alert for holes, rocks, and roots in the terrain which can cause the vehicle to upset. Keep away
from dropoffs.
12. When mowing uphill, avoid sudden stops to prevent tipping over. When mowing downhill, loss of traction
and/or braking ability can occur. To compensate, slightly increase ground speed and make
shallow turns gradually, until tighter control is regained.
13. Use care when pulling loads or using heavy equipment.
a. Use only approved drawbar hitch points.
b. Limit loads to those you can safely control.
c. Do not turn sharply. Use care when backing.
d. Use counterweights as advised in the Owner’s Manual.
14. Watch out for trafc when near to or crossing roads, and obey trafc laws. Disengage blades and
wait for them to stop before crossing gravel roads.
15. When using any attachments, never direct discharge of materials toward bystanders, nor allow anyone
near the vehicle while it is in operation.
16. Keep all nuts, bolts, and screws tight to be sure equipment is in safe working condition.
17. Allow engine to cool before storing in any enclosure.
18. Never attempt to operate mower while under the inuence of alcohol or drugs.
General Safety Precautions

8
Dixie Chopper • 6302 E. County Road 100 N. • Coatesville, IN • 46121 • www.dixiechopper.com
General Safety Precautions (Continued)
19. Exercise caution when using compressed natural gas (CNG).
a. Installation, inspection, and service shall be performed by qualied personnel.
b. Maximum text ll pressure not to exceed 125% of service pressure temperature corrected to 70 F.
c. If the CNG cylinder is involved in a collision, re, or becomes damaged, it must be depressurized and
removed from service for inspection.
d. The CNG cylinder should be visually inspected at least every 36 months.
20. Keep vehicle and attachments in good operating condition and keep safety devices, such as guards,
shields, and covers, in place and working.
21. Do not operate the mower or attachments if any guards are missing or not functioning properly.
22. Stop the mower and attachments, secure the mower, and inspect for damage after striking a foreign
object. Repair any damage before restarting and operating the equipment.
23. Do not change engine governor settings or overspeed the engine.
24. Disengage power to mower deck before backing up. No mower is designed to mow in reverse,
nor can it be safely operated in reverse. Dixie Chopper’s Zero Turning Radius eliminates the need for back
ing up. Simply turn the mower around within its own dimension and proceed forward.
25. Do not mow with mower blades that are out of balance or have eroded airlifts and/or split
ends.
26. Use personal protective equipment when operating mower or performing maintenance, such as (but
not limited to) protection for eyes, ears, feet, and head. Do not operate or service the mower when
barefoot or wearing open-toed sandals.
27. Use caution when handling mower blades during replacement or maintenance. Wear appropriate protective
gloves and clothing and cover the sharp cutting edges of the blades. Failure to comply can result in per-
sonal injury.
28. Operate mower only in daylight or good articial light.
29. If at all possible, do not operate mower when grass is wet.
30. Do not make sudden turns, stops, starts, reversals, or any abrupt maneuvers, especially
when negotiating slopes. The steering speed control arms are very responsive to slight movement. Rapid,
rough, or jerky manipulation of the steering speed control arms can result in damage to equipment and
personal injury.
31. Do not run the engine in an enclosure without adequate ventilation to the outside. Exhaust fumes contain
carbon monoxide which is odorless and deadly poisonous to humans. Failure to comply can result in
personal injury or death.
32. Do not work underneath the mower unless it is supported safely by jack stands with a safe working
load capacity of 1/2 ton or more, a hoist, or blocks. Failure to comply can result in personal injury or death.
33. Disconnect the spark plug wires and place the wires where they cannot contact spark plugs when setting
up, adjusting, doing repairs on, or transporting your mower. Mower can accidentally start if spark plug
wires are connected. Failure to comply can result in personal injury or death.
34. Do not touch hot parts of the mower. Failure to comply can result in personal injury.
35. Give complete and undivided attention to the job at hand.
36. Obey all safety decals.
o

9
Dixie Chopper • 6302 E. County Road 100 N. • Coatesville, IN • 46121 • www.dixiechopper.com
SAFETY INFORMATION DECALS
The following decals are intended to alert you to potential hazards and to pro-
vide you with important safety information. Should these decals become dif-
cult to read or are missing from the mower, contact you Dixe Chopper dealer for
a replacement.
DANGER
PELIGRO
KEEP HANDS 7 FEET AWAY.
