DK2 Power OPC505AE User manual

CHIPPER ASSEMBLY GUIDE
MODEL: OPC505AE
5 INCH AUTO FEED CHIPPER
DETAIL K2 INC.
DK2 POWER USA
4301 S Valley View Blvd STE 10-11
Las Vegas, NV 89103
1-702-331-5353
AUTO FEED
DOT TOWABLE
KOHLER ENGINE
5IN AUTO FEED CHIPPER
REV 1 –9-19-2019
DETAIL K2, INC.
1080 Clay Avenue Unit 2
Burlington, Ontario, Canada L7L0A1
DK2 USA EAST
6245 Industrial Parkway
Whitehouse, OH 43571
PARTS AND SERVICE 702-331-5353 OR WWW.DK2POWER.COM CONTACT US
OPC505AE 5 INCH
AUTO FEED CHIPPER

STEP 1:
Open and unpack all items. Leave lots of working space.
Inspect all parts.
The CHIPPER is shipped in a crate. Remove all sides before
you begin.
1. Assemble the main feed chute with the hinges and
hardware provided.
2. Connect the wiring as shown.
NOTE: UPON INSPECTION OF PARTS IF YOU FIND ANY DAMAGE OR MISSING
PARTS PLEASE CALL DK2 POWER AT 702-331-5353 OR CONTACT US VIA
OUR WEBSITE WWW.DK2POWER.COM
WE WILL REPLACE ANY MISSING PARTS TO YOU FREE
PLEASE DO NOT RETURN TO THE STORE
REV 1 –9-19-2019

STEP 2:
1. Install the roller valve under the chute
2. Use 2 bolt hardware included.
2 BOLTS AND NUTS
REV 1 –9-19-2019

STEP 3:
1. Install the feed roller speed control to side of chute.
2. TAKE CARE TO NOT DROP ANY HARDWARE INTO THE FEED
CHUTE AND INTO THE CUTTING CHAMBER.
REV 1 –9-19-2019
2 BOLTS AND NUTS

STEP 4:
1. INSTALL THE CHIP CHUTE
2. BOLT 4 PLACES
4 BOLTS on base
REV 1 –9-19-2019