DO NOT OPERATE MOWER UNLESS GUARD
OR GRASS CATCHER IS ATTACHED.
MANTENGA ALEJADOS MANOS Y PIES.
NO OPERE EL CORTACESPED A MENOS
QUE LA PROTECCION O CAPTACION DE
HIERBA ESTE COLOCADA.
30229
CAUTION
Shut off engine before refueling.
Never fill fuel tank indoors or when engine is hot.
Wipe up all spilled fuel before starting engine.
Do not smoke while refueling.
PRECAUCION
Cierre El Motor Antes De Volver A Cargar
El Tanque.
Nunca Llene El Tanque De Combustible En
Interiores O Cuando El Motor Este Caliente.
Limpie Todo Combustible Derramado Antes De
Encender El Motor.
No Fume Al Cargar Combustible.
For best performance, minimum engine RPM should be 3750 under no load.
3500 RPM
3500 RPM
Continuous operation below will result in engine over-heating and
an unacceptable quality cut. RPM may be reduced for trimming and/or other
light load duties.
If the engine cannot maintain , under a load, operator should reduce
ground speed, consult manual, and/or contact your dealer for any questions
or necessary adjustments.
NOTICE
DANGER TO AVOID INJURY, READ
OWNER’S MANUAL
PELIGRO
LEA EL MANUAL DEL
USUARIO PARA EVITAR
LESIONES.
800048
Never mow near people Never carry passengers
Never use when under influence of drugs or alcohol
Set parking brake & remove key if leaving machine
Avoid blade unless blade & engine are stopped
Use safely; machine is not a toy Avoid slippery or steep areas
Look behind machine
Keep safety devices in place and working
Remove potential thrown objects
Know location and function of controls
before backing
Nunca corte el cesped cerca de personas
No llevar pasajeros en ninguna circunstancia
No utilice el cortacesped bajo la influencia de drogas o alcohol
Coloque el freno de estacionamiento y retire la llave si abandona la maquina
Evite el contacto con las cuchillas a menos que el motor y las cuchillas esten detenidas
Sea prudente, la maquina no es un juguete
Mire detras de la maquina al retroceder
Mantenga los dispositivos de seguridad en su lugar y funcionando
Evite areas resbaladizas o empinadas
Retire objetos que la maquina pueda lanzar
Aprenda el funcionamiento y ubicacion de los controles
CAUTION
Shut off engine before refueling.
Never fill fuel tank indoors or when engine is hot.
Wipe up all spilled fuel before starting engine.
Do not smoke while refueling.
PRECAUCION
Cierre El Motor Antes De Volver A Cargar
El Tanque.
Nunca Llene El Tanque De Combustible En
Interiores O Cuando El Motor Este Caliente.
Limpie Todo Combustible Derramado Antes De
Encender El Motor.
No Fume Al Cargar Combustible.
WARRANTY TO BE USED ONLY TO COVER CORRECTION OF
MANUFACTURING DEFECTS. IT WILL NOT BE USED TO COVER
LACK OF MAINTENANCE, OPERATOR MIS-USE, NORMAL WEAR,
ACCIDENTS, CUSTOMER DIS-SATISFACTION OR TRANS-
PORTATION CHARGES TO AND FROM THE SERVICING DEALER.
NOTICE
DANGER TO AVOID INJURY, READ
OWNER’S MANUAL
PELIGRO
LEA EL MANUAL DEL
USUARIO PARA EVITAR
LESIONES.
NEVER MOW
SIDE HILL
OVER 5
NEVER MOW
UP HILL
OVER 10
NEVER MOW
SLOPE
OVER 15
NUNCA CORTE EL
CESPED LATERALMENTE
CON UNA INCLINACION
MAYOR A 5
NUNCA CORTE CESPED
CUESTA ARRIBA CON
UNA INCLINACION
MAYOR A 10
NUNCA CORTE CESPED
EN PENDIENTES CON
UNA INCLINACION
MAYOR A 15
STOP BLADE & BACK SLOWLY IF MACHINE STOPS GOING UPHILL
DETENGA LA CUCHILLA Y RETROCEDA LENTAMENTE SI LA MAQUINA DEJA DE IR CUESTA ARRIBA
800047

10
Dixie Chopper • 6302 E. County Road 100 N. • Coatesville, IN • 46121 • www.dixiechopper.com
XCALIBER Eco-Eagle
Engine
• Generac 990c.c. CNG vertical shaft V-twin four-cycle air cooled engine.
• Electric start.
• Gear-driven oil pump.
• Engine-mounted replaceable, 25 micron Generac oil lter.
• Low oil warning horn (98db).
• Dual-Stage Donaldson air cleaner with Turbo pre-cleaner.
Electrical
• 12 Volt, 450 cold cranking amps, maintenance-free battery.
• 20 amp alternator/stator with regulator-rectier.
• Seat safety switch shuts off engine when operator leaves the seat.
Fuel Capacity
• 9.0 Gas Gallons Equivalent
Seat
• Deluxe Michigan seat with arm rest, lumbar, and suspension.
Gauges
•Tachometer/Hour meter
Drive System
• (2) White Hydraulic 18 c.c. pumps.
• (2) White Hydraulics HB series hydraulic motors; 17.4 c.i. displacement with case
ush loop (“Quad Loop”).
• (2) 40-micron hydraulic lters.
• (2) Hand-operated forward/reverse steering/braking controls.
• 2.5 gallon hydraulic reservoir.
• (2) External, remote-mounted hydraulic oil coolers.
• Lubrication: Lucas 15w40 Magnum.
• Electric cooling fan mounted above hydraulic pumps.
• T-Box reservoir for easy checking and lling.
Controls
• Console mounted electric mower deck height adjustment
• (2) Hand-operated steering control levers.
• Hand operated PTO switch
• Throttle control and ignition switch.
• Choke.
• Positive lock drum-type parking brake.
• Operator controlled discharge chute. (OCDC)
Steering
• Independent control of drive wheels through steering control levers.
Brakes
• Dynamic braking through steering levers.
• Parking brake gives positive lockup of drive wheels when applied.
Main Frame
• All welded six rail tube frame using 1” X 2” X .125” steel tubing.
• Lifetime on frame materials and workmanship.
• Lifetime on stainless steel against rust.
• Stainless steel ip-up oor pan.
Specications

11
Dixie Chopper • 6302 E. County Road 100 N. • Coatesville, IN • 46121 • www.dixiechopper.com
Specications
XCALIBER Eco-Eagle (cont’d)
Main Frame
• Stainless steel ip-up oor pan.
• Suspension front fork assembles.
• Engine guard and front bumper.
• Rear hitch with 2000 lb. towing capacity.
Mower Deck
• (4) Deck leveling bolts.
• Electric Clutch
• Welded bafes.
• Deck height adjusts straight up and down so pitch is always constant.
• Floating deck mounted to rigid frame (does not run on the ground).
• Deck rollers to prevent scalping.
• Keyless sealed spindle.
• 1-1/4” Effective diameter spindle shafts with self-tightening spindle assembly.
Deck Materials
• Seven (7) gauge shell (.179” thickness).
• Seven (7) gauge reinforcing top plate (.179” thickness)(bolted, not welded).
• Total thickness in critical area =.358”.
• One piece cast iron deck spindle housing.
• Vented, split 3/16” steel deep groove pulleys.
Tires/Wheels
• Rear: 27” X 13” X 12” Turfboss IV tubeless ATV-type 4-ply rating (6-8 lbs air pressure).
• Front: 15” X 6.00” X 8” tubeless 4-ply rating.
Ground Speed
•0-9 mph forward and reverse
Cutting Height
•1”-5”
Cut Width
•66”
Machine Width
•71.5”
Length
•83”
Height
•Roll bar down 52” - up 73”
Weight
•1724 lbs
Warranty
• Three-Year Bumper to Bumper, two year parts and labor, 3rd year parts.
• Three-Year Generac engine*
• Lifetime on front forks against breakage.
• Lifetime on steering linkages and levers against breakage.
• Three-Year deck spindles.
• Dixie Chopper meets and exceeds all ANSI standards.
*See Authorized Dixie Chopper Dealer for details. *Specications are subject to change.*

12
Dixie Chopper • 6302 E. County Road 100 N. • Coatesville, IN • 46121 • www.dixiechopper.com
100% MPH x cut width = Acres per hour
99
80% MPH x cut width = Acres per hour
120
Major Features
At Dixie Chopper, we believe that every machine
should pack the maximum amount of perfor-
mance. We also believe if you listen to your cus-
tomers, they will tell you what they want; and we
have been listening to our customers for years!
In the realm of industrial lawn mowers, the
Xcaliber series is King. The Xcaliber CNG,
also known as the “Eco-Eagle”, is offered with a
cutting width of 66” and comes equipped with a
990cc Generac Engine that has been tuned to
run on CNG (Compressed Natural Gas), which
is considerably cheaper and much cleaner than
gasoline.
Productivity Chart
The following is an “Acres Per Hour” produc-
tivity chart for the Xcaliber CNG model Dixie
Chopper mower. Efciency ratings of 100% and
80% are shown. Eighty percent reects actual
mowing conditions, considering turns and over-
lapping.
MPH 100% 80%
4.0 2.67 2.20
5.0 3.33 2.75
6.0 4.00 3.30
7.0 4.67 3.85
8.0 5.33 4.40
9.0 6.00 4.95
Serial Number Identication
The Serial number of you Dixie Chopper lawn-
mower is located on the Serial Number Decal.
This decal is located on the left side of the upper
cross-member under the seat and also on the
bottom side of the seat pan.
Warranty Registration
The Warranty Registration card MUST be lled-
out and signed with the dealer. Alternatively, the
dealer may wish to perform this function online.
Specications
XCALIBER Eco-Eagle (cont’d)

13
Dixie Chopper • 6302 E. County Road 100 N. • Coatesville, IN • 46121 • www.dixiechopper.com
24
7
13
5
6
8
MOWER CONTROLS
Control/Indicator Name Control/Indicator Description
1. IGNITION SWITCH Controls electrical power to the mower. Switch has three positions: OFF--RUN--START.
In OFF position, no power ows to the mower electrical components. In RUN position,
power ows to all mower electrical components. In START position, electrical power ows
to the engine starter.
2. DECK ENGAGING
SWITCH (PTO)
Controls operation of the mower deck blades. Pull switch up to engage the mower blades,
and push it down to disengage the mower blades.
3. PARKING BRAKE LEVER Applies the brakes to hold the mower in a stationary position. Pull the lever up to set the
brakes and push it down to release the brakes.
4. THROTTLE CONTROL Controls engine speed. Moving the throttle all the way down sets the engine speed to
maximum. Moving the throttle all the way up sets the engine speed to idle.
5. STEERING SPEED
CONTROL LEVERS
Controls the speed and direction of the mower. Moving both levers forward causes the
mower to move forward and moving both levers backward causes the mower to back up.
Moving one lever forward will cause the mower to turn. The farther the levers are moved
forward or backward, the faster the mower will move in that direction. The levers may be
locked in neutral position by pushing both levers outward left and right to their respective
farthest points.
6. FUEL SUPPLY SHUT-OFF
VALVE
Controls the fuel supply from both tanks to the engine simultaneously.
7. FUEL REFILL VALVE Allows the user to rell both tanks simultaneously. (Fuel supply shut-off valve must be
open to allow to ow of fuel into the tanks)
8. ELECTRIC DECK LIFT
TOGGLE SWITCH
Controls the cutting height of the deck.

14
Dixie Chopper • 6302 E. County Road 100 N. • Coatesville, IN • 46121 • www.dixiechopper.com
Do not run the mower engine in
conned areas such as a closed garage. Take care
not to inhale exhaust gases as they contain carbon
monoxide, which is a colorless, odorless gas that
can cause unconsciousness and is potentially lethal.
Failure to comply can result in damage to equipment
and injury to persons or death to persons.
WARNING
Handle fuel with care. It is highly
ammable. Never add fuel while the engine is run-
ning or hot. Fill fuel tanks outdoors, never indoors.
Failure to comply can result in damage to equipment
and injury to persons.
WARNING
Before starting the engine, be-
come familiar with all controls. Read and understand
this Operation Manual thoroughly. Always check for
proper engine oil level before starting engine. Failure
to comply can result in damage to equipment and
injury to persons.
WARNING
To Start The Mower:
1. Place steering speed control levers in neutral
lock position.
2. Sit in mower seat.
3. Pull parking brake lever all the way up to set
parking brake.
4. Set throttle to 1/4-power position.
5. Open vavle on ONE CNG tank and turn red fuel
shut-off valve ON.
6. Turn ignition switch to the START position.
Release key after engine starts. Key will
automatically return to the RUN position.
NOTE: If the engine fails to start after 6-7
seconds of continuous cranking, turn the key to
the OFF position and allow the starter motor to
cool.
Start-Up and Operation of Mower
To Stop The Mower:
NOTE: In case of emergency, engine may
be stopped by turning the ignition key to the
OFF position.
1. Move steering speed control levers to neutral
position to stop mower movement.
2. Push deck engaging switch (PTO) down to
disengage mower deck blades.
3. Pull parking brake lever all the way up to set
parking brake.
4. Move throttle to the idle position.
5. Allow engine to idle for two minutes before
turning key off.
6. Turn ignition key to the OFF position and re-
move key, even if leaving mower unattended
for only a few minutes.
7. Close valves on CNG tanks and turn red fuel
shut-off valve OFF.
8. Using the toggle switch located on the right
fender, raise mower deck to highest position.
Safety Interlock System
The mower has a system of safety interlock switches that
will not allow the mower to start unless these conditions
are met:
• Steering speed control levers in
neutral lock position
• Deck engaging switch (PTO) off
If the seat is vacated during mowing, without position-
ing the controls as previously outlined, the engine will be
stopped by the safety interlock system.
To Mow:
1. Set mowing deck height to desired cut height
(if different from factory setting). (Refer to
Deck Height Adjustment for detailed instruc-
tions.)
2. Push parking brake lever all the way down to
release parking brake.
3. Set throttle to 50% of full RPM.
4. Engage mower deck by pulling up on deck
engaging switch (PTO).
5. Close steering speed control levers.
NOTE: Always set engine speed at full-
throttle when mowing, and maintain a minimum
of 3400 RPM and a maximum of 3750 RPM.
This engine speed will provide the necessary
airow through the engine cowling to prevent
overheating, and will maintain blade speed for
a satisfactory quality of cut. If the engine pulls
below 3400 RPM when under load, slow down
the ground speed and allow the engine to re-
cover up to the proper RPM.
6. Set throttle at the full-throttle position.
7. Steer and accelerate mower using the steering
speed control levers.

15
Dixie Chopper • 6302 E. County Road 100 N. • Coatesville, IN • 46121 • www.dixiechopper.com
Start-Up and Operation of Mower (Continued)
Deck Height Adjustment
Set the mowing deck appropriately to achieve the de-
sired height of your cut. The recommended cutting
height is 2-3 inches (5-7 cm), though your preference
may be a higher or lower cut. Tall grasses or weeds
should be cut with the mower deck set to its highest posi-
tion.
The rst time you mow, set the cut height to a little higher
than normal, then adjust accordingly as follows:
1. Refer to the deck height indicator decal located
on top of the height adjustment housing on the
right side of the oor pan.
2. Determine the appropriate hole setting for
your desired cut height.
3. Using the toggle switch on the right fender,
lift the deck.
4. Reposition the deck height pin to the selected
hole setting, then lower the deck using the toggle
switch. It will stop when it reaches the height
that has been designated.
Steering Speed Control Levers
The mower is equipped with a separate hydraulic pump
and motor for each rear wheel. The pumps are con-
trolled by the steering speed control levers. The left
lever controls the left rear wheel and the right lever con-
trols the right rear wheel.
DANGER
Do not move the steering speed
control levers too rapidly, or start and stop the
mower suddenly, especially on grades. Failure to
comply will result in personal injury or death.
To move forward, push both levers forward at the
same time, slowly and evenly.
To speed up the forward movement, push levers far-
ther forward away from you. The farther forward they
are pushed, the faster the mower will travel.
To turn, slow the mower’s ground speed, then further
slow the speed of the right wheel for a right-hand
turn, or the left wheel for a left-hand turn.
Refer to illustration shown below of steering speed
control levers’ position relative to mower wheels and
the direction in which the levers turn them. To move
in reverse, pull both levers backward at the same
time, slowly and evenly.
To speed up the backward movement, pull levers
farther back toward you. The farther back toward you
they are pulled, the faster the mower will travel.
To turn, slow the mower’s ground speed, then further
slow the speed of the right wheel for a right-hand
turn, or the left wheel for a left-hand turn.
Refer to illustration shown below of steering speed
control levers’ position relative to mower wheels and
the direction in which the levers turn them.

16
Dixie Chopper • 6302 E. County Road 100 N. • Coatesville, IN • 46121 • www.dixiechopper.com
Start-Up and Operation of Mower (Continued)
Zero Radius Turning
To execute a zero degree turn, you must put one wheel in
reverse and one wheel in forward.
Until you have practiced this procedure and acquired a feel
for the machine, it is possible to damage the turf due to
an incorrect input. Please be aware, and mindful-of, it is
possible to pull the levers back toward the operator in such
a manner that the drive wheels will spin in reverse. This is
also true for the reverse direction, that is, if the machine is
traveling in a reverse direction and the levers are suddenly,
and quickly, pushed away from the operator, it is possible
that the drive wheels will attempt to spin forward. Failure to
follow the correct procedure for zero degree turns could re-
sult in damage to the turf. When learning the zero degree
turning procedure, use reduced engine RPM and extreme
caution. During this learning procedure, keep in mind that
slightly sluggish movements may occur due to the lowered
engine RPM. The pumps perform more precisely at the
higher RPM.
Moving the Mower Without Power
NOTE: Do not exceed a speed of 2 mph when moving the
mower without power.
If it becomes necessary to move the mower when the en-
gine is inoperative, the hydraulic pumps are equipped with
bypass valves. Before moving the unit, turn the 11/16” jam
nut and the 5/16” nut counter clockwise one or two turns
or until it releases. Always make certain the two bypass
valves are returned to their operating position before start-
ing the engine.
Optimum Performance = Best Results
The mower is designed to operate most efciently
at maximum blade speeds, which are achieved
with maximum engine speed. The ground speed
of the mower should allow the mower deck blades
to maintain that maximum efcient speed. There-
fore, slow the ground speed of the mower when
cutting tall grass, grass heavy with moisture, or
mowing uphill, so as to maintain maximum blade
speed.
If ground speed is too fast or blade speed is too
slow, an uneven cut will result.
Make sure that mower deck blades are sharp to
ensure the optimum quality of cut. Refer to Blade
Replacement and Blade Sharpening procedures
for detailed instructions on how to safely and
properly maintain and sharpen mower blades.

17
Dixie Chopper • 6302 E. County Road 100 N. • Coatesville, IN • 46121 • www.dixiechopper.com
Operation Of The Mower With Mower Deck
Keep all shields and mower deck discharge chute, or OCDC, in place. Never attempt to clear dis-
charge areas or mower deck blades without disengaging mower deck, setting parking brake, shutting
off engine, and removing ignition key.
For best operation on average lawns, operate engine at 3400-3750 rpm; control ground speed with
motion control levers. Average lawns usually cut at a height between two and three inches (5-7.6 cm).
Tall grass and weeds should be cut with the mower in its highest position, making a second pass cut-
ting to height desired. Always keep mower deck blades sharp and balanced.
Mowing Speed
The mower is designed to operate most efciently at maximum blade speed (engine 3400-3750 rpm)
The speed of the mower should allow the mower deck blades to maintain this maximum speed while
mowing across turf. Slow the mower for cutting tall grass, grass that is heavy with moisture, or when
moving uphill. If ground speed is too fast, or blade speed is too slow, mowing will be uneven because
mower blades will not be able to lift grass into cutting position as mower passes over the ground.
Mowing Height
The best cutting height for you lawn has probably been established from previous experience. The
rst time you mow, set the mower to cut a little higher than you have in the past. This will help you de-
termine the best approach to uneven areas, to be sure a wider cut does not result in scalping the high
spots. In general, recommended cutting height is two to three inches (5-7.6 cm).
Very tall grass can be cut without difculty by using a little care. Set mower in its highest cutting posi-
tion and enter area slowly. If necessary, take a cut one half width of mower overlapping previously cut
area on each pass. Then, with mower set to desired height, make a nish cut over entire area.
OCDC (Operator Controlled Discharge Chute) Operation
This mower is equipped with an Operator Controlled Discharge Chute. This discharge chute has a
variable adjustment from full open to full closed.
In the full closed position it will serve to keep some of the clipping material under the mower deck
for a longer period of time, in order to enhance the mulching capabilities, as well as functioning as a
discharge safety shield. This discharge chute should ALWAYS BE OPERATED IN THE DOWN POSI-
TION WHEN MOWING, WHILE PEOPLE AR PRESENT IN THE IMMEDIATE VICINITY.
OCDC Controls
1. Handle - Used to raise and lower discharge chute.
2. Slotted Adjustment - Used to adjust position of
upper screen. May also be used to holdupper screen
between full open orfull closed. To adjust OCDC
screen move handle to raise or lower screento desired
position.
3. Upper Screen with optional bolt-on lower screen.
SAFE OPERATION OF THIS MOWER IS THE SOLE RESPONSIBILITY OF THE OPERATOR!
BE AWARE OF SURROUNDINGS AT ALL TIMES!
1
2
3
Start-Up and Operation of Mower (Continued)